Jgb635zek3ww Parts

This burner box harness is the wiring assembly that connects the range's cooktop igniters and gas valves inside the burner box, restoring reliable spark and control signals so burners ignite properly. What it does:

• Routes electrical power and ignition signals to cooktop igniters and gas valves inside the burner box
• Replaces damaged or frayed wiring that can cause intermittent ignition or no-spark conditions
• Helps stop arcing or shorting caused by chafed insulation or loose connections
• Restores proper electrical continuity between control board outputs and burner components

• One burner box wiring harness assembly as shown

• Disconnect electrical power (and gas supply where applicable) before servicing
• Access typically requires removing the range back panel or cooktop; keep fasteners organized
• Inspect connectors and mounting clips; replace any damaged clips or fasteners
• After installation, restore power and verify each burner ignites and shuts off properly; do not use if wiring shows damage

This valve control assembly regulates gas flow to a range/oven burner, restoring safe, reliable ignition and heat control. It replaces a failed control module to help burners light and maintain consistent flame levels. What it does:

• Controls gas delivery to the burner based on the range/oven control settings
• Helps the igniter light and sustain a steady flame for heating
• Stops gas flow when the controller signals shutoff for safety
• Addresses symptoms such as burners not lighting, weak or inconsistent flame, or loss of burner heat

• Turn off gas supply and disconnect electrical power before starting work
• Only install on the correct appliance model; verify model fitment before purchase
• Check all gas connections for leaks after installation using a leak detector or soapy water

This control panel overlay (T09) replaces the printed graphic layer on the front of an oven or range control panel, restoring clear labels and a clean look so controls are easier to read and use. What it does:

• Provides the printed graphics and cutouts that identify buttons, temperatures and functions on the control panel.
• Replaces faded, scratched or peeling overlays that make control markings hard to read.
• Helps protect the underlying control assembly from light wear and spills.
• Matches OEM shape and cutouts for proper alignment and fit.

• Disconnect power to the appliance and allow it to cool before beginning any work.
• Access may require removing the control trim or front panel; keep all fasteners organized for reassembly.
• Attachment methods vary by model—follow manufacturer instructions and align carefully to avoid misplacement.

This drawer panel is the front replacement piece that restores the appearance and proper closure of a damaged or worn lower appliance drawer. It provides the visible face and mounting surface needed for normal drawer use. What it does:

• Replaces a cracked, dented, scratched, or warped drawer front to improve appearance
• Provides the mounting surface and edge needed for the drawer to sit and close correctly
• Covers and protects the underlying drawer components from spills and debris
• Matches the OEM shape and hole pattern for straightforward replacement when compatible

• Disconnect power to the appliance and remove any contents from the drawer before starting.
• Handle the panel carefully; edges and mounting tabs can be sharp.
• Remove fasteners and clips from the old panel and transfer any required hardware or brackets to the new panel if applicable.

This range top is the finished surface that sits over the cooktop opening and provides the visible, color-matched work surface for your range. It restores the appliance's appearance and supports burner components for normal cooking use. What it does:

• Replaces a scratched, dented or discolored range top to improve appearance
• Supports burners and grates so burners remain properly aligned
• Helps maintain a sealed area around burner assemblies for safer operation
• Useful when the existing top is warped or damaged and affects fit

• Disconnect power and gas supply before beginning any repair
• Handle carefully to avoid scratching the finish; use appropriate protective gloves

The Black Handle and Endcap is an OEM part for GE ranges. It includes both the oven door handle as well as the decorative endcaps on either side. Providing a sophisticated look, these parts play an important aesthetic role.

The handle and endcaps are responsible for a sleek modern style. Made from durable black materials, they can resist everyday wear without showing fingerprints or other marks as easily as lighter tones.

Symptoms of a bad handle and endcaps include:

• Cracked, chipped or broken surfaces
• Loose fit that enables dirt/grime behind the endcaps
• Dull, faded or stained appearance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This door line weld assembly secures and reinforces the oven door structure to maintain alignment and a stable seal during use. It replaces a damaged or bent welded door line to restore proper door fit and operation. What it does:

• Provides the welded structural connection used in the oven door assembly
• Restores door alignment and helps maintain an effective seal after damage
• Addresses symptoms like a loose, misaligned, or sagging oven door
• Works as a direct-fit replacement when the original welded door line is worn or damaged

• Requires basic appliance disassembly; follow manufacturer instructions for door removal
• Disconnect power to the appliance before beginning any repair
• Handle sharp edges with care and use appropriate gloves

This replacement door trim restores the finished edge and appearance of the appliance door, covering the perimeter for a clean look and helping keep door components protected from everyday wear. What it does:

• Replaces damaged, cracked, or missing outer door trim to restore appearance
• Covers and protects the door edge and mounting points from chips and dings
• Helps maintain a continuous seal area by keeping trim aligned and secure
• Common symptom: visible cracks, warped or loose trim around the door edge

• Disconnect power to the appliance or unplug before starting work
• Remove the old trim carefully to avoid scratching the door finish or damaging clips
• Use appropriate tools and a helper if the door is heavy; align trim and secure fasteners per OEM instructions
• Wear gloves to protect hands from sharp edges and to avoid fingerprints on finished surfaces

This vent trim is a replacement trim piece that restores the finished edge around the appliance exhaust opening and helps direct airflow while improving appearance. Use it to replace dented, cracked, or missing trim for a clean fit. What it does:

• Covers and finishes the exhaust opening, preventing visible gaps and improving appliance appearance
• Helps guide and direct airflow from the vent outlet
• Protects internal components from large debris and keeps the vent area tidy
• Common symptom: trim is cracked, bent, loose, or missing and exposes the vent opening

• One vent trim piece

• Turn off power to the appliance before starting any work; follow all safety precautions
• May require removing nearby trim or grille panels; retain all fasteners and note their locations
• Handle edges carefully — metal trim can have sharp edges

This spacer base positions and supports components inside the appliance to maintain correct alignment and clearance, helping reduce vibration and wear. It's a simple replacement part when the original is cracked, broken, or missing. What it does:

• Provides a stable mounting surface and correct spacing for internal panels or components
• Restores proper alignment to reduce vibration, noise, and uneven operation
• Commonly replaced when the original spacer is cracked, deformed, or missing
• Helps maintain secure fastener engagement and proper component clearance

• Spacer base (single piece)

• Disconnect power to the appliance before starting any repair
• Follow manufacturer service instructions or parts diagram for correct location and orientation
• Basic hand tools typically required; inspect surrounding fasteners and mounting surfaces during installation

This window spacer assembly positions and supports the appliance door/window glass to maintain proper alignment and a snug fit. Replacing a worn or damaged spacer restores stable glass placement and helps prevent rattling or moisture buildup. What it does:

• Holds and spaces the door/window glass for correct alignment and seal
• Reduces glass movement and vibration that causes rattling noises
• Helps maintain a tight fit to limit air/moisture entry and fogging
• Replaces a cracked, warped, or missing spacer that can allow loose or misaligned glass

• Disconnect power to the appliance before beginning any disassembly
• Handle glass carefully and support it while removing or installing the spacer
• Follow OEM instructions for your model