Jgb635zek3ww Parts

This control panel overlay replaces the printed graphic that labels buttons and protects the range/oven control surface, restoring readable controls and a finished appearance. What it does:

• Replaces worn, faded, cracked, or peeling control graphics to restore button labeling and legibility
• Protects the underlying control surface from spills, grease, and everyday wear
• Restores a clean, factory appearance for the control console
• Helps prevent accidental damage to the keypad area by covering exposed surfaces

• One control panel overlay

• Clean and dry the control surface thoroughly before installation to ensure good adhesion
• Peel backing and align carefully; press firmly from center outward to remove air pockets
• Avoid operating the appliance or exposing the overlay to high heat until adhesive sets

The Round Valve Burner 140 is an OEM part for GE gas ranges. It regulates gas flow to a tubular burner ring, enabling tempered cooking performance. 

Causes of failure include mineral buildups obstructing valve ports, worn sealing edges letting gas escape, or broken internal components.

Symptoms of a bad round valve burner are: 

• Inaccurate or indistinct burner flame patterns
• Inability to maintain consistent flame heights 
• Responsiveness issues adjusting burner temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models.

The Drawer Glide is an OEM part for GE gas ranges. Installed on both sides of the storage drawers, these glides are responsible for providing smooth sliding motion and guided movement. 

Causes of bad glides can include wear and tear leading to compromised rollers or tracks, damage or bending inhibiting proper function, or failure of mechanical parts.

Symptoms of faulty drawer glides include:

• Difficulty opening or closing drawers  
• Noisy or grinding sounds during movement
• Visible damage or defects on the glide surfaces

This genuine OEM GE replacement is also compatible with Hotpoint, RCA, and select Kenmore models.

The Burner Bake Tube is an OEM part for GE gas ovens and ranges. It acts as the path by which gas travels from the valve to the burner, where it is ignited and the flame produced. 

Symptoms of a bad burner tube include:

• Inability to ignite or extinguish the gas flame properly  
• Burner flames that appear abnormal in color or size
• Decreased gas pressure at the burner resulting in weak flames
• Frequent sensor issues or interrupted baking 

Causes can be cracks in the tubing allowing gas leaks, blockages restricting fuel flow, or permanent damage from overheating. Installing this GE replacement restores efficient combustion ensuring reliable oven or range operation.

Compatible with Hotpoint, RCA, and select Kenmore models as well, replacing yours prevents future troubles from minor issues left unaddressed. 
 

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This left-side black door handle replaces a damaged or missing handle to restore a secure grip and the appliance's finished appearance. Designed to match the original door hardware for a straightforward replacement. What it does:

• Replaces the left door handle to provide a safe, comfortable grip for opening and closing the door
• Addresses symptoms like cracked, loose, broken, or missing handles
• Restores the appliance's exterior appearance to its intended look
• Designed to align with factory mounting points for direct replacement when compatible

• Follow the appliance manufacturer's service instructions for removal and installation
• Preserve existing mounting screws/fasteners unless new hardware is explicitly included
• Use basic hand tools; wear gloves to protect finish and avoid cuts from sharp edges

This replacement screw fastens appliance components and panels, restoring a snug, rattle-free fit. Use it to replace a missing or stripped fastener so trim, brackets, and other parts stay properly secured and aligned. What it does:

• Secures panels, brackets, trim, or burner-related parts to the chassis
• Replaces missing, damaged, rusted, or stripped fasteners
• Helps reduce vibration and rattling from loose components
• Restores proper fit and alignment of attached parts

• 1 screw

• Disconnect power; shut off gas before servicing
• Replace one screw at a time to maintain alignment and fit
• Hand-start threads to prevent cross-threading; tighten snugly without overtightening
• Wear cut-resistant gloves and use the correct driver for the head type

This factory screw secures components on GE cooking appliances. Replacing a lost or stripped fastener helps keep parts tight and aligned for safer, rattle-free operation.

• Fastens brackets, panels, trim, or burner components on a range, cooktop, or wall oven
• Replaces missing, corroded, or stripped hardware
• Helps reduce looseness, vibration, or rattling noises
• Restores proper alignment after service or cleaning

• Disconnect power and shut off gas supply. Allow the appliance to cool completely.
• Match this screw to the original and install in the same location.
• Use the correct driver; hand-tighten and avoid overtightening to prevent stripped threads or cracked parts.
• If mating threads are damaged, repair or replace the affected component before reassembly.

This manifold supply tube assembly is the pre-formed gas line that feeds the burner manifold in your gas range or cooktop. Replacing a damaged or leaking tube restores safe, consistent gas flow so burners can ignite and operate properly.

• Routes gas from the appliance inlet/regulator to the burner manifold
• Restores proper gas delivery if the original tube is cracked, kinked, or corroded
• Helps with symptoms such as multiple burners not lighting, weak/uneven flames, or a gas odor near the manifold area
• Pre-bent OEM geometry ensures correct routing and fit

• Shut off gas supply and disconnect power before servicing
• Work in a well-ventilated area; keep open flames and sparks away
• Do not bend or modify the pre-formed tube; ensure flare fittings seat squarely
• After installation, leak-test all connections with an approved leak-detection solution.

The Round Valve Burner is an OEM component specifically designed for GE gas ranges. Each burner delivers flame through a round metal valve that is mounted below the cooktop surface. 

Symptoms of a bad burner include:

• Inability to ignite or an intermittent flame 
• Irregular or unpredictable flame size regardless of control knob position
• Yellow flame or flame that encompasses the burner entirely instead of staying centered
• Gas smell emitting from the burner area when in use

Causes of burner failure can be a buildup of residue or debris in the valve mechanism over many years, wear and tear of internal parts like the thermocouple or orifice, or physical damage.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore gas ranges.

This drawer body is the metal pan that forms your range's lower drawer. Replacing a bent or rusted body restores alignment so the drawer slides smoothly, stays on its tracks, and safely supports its contents.

• Forms the structural base of the lower drawer assembly
• Attaches to the drawer front and the side glides/rails
• Keeps the drawer square and aligned for smooth travel
• Damage may cause sticking, scraping noises, sagging, or the drawer coming off track

• Disconnect power and let the appliance cool completely before servicing
• Remove the drawer; transfer the existing drawer front, handle, and any brackets to the new body as required
• Inspect and align the slides/rails, then seat the drawer on the tracks
• Test for smooth operation before loading the drawer

This left-side refrigerator door handle replaces a damaged or worn trim handle, restoring a secure grip and clean appearance. It matches original mounting points for a factory-fit look and function. What it does

• Provides the left-side grip for opening and closing the refrigerator door
• Restores proper alignment and prevents sharp edges from broken handles
• Helps eliminate rattling or loose-feel door operation caused by a damaged handle
• Matches the OEM finish for a consistent appearance

• One left-side white handle

• Designed to replace the matching left door handle; use existing fasteners unless new hardware is specified
• Tighten mounting screws to a snug fit; avoid over-torquing which can crack plastic
• Disconnect power and remove food from the door area if needed for safer access

Rear orifice holder secures the gas orifice in the rear-right burner assembly so the orifice stays correctly positioned for reliable ignition and consistent flame performance during cooking. What it does:

• Holds and aligns the gas orifice within the rear-right burner head for proper gas flow.
• Keeps the orifice stable during use to help maintain consistent flame size and heat.
• Common symptoms indicating this part may be faulty: burner fails to light, intermittent ignition, or uneven/low flame on the rear-right burner.
• Works as part of the burner assembly that interfaces with the burner head, cap, and orifice.

• Always shut off the gas supply and disconnect electrical power before beginning service.
• Remove burner cap, grate and burner head as needed to access the orifice holder; keep small parts organized.
• Reassemble carefully, verify correct seating of the orifice and holder, and perform a soap-leak check after reconnecting gas.

Replacement drawer panel that restores the exterior appearance and fit of a range's lower storage drawer. Use it to replace dented, cracked, or separated panels so the drawer closes and aligns correctly. What it does:

• Restores the front face and trim of the lower storage drawer for a finished look
• Replaces panels that are dented, cracked, bent, or cosmetically damaged
• Helps the drawer seat and align properly when the original panel is warped or loose
• Returns a worn or scuffed drawer front to match the oven's appearance

• Disconnect power to the appliance before beginning any work.
• Remove the storage drawer and existing panel to access fasteners.
• Handle edges and finished surfaces carefully to avoid scratches; use appropriate protective pads.
• Retain and reuse original screws, clips or mounting hardware unless replacements are specified by the manufacturer.

Rear orifice holder (left) secures and positions the burner orifice for the back-left gas burner, restoring proper alignment for reliable ignition and more consistent flame control when the original holder is damaged or missing. What it does:

• Holds the rear-left burner orifice in the correct position for proper gas flow and ignition.
• Helps support stable, even flame and consistent heat at the back-left burner.
• Use when the burner head sits unevenly, ignition is inconsistent, or the orifice holder is cracked, bent, or loose.
• Simple replacement can stop gas leakage paths caused by a misaligned or damaged holder.

• Turn off the appliance power and shut off the gas supply before servicing.
• Allow the cooktop and burner components to cool fully; remove grates and burner caps to access the holder.
• Replace only with the correct left rear holder and seat the orifice securely; avoid forcing parts.