Jk5500s4ss Parts

The Window Pack Assembly is an OEM part for GE ranges. This part includes the glass window and frame, which provide a clear view into the oven cavity, allowing you to monitor the cooking process without opening the door and losing heat.

Causes of a bad window pack assembly can include wear and tear over time, thermal stress from repeated heating and cooling cycles, or physical damage from impacts. 

Symptoms of a bad Window Pack Assembly include:

• Cracks or breaks in the glass
• Difficulty seeing through the window due to fogging or staining
• Heat escaping from the oven door, making the outer surface excessively hot
• Visible damage or wear to the frame or seal

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models..

The Lens Oven Light is an OEM part for GE ovens. It lights the oven cavity, allowing homeowners to view food while cooking or cleaning without opening the oven door. The lens is designed to project an even spread of light and withstand high temperatures inside the oven.

Causes of a bad lens can include cracks or breaks due to impact or excessive heat exposure over time. The polymer material used in the lens can degrade with regular use of the oven at high temperatures.

Symptoms of a bad lens include:

• Dim or no light inside the oven cavity
• Uneven or splotchy light distribution
• Cracks or breaks in the lens cover

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Left-hand oven/range door hinge that secures the door to the cabinet and helps it open and close smoothly. Replaces a worn or damaged left hinge to restore proper alignment and reduce door sag or uneven closing. What it does

• Supports the left side of the oven/range door and keeps it properly aligned.
• Guides smooth opening and closing to prevent binding or uneven movement.
• Helps the door latch and seal correctly for safe operation.
• Common fix for door sag, crooked door, or a door that won't stay open at the correct angle.

• Disconnect power to the appliance before starting any work; allow the appliance to cool.
• Remove or support the oven door per the manufacturer's instructions to avoid glass or cosmetic damage.
• Keep original mounting hardware if possible; use equivalent replacement fasteners if needed.
• After installation, verify the door opens/closes smoothly and latches properly.

This right-side door hinge secures and lets the refrigerator door swing smoothly while keeping proper alignment and a tight seal. Replace a worn or broken hinge to stop sagging, rubbing, or uneven door gaps. What it does:

• Supports the refrigerator door on the right side and enables pivoting motion.
• Maintains proper door alignment to help the gasket seal evenly.
• Commonly replaces hinges that are bent, cracked, or causing door sag or misalignment.
• Works with original hinge pins and mounting points to restore smooth operation.

• Verify door is supported before removing hinge hardware to prevent injury or damage.
• Installation requires basic hand tools and may need a second person for door alignment.
• Inspect mounting screws and hinge pins; replace damaged hardware as needed.
• Follow refrigerator manufacturer instructions for torque and alignment.

This block terminal is the wire-connection block that secures incoming power and internal wiring, restoring a safe, reliable electrical connection for the appliance. Replaces worn or damaged terminal connections to help prevent loose wires and arcing. What it does:

• Provides a secure connection point for incoming power and internal leads
• Replaces cracked, burned, or corroded terminal blocks that cause intermittent power or arcing
• Helps stop loose wires that can produce sparks, burning smells, or blown fuses/breakers
• Restores a stable electrical path so controls and heating elements receive power reliably

• One block terminal

• Always disconnect all power (unplug or shut off circuit breaker) before inspecting or replacing electrical parts
• Take a photo of wire routing and terminal screw positions before removal for correct reassembly
• Tighten terminal screws to secure wires; replace if mounting tabs or insulation are damaged

This electronic control board (T012) replaces the main appliance control module to restore user controls and cycle management. It provides a direct replacement for the oven/range control electronics so your unit can respond to settings and run cycles reliably. What it does:

• Manages user inputs, cycle selection and timing for the appliance
• Controls power to heating elements, displays and relays per selected functions
• Can resolve symptoms like a blank or unresponsive display, non-working controls, or failure to start cycles
• Works as the appliance's central logic board to coordinate safety and control signals

• One electronic control board (T012) — assembly only

• Disconnect all power to the appliance before starting any repair
• Handle the board carefully; avoid touching contacts and use anti-static precautions when possible
• Transfer any required mounting hardware, connectors or protective housings from the old board

This convection fan insulation cushions and protects the oven's convection fan assembly, helping reduce heat transfer and noise for consistent bake and roast performance. Designed to fit the factory mounting area behind the fan. What it does:

• Thermally insulates the convection fan housing to help maintain correct oven temperatures
• Helps reduce vibration and rattling noise from the fan during operation
• Protects surrounding wiring and components from direct heat exposure
• Supports proper airflow by maintaining intended clearance around the fan

• One convection fan insulation piece as shown

• For safety, disconnect power to the appliance before starting any repair
• Handle insulation with gloves to avoid irritation and prevent contamination
• Verify correct placement around the fan housing and secure any factory fasteners

This spacer hinge positions and supports the appliance door hinge to maintain correct door alignment and smooth opening. It helps restore proper fit and reduces rubbing or binding at the hinge area. What it does:

• Provides a precise shim between the hinge and cabinet to correct door alignment
• Helps stop door rubbing, uneven gaps, and binding during opening/closing
• Restores intended hinge spacing after repair or replacement of hinge components
• Works with existing hinge hardware to maintain smooth door motion

• One spacer hinge

• Unplug the appliance or disconnect power before starting work
• Support the door while removing hinge fasteners to prevent injury or damage
• Reuse existing hinge screws unless replacements are specified by the manufacturer
• Check hinge and door components for wear