Jgb690 Parts

This painted screw head is a cosmetic and protective cap that restores the finished look where a visible screw is used. It covers the screw head and helps match surrounding black trim for a clean appearance. What it does:

• Covers and conceals a screw head to improve appearance of panels, trim, or bezels
• Helps protect the screw head from direct exposure and reduces visible wear
• Used when trim or panels show exposed or mismatched screw heads
• Common fix when screw heads are scratched, discolored, or visually distracting

• Use the matching screw and press or snap the cap into place over the screw head
• Disconnect power and remove any panels only as recommended by your appliance manual before working near electrical components
• Avoid forcing or prying the cap; if tight, gently ease it on to prevent breakage
• Replace any damaged caps with the exact part to maintain fit and finish

This cable clamp secures the appliance power cord where it enters the cabinet, protecting wiring from pull and chafe for safer, more reliable operation. Designed to hold the cord firmly in place and prevent accidental disconnection. What it does:

• Acts as a strain relief to prevent the power cord from pulling into or away from the appliance
• Protects wiring from abrasion and sharp edges at the entry point
• Helps maintain a secure electrical connection to reduce intermittent power issues
• Commonly used where the cord passes through a rear or bottom access panel

• Disconnect power before inspecting or replacing the clamp to avoid shock or injury
• Install at the cord entry so the clamp captures the cord jacket; tighten fastener securely but do not over-torque
• Verify the cord is correctly routed and not pinched when reassembling panels
• If any wiring or the cord jacket is damaged, replace the cord before restoring power

This oven felt seal fits around the door perimeter to cushion the door and help reduce heat loss. It restores the intended door clearance and soft contact between the oven door and frame for safer, quieter operation. What it does:

• Cushions the oven door edge to prevent metal-on-metal contact and reduce rattling
• Helps limit heat and smoke from escaping the oven cavity when the door closes
• Restores proper door clearance to prevent scraping or uneven sealing
• Commonly replaced when felt is worn, compressed, torn, or missing

• One oven felt seal as shown

• High-level replacement; remove the oven door or open hinge per your service manual before replacing the seal
• Work with the oven powered off and fully cooled; disconnect power for safety
• Press the felt into the channel or adhesive area; ensure even fit around the full perimeter

This end cap is a replacement terminal cover that protects and secures exposed connector ends on the appliance. It restores a finished appearance and helps prevent accidental contact with live terminals. What it does:

• Covers and protects terminal ends and wiring from contact and debris
• Helps maintain a secure connection by holding terminals in place
• Prevents shorting or arcing caused by exposed connectors
• Useful when the original cap is cracked, missing, or damaged

• Disconnect power to the appliance before servicing to avoid electric shock
• Verify fit and orientation before snapping the cap into place over the terminals
• If terminals or wiring are damaged, replace or repair those components before installing the cap

The OVERLAY T09 is an OEM part for GE gas ranges. Located at the top of the range above the cooktop, the overlay provides an aesthetic finishing touch. 

Causes of a bad overlay include warping or discoloration from heat exposure over time. 

Symptoms of a bad overlay include:

• Cracks, gaps or peeled sections of the surface finish
• Exposed raw edges or interior insulation 
• Inability to properly mount range controls

This OEM GE replacement part is also compatible with Hotpoint, RCA and some Kenmore gas range models.

A sealed rocker switch that replaces a worn or failed control switch to restore reliable on/off or selector operation. Designed to keep contacts protected from moisture and debris for consistent performance. What it does:

• Provides a user-facing rocker control to open/close electrical circuits for the appliance function.
• Replaces switches that cause intermittent operation, no response, or stuck on/off conditions.
• Sealed design helps protect internal contacts from moisture, spills, and dirt that can cause failures.
• Matches the OEM form and mounting for a direct-fit replacement when the original switch is damaged.

• Disconnect power or unplug the appliance before starting any repair.
• Note or photograph wire locations before removing connectors to ensure correct reinstallation.
• Basic hand tools (screwdriver, pliers) are typically required; avoid forcing wiring or terminals.

This liner drawer replaces a damaged or cracked inner refrigerator drawer to restore storage and containment in the fresh-food compartment. Durable molded plastic matches original fit for smooth sliding and easy cleaning. What it does:

• Replaces a broken, cracked or warped inner drawer that can no longer hold items securely
• Restores proper alignment so the drawer opens and closes smoothly
• Helps contain spills and keeps produce or packaged foods separated
• Improves interior organization and usable shelf space

• 1 liner drawer

• High-level replacement: remove contents, lift out old drawer and slide in the replacement; your model diagram for exact removal steps
• Use care to avoid scratching interior surfaces; wear gloves to protect hands from sharp edges
• Verify correct orientation and track engagement before loading the drawer
• If the drawer slides or tracks are damaged, inspect and replace those parts separately

This rubber bumper strip cushions and protects appliance surfaces, reducing vibration, noise and edge wear. It restores a smooth, finished edge and helps doors, drawers or panels close quietly and without rubbing. What it does:

• Provides a soft, protective buffer between moving parts and cabinet surfaces
• Reduces rattling and vibration that can occur during operation
• Prevents metal-to-metal contact and minimizes surface wear and scuffs
• Helps improve door/drawer alignment by filling small gaps where designed to sit

• Follow OEM instructions for location; typically presses into a channel or adheres along an edge
• Clean and dry the mounting surface before installing for best fit and adhesion
• If the part fits into a track, align ends and press firmly; avoid forcing parts that don't seat easily
• Disconnect power or water and use basic hand tools as needed

This orifice holder assembly secures the gas orifice and aligns the burner to ensure consistent fuel flow for cooktop burners. It restores proper gas delivery for safe, even burner ignition and heating performance. What it does:

• Holds the gas orifice in place and positions it under the burner for correct flame shape
• Directs gas from the valve to the burner head to enable consistent ignition
• Commonly replaced when burners sputter, produce uneven flames, or fail to light reliably
• Fits into the burner/burner base area and interfaces with the valve/orifice

• Turn off gas supply and disconnect power to the appliance before servicing
• Use basic hand tools; handle orifices and small parts carefully to avoid damage
• After installation, check for gas leaks and confirm proper ignition and flame pattern

Back