Jgp945sekss Parts

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the burner head and serves to distribute the flame evenly across the surface, enhancing cooking efficiency and consistency.

Symptoms of a faulty burner cap assembly include:

• Uneven flame distribution or a yellow or orange flame.
• Difficulty igniting the burner.
• Excessive soot or unburned gas smell, indicating incomplete combustion.

The common causes of issues with the burner cap assembly include misalignment, food spillage clogging the ports, or wear and tear from regular use. These can affect the flow of gas and air, leading to inefficient combustion and poor cooking performance.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement burner wire harness that restores the ignition wiring connection for a gas range surface burner, helping re-establish consistent sparking and reliable burner ignition for safe cooking operation. What it does:

• Provides the electrical connections between the burner igniter/spark electrode and the range's ignition module/control.
• Replaces damaged, cut, or frayed wiring that can cause no-spark, intermittent ignition, or continuous clicking at the burner.
• Routes and secures ignition wires to keep connections stable and reduce heat/rub-related failures.
• Helps the ignition system deliver consistent sparks so burners light reliably.

• Disconnect electrical power and shut off the gas supply before beginning any service.
• Compare the new harness to the original; transfer and reconnect terminals one-to-one and secure any routing clips or fasteners.
• Route wires away from hot surfaces and sharp edges; avoid stretching or pinching the harness.

This grate assembly replaces a damaged or missing cooktop grate and provides a stable, heat-resistant surface for cookware. It restores proper pan support and helps ensure even heating on gas cooktops. What it does:

• Supports pots and pans over the burner so cookware sits level and stable
• Replaces warped, cracked, or missing grates that cause instability or uneven cooking
• Protects the cooktop surface from direct flame contact and wear
• Matches OEM fit and alignment to keep burner caps and flames properly centered

• One grate assembly

• Allow the cooktop to fully cool and disconnect power/gas per appliance instructions before handling
• Lift out the old grate and set the new grate into position—no special tools typically required
• Check that burner caps are seated and that the grate does not rock or obstruct burner operation

This orifice spud directs natural gas from the valve to the burner, restoring proper flame shape and more consistent heat on compatible gas ranges and cooktops. Replace when the burner flame is weak or uneven. What it does:

• Channels natural gas into the burner orifice to create a steady, correct flame.
• Replaces a worn, clogged, or damaged spud that can cause low, sputtering, or uneven flames.
• Helps restore reliable ignition and more consistent cooking temperatures.
• Designed specifically for natural gas (NG) systems — do not interchange with LP parts.

• Turn off the appliance power and shut off the gas supply before beginning work.
• After installation, check all connections for leaks and test each burner for proper flame and ignition.

This rubber rangetop bumper cushions and supports the cooktop, reducing vibration and protecting the surface from metal-on-metal contact. It helps restore proper spacing and reduces rattling or chafing from loose or missing bumpers. What it does:

• Cushions the cooktop edge to prevent scratching and wear
• Keeps the cooktop and rangetop components properly spaced and stable
• Reduces rattling, vibration, and noise during use
• Commonly replaced when bumpers are cracked, flattened, missing, or allow movement

• Remove power to the appliance and allow all surfaces to cool before servicing.
• Access may require lifting or removing the cooktop; follow manufacturer instructions for your model.
• Replace with the same style bumper to maintain proper fit and spacing.
• Use care around sharp edges.

This burner cap covers the gas burner head to protect internal parts and help shape the flame for even heat. It's a simple, low-cost replacement that restores proper burner operation and appearance. What it does:

• Covers and protects the burner head and ports from spills and debris
• Helps direct and stabilize the burner flame for more even heating
• Prevents flame lift or irregular flame patterns caused by damaged/misaligned caps
• Restores correct spacing between flame and cookware for safer cooking

• One replacement burner cap

• Turn off the range and allow all components to cool completely before handling
• Remove old cap, clean the burner head and ports of debris, then set the new cap in place aligned to fit flat
• Check that the cap sits level and does not wobble; misalignment can cause poor ignition or flame issues