Jgp9403ek2ss Parts

Purchase new knob problem solved Read more

Second repair after 10 years of service - igniter had cracked and spill overs were causing the others to misfire. This was a two-step process. I took apart the cooktop to see what parts were neded. Screws were all rusted, I had to drill ome out. The burner gaskets broke during the process and needed replacement. One of the burners had deformed due to excess heat. After that initial diagnose, I reassembled the cooktop without the igniters and ordered all the parts I needed. The second stage was... Read more

Replaced knobs. I found the prices much more reasonable at AppliancePartsPro. Read more

Well after looking the issue up on YouTube I first tried the cleaning of the burners no help. So I decided I needed to replace either the harness switch assembly or the spark module. I decided that since I had to remove the glass top and install either and put if all back together before I would know if it worked, I just did both at once since it seemed it had to be one or the other. Got the parts ordered for the correct model, turned off the gas and pulled the top. Took about 90 minutes,... Read more

We ordered the parts and watched the help videos. It was "almost" exact in telling us what we needed to go. Our cooktop is 16 years old and had a ton of greasy buildup that had slowly gotten down into the knobs and was a sticky mess to undo. However the parts fit perfectly, and after 2 hours of careful "home engineering" we made it happen and everything works aweome now. My dad then decided to dissect the older switches, and proclaimed that we probably could have cleaned the connecters... Read more

Removed glass cooktop. Replace burner. Tested it. Put glass cooktop back on with clear tape and rubber edge tape. Your videos are awesome and greatly simplify the process. Sorry to say the dual burner from you was way over priced. Found it from an ebay seller for almost $100 less (brand new sealed in package). Time to repair was spread over four days. Had to remove glass to determine if the problem was burner or control switch. Then order parts and wait. Then put it back together. Read more

Easily replaced the above noted parts but the best part of this 'repair' was the customer service rep who was GREAT! She easily found parts needed and had them sent out within a day. This is the 3rd time I have contacted AppliancePartsPros (3 different issues) and each time I have received the correct part/component and total support (if needed) … thank you! Read more

Replaced regulator replaced gasket Read more

Refer to Mynor T. of Draper, UT Aug. 12, 2018 write-up. I benefited greatly from the above write-up. It took me a little less time to perform this repair (excluding cleaning the assembly) due to the write-up. This GE Profile gas burner cook top is a “drop-in” model meant to be installed into counter top cut outs. The glass top edges are the actual support area for the entire cook top assembly. The burner bases (on top of the glass top) are screwed to the metal case enclosure (located beneath... Read more