Js670 Parts

This part is a range control board. It is responsible for controlling all of the functions on the appliance, from setting the heat temperature, setting the timer or bake time, turning on the oven light, and controlling the burners. Allow the oven plenty of time to cool down before attempting to access and replace this part.When the control board is faulty, then the buttons and knobs will not respond. For example, the burner knob could be turned on, but the burner itself does not turn on. The digital display may not work. An error code may appear on the display. Unplug the electric range from the electrical outlet first. Wear work gloves for safety during the process.This component is sourced straight from the manufacturer. It is sold individually. This particular control board is compatible with electric ranges that are manufactured by GE.

The Infinite  Knob is an OEM replacement part for GE ranges. It allows you to easily adjust and control the heat settings of your range. A bad infinite knob can be caused by regular wear and tear, accidental damage, or exposure to heat and moisture. If you find that the knob is difficult to turn, loose, or shows signs of wear, it may be time to replace it.

Symptoms of a faulty infinite knob include:

• Difficulty in adjusting burner heat levels
• Loose or wobbly knob
• Damage or discoloration of the knob

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Terminal Block Assembly is an OEM part for GE electric ranges. It provides connections between internal wiring and the home's electrical supply.

Causes of failure can include corrosion of metal prongs from heat and moisture exposure over time, splitting insulation sheathing from continuous vibrations, or loosened mounting fasteners.

Symptoms of a faulty terminal block include:

• Intermittent or unstable power to heating elements surfaces 
• Loose, frayed, or corroded wire attachments risking electrical faults
• Inability to maintain programmed cooking temperatures

This part is also compatible with Hotpoint and RCA electric range models.

This drawer panel (white) is the outer front of the appliance's drawer. Replacing a damaged panel restores a clean, secure face and proper handle mounting so the drawer looks right and opens and closes as designed.

• Forms the visible, protective front of the drawer
• Provides mounting points for the drawer handle/pull
• Helps the drawer close flush and remain aligned
• Common fix for a dented, cracked, bent, scratched, or discolored drawer front, or loose handle mounts

• Disconnect power and allow the appliance to cool before servicing
• Remove the drawer to access fasteners; support the panel while loosening hardware
• Transfer the handle, badge, and any brackets from the old panel if required
• Align and secure the new panel with existing hardware; reinstall the drawer and check operation

The stainless steel Control Panel Overlay is an OEM part for GE electric ranges. It acts as the outer surface layer that users interact with to operate range of functions while protecting internal control boards. 

Causes include normal wear and tear of repeated use, exposure to excess moisture around the controls, accidental impacts, or failure of electronic sensors/switches it houses.

Symptoms of a bad control overlay include:

• Dulling, scratching or distortion of the stainless surface
• Loose, rattling or non-responsive control buttons   
• Water damage leading to error codes/erratic operation
• Exposed internal electronic/wiring components 

It's also compatible with Hotpoint, RCA and select Kenmore stainless models.

This gray control panel overlay is the printed faceplate for the user interface, restoring clear labels and a clean, finished look when the original graphics are worn, peeling, or damaged—without replacing the underlying keypad or electronics.

• Provides the printed button labels and icons on the control panel
• Cosmetic overlay that covers and protects the touchpad/bezel area
• Typical symptoms: cracked, peeling, bubbling, faded, or unreadable graphics
• Cosmetic part only; it does not sense button presses or fix unresponsive keys

• Disconnect power before servicing
• Remove the control panel assembly as needed to access the old overlay; carefully remove it and clean any residue
• Align and apply the new overlay; press evenly for proper adhesion
• Be aware of high-voltage components even when unplugged

This control and faceplate assembly replaces the oven's front user interface panel. It restores a clear display and responsive buttons/touch controls so you can reliably set temperatures, modes, and timers with a single factory-built replacement. What it does:

• Integrates the oven's display and keypad/touch controls in one panel
• Sends user selections to the appliance's electronic controls
• Common fix for a dead or dim display
• Addresses unresponsive or intermittent buttons/touch keys
• Replaces a cracked, worn, or damaged front faceplate

• 1 control and faceplate assembly

• Disconnect power at the breaker before servicing
• Support the panel when removing mounting screws to avoid pulling on wiring
• Move the assembly carefully and seat all electrical connectors firmly
• Restore power and test all keys and display functions before finalizing reassembly

Replacement bracket that secures a cooktop radiant heating element, restoring stable element positioning and safer operation. Use this bracket when the original is bent, cracked, or no longer holds the element firmly in place. What it does:

• Secures the radiant heating element to the cooktop so the element stays aligned and stable.
• Helps prevent element sagging or movement that can cause uneven heating or rattling.
• Keeps element terminals positioned for proper contact with the cooktop assembly.
• Common service part when the original bracket is bent, broken, or corroded.

• Disconnect power at the breaker and ensure the cooktop and element are fully cool before starting.
• Remove damaged bracket and fasten the replacement using the original screws or clips; confirm element alignment before restoring power.
• Use basic hand tools and avoid overtightening fasteners to prevent bracket or element damage.

This broil element replaces the upper heating element in the oven to restore broiling performance and even top-heat cooking. Direct-fit element designed to heat quickly and deliver consistent browning and searing results. What it does:

• Heats the top of the oven for broiling, browning, and finishing dishes
• Restores broil function when the element is visibly burned, broken, or not heating
• Works with the oven's broil cycle and temperature controls for even top-side cooking
• Compatible with factory mounting and electrical connections for a straightforward replacement

• Disconnect power to the oven at the breaker before starting any repair
• Handle the element carefully to avoid bending or damaging the terminals
• Use appropriate tools to remove oven panels or racks as needed; support the element while disconnecting wires

This outer oven door panel in slate restores the exterior appearance and protects inner components from damage. It replaces a dented, scratched or discolored outer door surface so the range looks and functions as intended. What it does:

• Replaces damaged or cosmetically worn outer door surface to restore appearance
• Protects the inner door assembly and control area from impacts and spills
• Helps prevent heat escape caused by warped or bent outer door panels (common symptom: visible gaps or uneven door fit)
• Suitable when the outer face is dented, scratched, rusted, or otherwise cosmetically compromised

• One outer door panel, slate finish

• Disconnect power to the appliance before beginning any work and ensure the appliance is cool
• Removing and reinstalling the oven door may require two people to support the door safely
• Keep track of screws, clips, and gasket placement; test the door fit before full reassembly

This 10-32 threaded screw fastens appliance panels and components, restoring secure attachments and reducing vibration. It's a direct-fit fastener for assemblies that use a standard 10-32 UNC machine screw. What it does

• Secures control panels, brackets, and internal components that use a 10-32 thread.
• Stops loose parts that can rattle, vibrate, or cause misalignment.
• Replaces stripped, missing, or damaged 10-32 screws to restore proper fit.
• Works where a short machine screw with a 10-32 thread is required.

• One 10-32 threaded screw.

• Disconnect power and unplug the appliance before starting any repair.
• Use the correct screwdriver or nut driver for the screw head to avoid stripping.
• Install matching thread engagement; do not force or cross-thread.
• Tighten snugly but avoid over-torquing to prevent damage to mounting holes or plastic parts.

The Oven Control Panel Trim Kit is an OEM part compatible with GE ranges and wall ovens. It houses and frames the control panel interface, touch controls, display screen, and related electronic components of the appliance. The trim panel serves to protect these sensitive interior systems.

Causes of a bad control panel trim kit can include cracks, peeling, discoloration, or other signs of wear and damage due to repeated heat exposure during baking and roasting. The trim surrounds oven controls that endure temperature fluctuations each time the door is opened.

Symptoms of a bad oven control panel trim kit include: 

• Glitches or faulty responses from touch controls
• Water leaks behind or around the control panel 
• Visible cracking, peeling, or broken plastic sections
• Sensitivity issues or unresponsive buttons

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore wall oven models.

This electrical jumper links two terminals within the appliance's wiring to restore proper continuity for the affected circuit. Replace a burnt, damaged, or missing jumper to bring the related function back to reliable operation.

• Bridges terminals to complete or modify an electrical circuit as designed by the manufacturer
• Helps address symptoms like a specific feature not working, intermittent operation, or no power to a component
• Replace if the original shows heat damage, broken leads, or loose connections
• Direct replacement for the original jumper used in the wiring harness

• Disconnect power at the breaker or unplug the appliance before servicing
• Use your model's wiring diagram to locate the correct jumper
• Label/photograph wire positions and transfer one connection at a time
• Ensure connectors are fully seated; do not alter the factory wiring configuration

This left-hand door handle bracket secures the refrigerator door handle to the door, restoring a stable grip and proper handle alignment. Durable replacement part helps stop a loose or wobbly handle and keeps the door operating smoothly. What it does:

• Mounts the door handle to the left side of the refrigerator door
• Provides a secure anchor to prevent handle movement or sagging
• Restores proper handle alignment for comfortable opening and closing
• Helps eliminate rattling or looseness when the door is used

• One left-hand door handle bracket

• Designed for direct replacement; inspect mounting screws and handle for wear before installing
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the bracket
• Disconnect power only when working near electrical components; follow appliance safety guidance
• If screws or handle hardware are missing or damaged, replace those parts as well