Jkp705p255 Parts

This right-side door hinge secures and guides the appliance door for correct alignment and smooth operation. Replacing a worn hinge restores proper closing and prevents door sag or uneven gaps. What it does:

• Supports the door pivot and maintains correct door alignment.
• Enables smooth opening and closing of the door.
• Prevents door sag, binding, or misaligned gaps that can affect seal performance.
• Helps eliminate rubbing, scraping, or unusual door movement.

• Disconnect power to the appliance before starting and remove any stored items from the door.
• Support the door while removing/installing the hinge to prevent dropping or damage.
• Reuse existing screws only if they are undamaged; replace damaged fasteners.
• Check door alignment after installation and make minor adjustments as needed for an even seal.

This limit switch is a safety cutoff that helps stop power to heating circuits when a fault or over-temperature condition occurs, protecting the appliance and reducing fire risk. It's a direct-fit replacement part designed to restore proper safety control. What it does

• Opens the circuit to shut off heating when the temperature climbs above safe limits
• Prevents continuous heating during thermostat or control failures
• Common symptom: oven or cooktop won't heat or keeps shutting off unexpectedly
• Common symptom: burner or element fails to stay on despite control inputs

• One limit switch

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle and route wires carefully; match wire connections exactly per the wiring diagram
• If mounting hardware or connectors are missing on your unit,

A single replacement screw used to secure appliance components and restore proper fit. This OEM-design fastener replaces a missing or damaged screw so panels, brackets, or small assemblies stay properly attached. What it does

• Fastens panels, brackets, or small assemblies to maintain component alignment and stability.
• Replaces stripped, corroded, or lost screws that cause rattling or loose parts.
• Restores secure connections that can prevent vibration noise or component movement.

• One screw.

• Disconnect power and unplug the appliance before starting any work.
• Match screw head type and length to the original before installation; use the correct driver to avoid stripping.
• Tighten snugly but avoid over-torquing, which can damage threads or parts.

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.

This is a replacement screw used to secure appliance components and restore proper fit and function. Installing the correct screw prevents loose panels and noisy operation and keeps parts aligned for safe use. What it does:

• Secures panels, brackets, or small assemblies to prevent movement and vibration
• Helps stop rattling or vibration caused by missing or stripped fasteners
• Restores secure fit where a screw has been lost or damaged
• Matches the OEM fit so adjoining parts align correctly

• One replacement screw as pictured

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand first, then snug; do not overtighten to avoid cracking plastic or stripping threads
• Replace only with the same type and size screw to ensure proper fit

This keypanel board housing is the outer trim and mounting frame that secures and protects the oven/range control keypad and underlying electronics, helping maintain a clean, functional control area. It replaces a worn, cracked, or loose control-panel assembly to restore a secure keypad fit and appearance. What it does:

• Provides the mounting surface and protective cover for the keypad/control board
• Keeps wiring and electronic components secured and positioned correctly
• Prevents debris and moisture from contacting the control electronics
• Restores a flush, stable control surface when original housing is damaged or loose

• One keypanel board housing assembly as shown

• Power off and unplug the appliance or shut off breaker before servicing
• Follow OEM disassembly steps for removing the control panel to avoid damaging wiring or clips
• Handle the housing and keypad gently to avoid scratching or bending the trim

This electrical top cover protects the range's wiring and terminal connections at the rear top area, helping keep wiring secure and shielded from dust and contact hazards. It restores the factory appearance and basic wiring protection. What it does:

• Covers and protects the range's rear-top electrical terminals and wiring harness
• Helps prevent accidental contact with live terminals and reduces debris buildup
• Keeps wiring routed and secured to reduce strain on connections
• Restores the appliance's finished appearance where the cover was missing or damaged

• Disconnect power to the appliance at the breaker or unplug before servicing
• Access may require removal of a back panel or lifting the cooktop depending on model
• Secure with the original screws or fasteners; do not overtighten plastic mounting points
• If terminals or wiring show damage or corrosion, replace or repair those components before reassembly

This left-side door hinge secures and supports the appliance door, keeping it aligned for proper sealing and smooth opening. Replacing a worn hinge restores correct door fit and helps prevent gaps or uneven closing. What it does

• Supports the door's weight and guides its swing on the left side
• Maintains proper door alignment to preserve the seal and internal temperature
• Reduces sagging, rubbing, or binding when opening and closing
• Helps eliminate unusual door noises caused by worn pivot points

• Disconnect power before starting and remove food/shelves as needed to safely access the hinge
• Support the door while removing or installing the hinge to avoid damage or injury
• Use the correct tools and tighten fasteners securely but avoid over-torquing
• Handle carefully if the door has glass panels or wiring.

This oven door latch assembly secures the oven door and enables proper latching during oven operation, restoring safe door closure and allowing functions that require a locked door such as self-clean cycles. What it does:

• Replaces a worn or broken door latch so the oven door closes and stays latched
• Allows the oven to detect a closed/latched door for safe operation and self-clean cycles
• Helps stop heat loss from the oven cavity due to a door that won't fully close
• Common symptoms include a door that won't latch, a door that won't stay closed, or an oven that will not start self-clean

• One oven door latch assembly

• Disconnect power to the appliance before starting any repair
• Access may require removing the oven door or inner door panel—follow the oven's service manual
• Handle parts and glass panels carefully; wear gloves and eye protection