Jgb720sejss Parts

This glow-bar oven igniter lights the gas burner. When energized, it heats and draws current through the safety valve so the bake or broil flame ignites reliably and the oven reaches the set temperature. What it does:

• Heats and ignites the oven's bake or broil burner
• Draws the correct current to open the gas safety valve
• Can address no-heat or no-ignition conditions
• Helps resolve very slow preheat or inconsistent oven temperatures
• Useful when the igniter glows but the burner never lights

• 1 glow-bar igniter

• Disconnect power and shut off gas supply before servicing
• Access from the oven cavity; remove racks, oven bottom, and flame spreader as needed
• Handle the igniter carefully—element is fragile; avoid touching the carbide/ceramic tip
• Secure connections and route wires away from flames and high-heat areas; test operation after reassembly

The Orifice Holder is an OEM part for GE gas ranges. It secures the orifice spud in place, maintaining proper alignment of gas ports to burner tubes.  

The orifice holder prevents any movement or misalignment of gas passages, ensuring uninterrupted and precise fuel delivery. Correct positioning is critical for safe, efficient combustion and optimal heat levels.

Causes of a faulty holder can include wear and tear, damage from impact or heat exposure, or loose fasteners allowing misalignment over time.

Symptoms of a bad orifice holder include:

• Unstable or uneven burner flames  
• Inability to adjust oven temperature as needed
• Gas leaks near burner area
• Abnormal burner combustion noises

Replacing with this genuine OEM GE part restores secure orifice placement and optimized gas flow. It is also compatible with Hotpoint, KitchenAid, and select Kenmore gas range models.
 

The Electrode & Harness Assembly is an OEM part for GE gas ranges. It features ignition electrodes and a wiring harness that facilitates oven ignition. This assembly is responsible for sending high-voltage sparks to light the oven's pilot and main burners on command.

Symptoms of a bad electrode and harness assembly include:

• Oven pilot or burners failing to ignite properly
• Delayed ignition or repeated ignition attempts needed 
• Indicator lights signaling ignition errors

Causes can be cracks, wear, or damage to the insulated electrodes from repeated heating cycles. Over time this may lead to arcing or shorting of electrical connections.

Proper sparking ensures safe and reliable cooking functions. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This surface burner valve regulates gas flow to a single cooktop burner for smooth, precise flame control. Replacing a worn valve can restore reliable ignition and adjustment on the affected burner while maintaining safe operation.

• Regulates and meters gas from the manifold to one surface burner
• Works with the control knob to provide simmer-to-high flame settings
• Common failure symptoms include: burner won't ignite, weak or unstable flame, gas odor near the knob/valve area, or a knob that is hard to turn
• Labeled "270" per GE specification to match the correct valve style/position used in select models

• Disconnect power and shut off the gas supply before servicing
• Access the manifold; note the valve's position and orientation before removal
• Reassemble and check all connections for leaks using an approved leak-detection solution
• If the burner still won't light, also inspect the burner orifice, igniter, and spark system

The Electrodes & Harness H.v is an OEM replacement part for GE gas ranges. It is responsible for igniting the gas to create a flame for cooking on your range's burners. The electrodes create a spark to ignite the gas, while the harness securely connects them to the ignition system.

Symptoms of a faulty electrodes and harness assembly include:

• Weak or inconsistent burner ignition
• No spark or ignition at all
• Difficulty in lighting the burners

A bad electrodes and harness assembly can occur due to regular wear and tear, exposure to heat, or damage from spills or cleaning agents. If you experience issues such as weak or intermittent sparks, burner ignition failure, or gas leakage, it may be time to replace the old or damaged electrodes and harness assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Convection Motor is an OEM part for GE gas ranges. It is the component responsible for circulating hot air around food inside the oven cavity during convection cooking cycles. 

Causes of a bad convection motor include failed windings, worn bearings, or damage from excess heat over time.

Symptoms of a bad convection motor include:

• Inability to select convection cooking functions 
• Lack of air movement inside the oven
• Slower than normal cooking times 
• Uneven baking or roasting results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This electronic oven control board replaces a faulty control to restore oven functions and user interface. It manages bake/broil functions and the oven's display/input responses so the range operates correctly. What it does:

• Controls oven heating cycles (bake, broil, timers) through the appliance's user interface
• Manages display and keypad/touch inputs; can resolve unresponsive or blank controls
• Regulates oven temperature signals to heating elements or igniter circuits
• Helps stop erratic cycling or incorrect temperature behavior when the original board fails

• One oven control board

• Turn power to the appliance OFF at the breaker before starting any work
• Handle the control board carefully to avoid static damage; use a grounded strap if available
• Some disassembly of the control panel and removal of mounting screws/connectors is required

This LP conversion kit lets a compatible gas range use liquid propane by replacing factory orifices and related components for correct burner performance and safe operation after fuel changeover. What it does:

• Replaces orifices and parts needed to change burners from natural gas to LP
• Ensures proper flame shape and heat output when using propane
• Prevents poor combustion, uneven heating, or hard-to-light burners after conversion
• Enables safe, manufacturer-specified fuel change when installed per instructions

• Read and follow the included instructions exactly; only install on appliances specified by the manufacturer
• Shut off the gas supply and electrical power before beginning work
• After installation, check all fittings for leaks and verify proper flame and operation before regular use

This is a replacement control-panel overlay that restores the labeled buttons and appearance of your appliance's front control area. It helps make controls readable again and protects the underlying electronics from wear. What it does:

• Replaces worn, faded, or damaged control-panel graphics so settings are easy to read
• Provides a clean, finished surface over the control board and buttons
• Helps protect underlying switches and membrane contacts from dirt and spills
• Supports normal user input by keeping button legends and zones visible

• One replacement overlay

• Designed to be installed over the existing control panel; remove power before beginning
• Handle gently to avoid creasing or trapping debris; align with mounting tabs and adhesive as applicable
• If adhesive is present, clean the panel surface with a mild cleaner and let dry before applying

This door line weld assembly secures and reinforces the oven door structure to maintain alignment and a stable seal during use. It replaces a damaged or bent welded door line to restore proper door fit and operation. What it does:

• Provides the welded structural connection used in the oven door assembly
• Restores door alignment and helps maintain an effective seal after damage
• Addresses symptoms like a loose, misaligned, or sagging oven door
• Works as a direct-fit replacement when the original welded door line is worn or damaged

• Requires basic appliance disassembly; follow manufacturer instructions for door removal
• Disconnect power to the appliance before beginning any repair
• Handle sharp edges with care and use appropriate gloves

This spacer base positions and supports components inside the appliance to maintain correct alignment and clearance, helping reduce vibration and wear. It's a simple replacement part when the original is cracked, broken, or missing. What it does:

• Provides a stable mounting surface and correct spacing for internal panels or components
• Restores proper alignment to reduce vibration, noise, and uneven operation
• Commonly replaced when the original spacer is cracked, deformed, or missing
• Helps maintain secure fastener engagement and proper component clearance

• Spacer base (single piece)

• Disconnect power to the appliance before starting any repair
• Follow manufacturer service instructions or parts diagram for correct location and orientation
• Basic hand tools typically required; inspect surrounding fasteners and mounting surfaces during installation

This window spacer assembly positions and supports the appliance door/window glass to maintain proper alignment and a snug fit. Replacing a worn or damaged spacer restores stable glass placement and helps prevent rattling or moisture buildup. What it does:

• Holds and spaces the door/window glass for correct alignment and seal
• Reduces glass movement and vibration that causes rattling noises
• Helps maintain a tight fit to limit air/moisture entry and fogging
• Replaces a cracked, warped, or missing spacer that can allow loose or misaligned glass

• Disconnect power to the appliance before beginning any disassembly
• Handle glass carefully and support it while removing or installing the spacer
• Follow OEM instructions for your model

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.