Jgb720dejbb Parts

This vent trim is the exterior trim piece that covers and directs the oven/range vent opening for a finished look and proper airflow path. It restores appearance and seals the vent perimeter. What it does:

• Covers the vent opening to hide internal components and improve the appliance's appearance
• Helps guide exhaust airflow from the oven cavity to the external vent area
• Replaces cracked, warped, discolored, or missing vent trim that causes unsightly gaps
• Prevents small debris from entering the vent opening

• One vent trim

• Turn off power to the appliance before starting work to avoid electrical hazards
• Remove any damaged trim and retain fasteners; inspect mounting area for damage before installing the new trim
• Align trim carefully and secure using the original screws or clips; avoid over-tightening to prevent cracking

The Elbow 90° Asm is an OEM replacement part for GE gas ranges. It joins sections of burner piping at precise right angles, guiding fuel and air flow to burner heads.  

Causes of a bad elbow joint can be wear from years of vibrations, cracks developing from heat cycling, or accidental damage during maintenance.

Symptoms of a faulty elbow include: 

• Yellow burner flames or incomplete combustion
• Gas smell or leaks around pipes  
• Reduced heat levels from affected burners
• Premature deterioration of other components

This GE replacement is compatible with Hotpoint, RCA, and Kenmore models too.

This orifice holder secures the burner orifice to a gas range or cooktop, positioning the orifice for a consistent gas flow and reliable ignition. Replaces a worn or damaged holder to restore correct burner alignment and flame performance. What it does:

• Holds the burner orifice in the correct position so gas flows properly to the burner
• Helps maintain an even, steady flame for consistent cooking performance
• Can resolve burner issues like weak or uneven flames or burners that fail to light
• Prevents orifice movement that can cause inefficient combustion or ignition problems

• One orifice holder

• Turn off the appliance and shut off the gas supply before starting; disconnect power if applicable
• Replace only with the correct OEM part for your model to ensure proper fit and orifice alignment
• Hand-start threads and tighten securely; avoid over-tightening which can damage the holder
• After installation, restore gas and power, then test burners and check for leaks (use a soapy water solution, never an open flame)

A replacement orifice holder that secures the burner orifice to the gas tube, ensuring proper alignment for consistent flame and reliable ignition. Fits compatible gas ranges and ovens to restore correct burner operation. What it does:

• Holds the gas orifice in place on the burner tube so fuel is delivered to the burner correctly
• Helps maintain an even, stable flame for consistent cooking temperatures
• Can resolve symptoms like weak or uneven flames and ignition problems related to a loose or misaligned orifice
• Works with OEM orifices and burner assemblies as part of the gas delivery system

• One orifice holder

• Turn off the appliance power and shut off the gas supply before servicing
• Use correct tools and thread engagement; hand-start threads then tighten securely to avoid leaks
• After installation, check all connections for leaks with a safe method (soapy water) and follow local codes

This orifice holder secures the burner orifice and positions gas flow to the cooktop/oven burner for reliable ignition and stable flame. It replaces a worn or damaged holder to restore proper burner alignment and operation. What it does:

• Holds the burner orifice in place so gas is delivered correctly to the burner
• Helps maintain a steady flame for even cooking and consistent ignition
• Can resolve issues where a burner won't light or produces a weak/uneven flame
• Keeps the orifice aligned with the burner tube to prevent gas flow restrictions

• Turn off gas supply and electrical power before starting any service
• Remove burner grates and caps to access the orifice holder; replace with the exact part
• Reassemble components carefully and restore gas; check for leaks using a soap solution or approved gas leak detector

This control bracket secures the appliance control assembly or console in place, keeping the control board and user interface stable for reliable operation and proper button/knob alignment. What it does:

• Mounts and supports the control board or console to the cabinet or frame
• Prevents the control assembly from shifting, vibrating, or rubbing against other components
• Helps maintain proper button/knob alignment and electrical connection stability
• Can cause a loose or misaligned control panel or intermittent button response when damaged or missing

• One control mounting bracket

• Disconnect power to the appliance before starting any repair
• Handle control board and wiring with care to avoid ESD or connector damage
• Use the original fasteners or recommended replacements and torque evenly

This vent trim is the exterior trim piece that finishes the vent opening on your range or oven, restoring a clean, factory look and helping cover the gap where the appliance vents. What it does

• Replaces damaged, dented, or missing vent trim to restore appliance appearance.
• Covers and protects the vent opening edges for a finished look.
• Helps prevent small items from catching on exposed vent edges.
• Stops rattling or loose trim that may occur when the original piece is bent or broken.

• One vent trim

• Disconnect power to the appliance before beginning any repair.
• Handle trim carefully—edges can be sharp.
• May require removal of the oven door or control panel for access; refer to your model's service manual.
• Use original mounting screws or hardware; replace with manufacturer-specified parts.

This control panel overlay replaces a worn or damaged T09 large oven/control surface so buttons and labels are readable and the cooktop controls operate as intended. Restores a clean, finished appearance and clear button legends. What it does

• Covers the control area and provides the labeled button surface for the oven/control assembly
• Helps restore legible button legends and tactile feedback for membrane-style controls
• Addresses symptoms like faded, cracked, or peeling control graphics that make settings hard to read
• Works with the existing control assembly

• One control panel overlay (T09 large)

• Install only after disconnecting power to the appliance to avoid shock or damage
• Typically peels off the old overlay and adheres or snaps into place—follow OEM instructions for proper alignment
• Do not force or stretch the overlay; inspect the underlying control assembly and clean before installing

This outer door trim replaces a damaged or worn decorative outer ring on the appliance door, restoring a secure fit and finished appearance. It protects the edge of the door and improves sealing and alignment. What it does

• Replaces cracked, chipped or dented door trim to restore a flush, finished appearance
• Helps hold the door components together and maintains proper edge alignment
• Reduces visible gaps and drafts caused by damaged trim
• Useful when trim is loose, bent, or causing rubbing against the cabinet or adjacent parts

• Disconnect the appliance from power (and gas, if applicable) before beginning any work.
• Follow the appliance service manual for disassembly steps; trim installation typically requires removing the door or outer panel and securing fasteners/clips.
• Handle glass and painted surfaces carefully to avoid damage or scratching.