Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
Right hand side
Left hand side
Secures the cooktop to the range frame. Replace this bracket if it's bent, broken, or missing to restore proper alignment and eliminate rattling.
Ordered gas tubes and igniters /clips for replacement. Read more
This bulb housing assembly holds and protects the light bulb inside your oven or range hood while providing electrical connections. It secures the bulb in the correct position and shields it from heat, grease, and food splatter during cooking. Replace this housing if the interior light doesn't work, bulbs burn out frequently, or the housing is cracked or damaged.
Control board, new oven light fixture, and receptacle along with the gasket. All I ever ask is get me the correct parts and AppliancePartsPros.com came through. Used them before to fix my gas dryer. Cheers, David Read more
The Top Burner Spark Electrode is an OEM replacement part for GE brand appliances. Compatible with select GE gas ranges, this spark electrode ensures a reliable ignition for your burners. It features a white ceramic base and a metal electrode tip.
Symptoms of a bad igniter:
The causes of a bad part can include physical damage or wear and tear over time.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
I had concluded that the igniter was going bad and ordered a new one. I also watched the video on how to replace the ignitor. The video explained that after you removed all the screws to the burner assemblies, you needed to lift the range top and replace the ignitor. They did explain that there were clips holding the top down, but implied if you exerted enough force it would pop open. I tried several times, different ways and it would not release. Then I notice that the clips were located... Read more
Replacement oven door hinge assembly for ranges. Installs on the door frame to control opening and closing. Replace if broken, cracked, or no longer springs.
By replacing the hinge. Read more
This small threaded component controls gas flow to LP gas burners and is located within the burner assembly. Replace when burners produce yellow flames, won't ignite properly, or have uneven flame patterns.
I actually fixed the issue by poking out the orifices and clearing the hole but the customer wanted to replace it anyway. Read more
Burner won't turn off or leaks gas when off? This top burner valve regulates gas flow to your range burner. DIY-friendly repair restores flame control.
I ordered the genuine part from Appliance Part Pros. I figured out how to access the valve via YouTube. It was so easy. I had it apart in minutes. I waited a few days for the part to arrive. And I was able to repair within minutes. Read more
Sent in to replace stovetop grate replacement feet. Read more
I have a GE Adora gas stove. Its a JGB605 model. The knob for the font left burner would not rotate. After looking through the manual, the parts lists on the internet, and checking some youtube videos I decided I had to replace the valve for the burner. It took maybe 30 minutes to disassemble the stove top. You will need a Torx driver. Swapping out the valve was trivial and reassembly was quick. I am always amazed that there are instructional/DIY videos for every possible thing on youtube!! The... Read more
Purchased and installed a new burner control valve after requesting technical help from Appliance Parts Pro on whether it was the gas control module or the burner control valve. Repair was somewhat difficult without instructions. Read more
Very easy, parts worked fine. Read more
This is an authentic OEM orifice holder sourced directly from the manufacturer for use on gas stoves. The orifice holder is located on the stovetop and supplies the gas to the burner base for cooking. If this part becomes bent or damaged or is missing from the stove, it should be replaced. If the orifice holder is damaged, the flame that is cooking the food may not receive a steady supply of gas, and the cooking temperature will be affected.Disconnect the power from the gas stove and shut off the gas supply. Take the grates and burner caps off the stoves. Remove the burner bases so that there is access to the top panel of the stove. Remove the screws holding the top panel in place and take the top panel off. Set the screws aside. Loosen the electrode bracket and take the orifice holder off the stove. Install the new orifice holder and tighten the mounting screw. Replace the parts removed during the repair and reconnect the gas and power.This orifice holder is a metal part that is sold individually. It is designed for use in gas ranges manufactured by General Electric.
I ordered the correct replacement parts. Looked up the correct way to install the parts Myself. And now the stove works great. Next thing to tackle is the oven. Just can't get all the parts at one time. I will know next time though not to just lift the top of the stove up without undoing the screws. Read more
This 270° burner valve controls gas flow to a single surface burner, restoring reliable flame adjustment and ignition on compatible gas ranges. Designed as a direct replacement to regain proper low-to-high flame control. What it does:
The screws ordered were the wrong type (I removed machine threads, the replacements were self threading) Not a problem.The screws fixing the burners to the top plate were badly rusted and the heads had to be drilled off. The remaining part of the screws had to be drilled out which meant that the self threading screws could then be used. Changing the valve was straight forward. No hitches whatsoever.The job took about eight hours over three days. Louis Trinidad Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.