Jkp54gov1bb Parts

Had to remove old glass shards, and reflector tape. Would recommend pliers. I used a utility knife and gloves. Then removed the screws on the top section of outer glass trim. This allowed me to install the metal handle brackets inside and partially behind the trim piece, before securing to new glass. During this time, I did settle the new piece of glass in the bottom track of the outer trim. I also the installed the new heat. reflector tape to the top inside edge of the door. Had to leave some... Read more

Turned power to oven off at breaker box. Opened oven door. Unscrewed 3 Phillips-head screws on chrome trim around control panel. Unscrewed 2 Phillips-head screws holding selector switch. Laid control panel down on top of closed oven door. Removed wires by hand from old switch and connected them to the same terminals on the new switch (the wire connectors pull off easily). Using pliers, snapped off all but the lowest segment of shaft on replacement switch. Put shaft through hole in control... Read more

The fan was straightforward unscrew and disconnect wires then reinstall. The gaskets required the door to be disassembled contrary to the video that was provided when purchasing the gasket for the door. Disassembly was not hard just take a lot of pictures so you get everything back into the correct place. Also, a good time to clean door frame and wash the glass. Read more

Had to remove old glass shards, and reflector tape. Would recommend pliers. I used a utility knife and gloves. Then removed the screws on the top section of outer glass trim. This allowed me to install the metal handle brackets inside and partially behind the trim piece, before securing to new glass. During this time, I did settle the new piece of glass in the bottom track of the outer trim. I also the installed the new heat. reflector tape to the top inside edge of the door. Had to leave some... Read more