Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a refrigerator running too warm or too cold with this temperature sensor thermistor. Tracks compartment temps to maintain proper cooling cycles.
Rear roller that helps move your refrigerator smoothly. Replace if broken, cracked, or wobbling to restore easy mobility. Confirm fit by model number.
Removed all the food from the freezer and most from the fridge before starting. Tipped fridge back until I could place a 2 x 4 a couple of inches behind the front rollers. With the front of the fridge now approximately 3 to 4" off the ground you can remove the adjusting bolt and the roller assembly can be pulled out of the brackets. Slide out of the notches where that hold it into the bracket. Same to install. Read more
Secures door hinge to cabinet for proper alignment and sealing. Replace if missing, stripped, or loose to restore smooth operation. Confirm fit by model.
Protective seal grommet for hoses, tubes, or wires passing through refrigerator cabinet. Replaces cracked, worn, or missing grommets to prevent leaks.
Upper freezer bin organizes frozen foods and contains spills in bottom-mount refrigerators. Replace cracked, warped, or missing freezer pans.
Secures your refrigerator's sump or collection chamber components to prevent leaks and vibration. Replace if worn, missing, or causing loose parts.
Well kids I'm sure have broken the two drawers in the fridge although no one will own up. They are an easy fix, just replace. I haven't tackled the freezer drawer yet but don't see any issues with that as well. AppliancePartsPros was the easiest ordering process I think I've ever done. The parts were easy to find and the parts were here in just a couple of days. Read more
Rubber grommet cushions and seals wiring, hose, or shaft openings in your refrigerator. Replace if cracked, worn, or missing to prevent abrasion.
Evaporator fan was loud and eventually quit. This allowed the freezer temp to rise above 18 deg. which they activated the PF code. Replacing the evaporator fan motor fixed the problems. Read more
Replacement shelf divider for refrigerators. Installs on shelves to separate and organize items, preventing tipping. Order if original is cracked or missing.
Refrigerator running loud or not cooling well? A worn condenser fan blade reduces airflow across the coil. This DIY fix takes 15-30 minutes.
Flip-down door won't stay closed or open smoothly? This push latch secures compartment doors with a spring-action catch. Simple DIY fix in minutes.
This is a drain hose extension designed for dual evaporator refrigerators. It connects to the existing defrost drain system to route condensate water to the drain pan. Replace this part if you notice water pooling inside the refrigerator, leaking onto the floor, or ice buildup in the freezer compartment due to a clogged or damaged drain line.
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more
Left side mounting bracket for bottom-mount refrigerators. Snaps into place with screw fastening. Replace if bracket is cracked, broken, or missing.
Seals the drain tube connection to prevent leaks and ice buildup in your freezer. Replace if you see water pooling or ice forming at the freezer bottom.
Replaced clogged drain tube. Read more
Fix uneven door gaps or binding doors with this mullion pivot block. Restores proper door alignment and smooth operation. Simple DIY repair part.
Fixes flickering, dim, or non-working LED lights inside your fridge. Restores full interior lighting. Moderate DIY repair, 30-45 minutes with basic tools.
Roll out fridge. Remove left half of ceiling facia. Label all wiring harnesses before disconnecting because some have he same number of pins which could lead to sadness if interchanged Slide ware connectors upward to release from water filter and lower water solenoid. Slide hose out by pushing from interior toward back. Reinstall by reversing steps. Putty knife is used to pull upper facia forward then pull downward. 3 clips near front then a row in the back. In general this model is a... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.