Jgbs66eekes Parts

The range Overlay (T09) is an OEM part for GE electric ranges. It is a cosmetic layer applied over control panels to enhance aesthetics and protect sensitive electronics underneath.

Causes of a bad overlay include normal fatigue from exposure plus unexpected handling incidents.

Symptoms of an aging overlay include:

• Scuffs, cracks or bubbles appearing on glossy surfaces  
• Fraying or peeling edges exposing underlying panels
• Discoloration detracting from the appliance's appearance
• Loss of ability to safeguard delicate components

This GE part also fits Hotpoint, RCA and select Kenmore models. 

This surface burner valve regulates gas flow to a single cooktop burner for smooth, precise flame control. Replacing a worn valve can restore reliable ignition and adjustment on the affected burner while maintaining safe operation.

• Regulates and meters gas from the manifold to one surface burner
• Works with the control knob to provide simmer-to-high flame settings
• Common failure symptoms include: burner won't ignite, weak or unstable flame, gas odor near the knob/valve area, or a knob that is hard to turn
• Labeled "270" per GE specification to match the correct valve style/position used in select models

• Disconnect power and shut off the gas supply before servicing
• Access the manifold; note the valve's position and orientation before removal
• Reassemble and check all connections for leaks using an approved leak-detection solution
• If the burner still won't light, also inspect the burner orifice, igniter, and spark system

The Burner/Oven Assembly is an OEM part for GE gas ranges. It holds ignition and valve components over lower cooking surfaces. 

Causes of failure include deterioration of high-temperature seals from repeated heating cycles, stripped mounting points from frequent removal/cleaning access, and impact damage to housing structures.

Symptoms of a faulty burner/oven assembly are:

• Gas leaks around burner bases or control knobs
• Unstable or irregular flame sizes lacking responsiveness   
• Potential safety hazards from exposed connections or cracks 

This OEM part is compatible with Hotpoint and RCA gas range models as well.

The Stainless Steel Handle and Endcap is an OEM component specifically designed for GE ranges. This handle allows users to safely open and close the oven door. 

Causes of a bad handle and endcap include damage from heat exposure over time, dents or cracks from accidental bumps or falls, or stripped or worn components that impact functionality. A securely latching door is essential for both safety and appliance performance. 

Symptoms of a bad handle and endcap include:

• The oven door no longer latching properly
• Difficulty opening or closing the door 
• Excessive movement or play when door is closed
• Loose, missing, or non-functional components

This genuine OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This metal backguard restores the original rear trim and protection for your range. It covers the back area above the cooktop to improve appearance and shield the wall and control area from spills and splashes. What it does

• Replaces a dented, bent, scratched or rusted backguard to restore fit and finish.
• Covers the rear of the range to help protect the wall and control housing from spills and splatter.
• Helps align mounting points and trim for a secure, factory look.
• Suitable when the original backguard is missing, damaged, or cosmetically worn.

• Turn off power to the appliance at the breaker before starting any work.
• Removal/installation may require lifting the cooktop or removing the control panel; follow the range service manual for safe access.
• Use proper hand tools and eye protection; sheet metal edges can be sharp.

The Orifice Spud is an OEM replacement part for GE gas ranges. It is responsible for metering the flow of gas into each burner pipe, controlling the air and gas mixture for proper flame combustion.   

Symptoms of a bad orifice spud include: 

• Yellow or unstable burner flames
• Improper heating of pots and pans  
• Decreased gas pressure or cooktop output
• Gas leaks or excessive clicking from the gas valve

Causes for a bad orifice spud can include wear from contaminants over time, cracks or blockages altering gas flow, or damage from mishandling. 

This GE replacement is compatible with Hotpoint, RCA, and Kenmore models as well.

This top-door insulation replaces the foam insert behind the refrigerator/freezer door panel to help maintain interior temperature and reduce heat transfer. Restores proper door insulation for more consistent cooling. What it does

• Provides thermal insulation behind the top door panel to help keep cold in and heat out
• Helps reduce frost buildup and temperature fluctuations near the door area
• Limits air transfer that can increase compressor run-time and energy use
• Restores proper fit and support for the inner door panel

• Disconnect power to the appliance before starting any repair.
• Remove the inner door panel fasteners and lift the panel to access the old insulation; handle panels carefully to avoid damage.
• Replace with the exact OEM insulation and resecure the inner panel per manufacturer instructions.
• If clips, adhesive, or fasteners are damaged or missing, replace them before reassembly.

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This panel and cover assembly replaces a damaged or worn front control panel to restore the oven/range's exterior appearance and protect the underlying controls. It provides a finished surface and mounting for switches and displays. What it does:

• Replaces a cracked, dented, or cosmetically damaged control panel to improve appearance
• Protects control buttons, switches, and display components from spills and debris
• Provides mounting points and a finished surface for the range/oven's controls
• Helps prevent further damage to internal control components caused by a compromised outer panel

• One panel and cover assembly as shown

• Install only with the appliance powered off and unplugged or with circuit protection turned off
• Some disassembly of the appliance front or console may be required; retain all fasteners
• Verify correct orientation and secure all mounting tabs and screws to prevent rattles or gaps
• If electrical connectors or switches are present on the panel, handle with care and avoid pinching wires

This is a 10-16 Phillips pan point screw used to secure panels and components on compatible GE appliances. It replaces a missing or stripped fastener to restore proper fit and reduce vibration or rattling. What it does:

• Secures panels, brackets, or trim pieces to the appliance cabinet or internal assemblies
• Restores secure mounting when original screw is lost, damaged, or stripped
• Helps stop loose parts from vibrating or shifting during operation
• Matches the original fastener type and drive style for a proper fit

• One 10-16 Phillips pan point screw

• Use the correct Phillips screwdriver size to avoid cam-out or stripped heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastics
• Replace any stripped or damaged mating nut/threads for reliable fastening
• Disconnect power and follow appliance-specific safety steps before servicing

A welded door liner assembly that replaces a damaged or dented inner door shell to restore proper sealing and appearance. Designed as a direct-replacement inner surface for affected appliance doors. What it does

• Replaces a cracked, dented, or otherwise damaged inner door liner that can allow drafts or interfere with proper door closure.
• Restores the door's interior surface so gaskets and inner components mount correctly.
• Helps eliminate cold or heat leaks caused by a compromised liner.
• Improves door appearance and prevents further damage to internal door parts.

• Disconnect power and follow OEM service manual instructions before starting work.
• Use safe handling practices — edges may be sharp and assembly can be heavy; use gloves and eye protection.
• May require removing door panels, trim, and hardware; retain mounting screws and check gasket seating during reassembly.

This spacer base positions and supports components inside the appliance to maintain correct alignment and clearance, helping reduce vibration and wear. It's a simple replacement part when the original is cracked, broken, or missing. What it does:

• Provides a stable mounting surface and correct spacing for internal panels or components
• Restores proper alignment to reduce vibration, noise, and uneven operation
• Commonly replaced when the original spacer is cracked, deformed, or missing
• Helps maintain secure fastener engagement and proper component clearance

• Spacer base (single piece)

• Disconnect power to the appliance before starting any repair
• Follow manufacturer service instructions or parts diagram for correct location and orientation
• Basic hand tools typically required; inspect surrounding fasteners and mounting surfaces during installation

This panel side foil is a decorative side trim that restores the appliance's finished appearance and helps protect the cabinet edge from everyday wear. It's a direct-replacement exterior trim piece. What it does

• Covers and protects the outer edge of the appliance panel or door to maintain a clean, finished look
• Hides scratches, nicks, or peeled paint along the panel edge
• Restores consistent appearance after panel or door repair or replacement
• Keeps the cabinet edge sealed from light contact and minor abrasion

• One panel side foil

• High-level replacement: remove the outer panel or door to access the existing foil before installing the new piece
• Use care to avoid scratching the new foil during installation; soft cloths and non-marring tools recommended
• If adhesive or fasteners are present on the original, remove old adhesive residue and follow OEM attachment method