Jgbs86spss Parts

The Surface Burner Valve is an OEM replacement part for GE gas ranges. Located beneath each burner head, this valve regulates gas flow to its associated burner for consistent temperature control.

Causes of faulty valves often relate to corrosion or debris accumulation from gas vapors over time. Physical damage from impacts or misuse could also restrict proper valve function. 

Symptoms include:

•  Burners failing to ignite or heat properly  
•  Inability to adjust temperatures across burner settings
•  Abnormally loud noises or small flame projects during use

This genuine GE part is compatible with Hotpoint, RCA, and select Kenmore range models as well.

The Plunger Switch is an OEM part for GE gas ranges. It is an electro-mechanical component that activates the burners and bake/broil modes when the oven door is securely closed.

Causes of failure include worn contact points, damaged wiring, or defective internal components.  

Symptoms of a bad plunger switch include:

• Inability to select oven cooking functions when door is closed
• Error messages related to unsafe door conditions  
• Random activation of burners with door open 
• Failure of door interlock safety feature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models. 

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

LP conversion kit for gas ranges and ovens that provides the orifices and components needed to convert an appliance from natural gas to propane. Restores correct burner jetting for safer, more efficient flames and consistent cooking. What it does:

• Replaces orifices and adjusts fuel delivery so burners and oven operate properly on LP fuel.
• Helps address weak, uneven, or yellow-tipped flames and inconsistent burner heat after fuel type changes.
• Used when switching an appliance from natural gas to propane or when correcting LPG-specific fuel delivery issues.
• Ensures appliance runs with the correct jetting and flow characteristics for LP operation.

• LP conversion orifices and installation instructions

• Read and follow the OEM conversion instructions exactly; improper conversion can be unsafe.
• Shut off the gas supply and electrical power before beginning work; perform a leak test after completing the conversion.
• Retain original parts in case you need to revert the appliance to its original fuel configuration.

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

Replacement front frame bumper that cushions and supports the appliance's front frame or door trim, helping reduce vibration and prevent metal-on-metal contact—restoring a secure, quiet fit for the door or trim assembly. What it does:

• Cushions the front frame/door trim to prevent wear, chipping, and metal rubbing.
• Helps align and stabilize the door/frame for proper closing and fit.
• Reduces rattling and vibration noise during operation.
• Commonly replaced when the door feels loose, rubs against the cabinet, or makes noise.

• Disconnect power to the appliance before beginning any repair.
• May require removal of the door trim or front panel—use basic hand tools and keep fasteners organized.
• Seat the bumper fully in its mounting location; avoid forcing or deforming the part.

This single safety valve controls gas flow to a single burner or heating circuit, restoring safe operation and preventing unintended gas flow. It's a direct replacement part used when the valve is faulty or leaks. What it does

• Regulates and stops gas flow to the appliance when required to maintain safe operation.
• Common symptom: burner or oven won't light or stay lit.
• Common symptom: detectable gas smell near the appliance or valve area.
• Restores normal ignition response when the original valve is worn or fails.

• One safety valve (single) as pictured.

• Turn off gas supply and electrical power before starting any service.
• After installation, check all connections for leaks using an approved leak test solution and restore gas pressure per manufacturer guidance.

The GE Glass Panel Door Assembly is an OEM part for GE ranges. It forms the main barrier sealing in heat during the cooking process. 

Causes of a bad door assembly can include cracks, chips, or breaks in the glass, damage to handles or hinges over time, or issues with the door seal not forming properly.

Symptoms of a bad door assembly include:

• Improper sealing when closed, allowing heat to escape 
• Difficulty smoothly opening and closing the door  
• Appearance issues such as cracks, fogging or film on the glass
• Warping of the internal panel affecting the door closure

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

The Electrode and Harness Assembly is an OEM part for GE gas ranges. As a critical safety mechanism, it works to detect the presence of gas and spark the burners to life properly during each cooking cycle.

Causes of a faulty assembly can include cracks in electrode materials, failures in wiring insulation or connections, or sensor electrodes clogged with debris over time.  

Symptoms include: 

• Unreliable or intermittent ignition of one or more burners
• Burners that will not light at all using the Ignite function  
• Repeated safety shutoffs during use
• Error codes or sensor fault messages displayed

This GE replacement assembly ensures your appliance's gas detection and ignition system operate dependably to deliver safe, reliable stove-top cooking performance. It is also compatible with Hotpoint, RCA and select Kenmore models.
 

The Door Hinge is an OEM part for GE gas ranges. It acts as the pivot point that allows the oven door to smoothly and securely open and close. 

Symptoms of a bad hinge can include wear and tear over time, damage or bending due to excessive force applied while opening or closing the door, or failure of components that assist the door movement.  

Symptoms of a bad door hinge include:

• The door becoming misaligned and no longer closing or sealing properly 
• Difficulty or resistance when opening and closing the door
• Noise or squeaking coming from the hinge area
• Visual signs of damage or bending to the hinge itself

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Stainless Steel Handle is an OEM replacement part for GE electric range models. It provides a sturdy grip for opening and closing the oven door.

Causes of failure include loosened mounting screws from repetitive use, bent or damaged profile from impact, and corrosion affecting appearance.  

Symptoms of a faulty handle include:

• Difficulty smoothly opening and closing the oven door 
• Risk of pinched fingers if handle wobbles during operation
• Degraded aesthetic and value of the appliance over time

This OEM stainless handle also fits select Hotpoint and RCA electric ranges.

This replacement harness includes an integrated switch and connector leads to restore the electrical connection and control function between components in compatible GE appliances. It provides a direct, OEM-style wiring connection for a reliable repair. What it does

• Routes power and signal between the appliance wiring and the associated switch to enable normal control operation
• Restores interrupted or intermittent electrical connections caused by damaged or worn wiring
• Can resolve symptoms such as the appliance failing to start, intermittent control response, or functions that stop working
• Matches OEM connector types and lead lengths for a proper fit when replacements are required

• One harness with integrated switch

• Disconnect power before beginning any repair to avoid shock or damage
• Compare the new harness to the original for identical connectors and lead routing before installing
• Disconnect and reconnect only at the connector ends; do not force or bend terminals
• Secure the harness away from heat sources and moving parts; use existing clips or fasteners

A replacement burner valve cover that protects and conceals the gas valve assembly on compatible ranges, helping keep valve components clear of spills and debris for more reliable burner operation. What it does:

• Covers and protects the gas valve area from food, moisture and spills.
• Helps prevent debris from interfering with valve knobs and internal valve parts.
• Can reduce intermittent ignition or burner performance issues caused by contamination.
• Restores the finished appearance around the valve for safer, cleaner operation.

• Always shut off the gas supply and unplug the appliance before servicing.
• Use basic hand tools; handle the valve area gently to avoid disturbing fittings or tubing.
• After installation, check for gas leaks with a soapy-water solution or a proper leak detector—do not use an open flame.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

The Badge Assembly is an OEM part for GE ranges. It includes the magnetic decorative badge affixed to the front of the range. This badge displays important information such as the brand name, model number, and technical specifications.

Causes of a bad badge assembly can include damage from impacts or abrasions over time, adhesive failure from repeated heat exposure, or normal wear from routine cleaning. On a range, the badge must withstand higher cooking temperatures.

Symptoms of a bad badge assembly include:

• Faded or illegible print on the badge face
• Cracks or breaks in the plastic material
• The badge lifting or peeling away from the surface
• Missing or loose attachment clips/fasteners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.