Jt5500sp3ss Parts

The Stainless Outer Door is an OEM replacement part for GE ovens. The outer door panel helps to prevent heat loss and maintain consistent cooking conditions, shields the oven's interior from external elements, and allows the smooth opening, closing, and sealing of the door when in use.

Symptoms of a faulty stainless outer door include:

• Visible dents or deep scratches on the surface
• Compromised seal, resulting in heat loss
• Difficulty in opening or closing the door

A bad stainless outer door can occur due to accidental damage, dents, or scratches over time. If you notice any signs of damage or wear, such as visible dents, deep scratches, or a compromised seal, it may be time to replace the old or damaged stainless outer door with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lens Oven Light is an OEM part for GE ovens. It lights the oven cavity, allowing homeowners to view food while cooking or cleaning without opening the oven door. The lens is designed to project an even spread of light and withstand high temperatures inside the oven.

Causes of a bad lens can include cracks or breaks due to impact or excessive heat exposure over time. The polymer material used in the lens can degrade with regular use of the oven at high temperatures.

Symptoms of a bad lens include:

• Dim or no light inside the oven cavity
• Uneven or splotchy light distribution
• Cracks or breaks in the lens cover

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This right-hand door hinge secures and guides the appliance door, restoring proper alignment and smooth opening/closing. Replace a worn or damaged hinge to stop sagging, rubbing, or uneven gaps that affect seal and operation. What it does:

• Supports the door on the right side and provides the pivot point for opening and closing
• Restores correct door alignment to improve sealing and prevent drafts
• Stops sagging, scraping, or uneven door gaps that can cause poor performance
• Works with existing hinge pins and mounting hardware on compatible models

• Disconnect power and empty the door before starting to avoid injury or damage
• Support the door while removing/installing the hinge to prevent it from falling
• Use appropriate hand tools; tighten mounting screws securely but do not overtighten
• If hinge pins or trim are worn, inspect and replace them separately

This block terminal is the wire-connection block that secures incoming power and internal wiring, restoring a safe, reliable electrical connection for the appliance. Replaces worn or damaged terminal connections to help prevent loose wires and arcing. What it does:

• Provides a secure connection point for incoming power and internal leads
• Replaces cracked, burned, or corroded terminal blocks that cause intermittent power or arcing
• Helps stop loose wires that can produce sparks, burning smells, or blown fuses/breakers
• Restores a stable electrical path so controls and heating elements receive power reliably

• One block terminal

• Always disconnect all power (unplug or shut off circuit breaker) before inspecting or replacing electrical parts
• Take a photo of wire routing and terminal screw positions before removal for correct reassembly
• Tighten terminal screws to secure wires; replace if mounting tabs or insulation are damaged

This convection fan insulation cushions and protects the oven's convection fan assembly, helping reduce heat transfer and noise for consistent bake and roast performance. Designed to fit the factory mounting area behind the fan. What it does:

• Thermally insulates the convection fan housing to help maintain correct oven temperatures
• Helps reduce vibration and rattling noise from the fan during operation
• Protects surrounding wiring and components from direct heat exposure
• Supports proper airflow by maintaining intended clearance around the fan

• One convection fan insulation piece as shown

• For safety, disconnect power to the appliance before starting any repair
• Handle insulation with gloves to avoid irritation and prevent contamination
• Verify correct placement around the fan housing and secure any factory fasteners

This replacement top oven plate restores the oven's interior surface and protective covering, helping maintain proper clearance and protecting wiring and insulation from drips or direct heat. Designed to match OEM fit and form for compatible GE ranges. What it does:

• Covers the oven ceiling to protect internal components from spills and debris
• Helps maintain proper airflow and heat path by keeping the oven cavity intact
• Commonly replaced when the plate is warped, cracked, or showing heavy corrosion
• Can reduce burning odors caused by food debris contacting hot components

• Disconnect power (unplug or shut off breaker) and ensure the oven is completely cool before starting
• Use hand tools to remove mounting screws/retainers; keep fasteners for re-use unless damaged
• Handle the plate carefully—sharp edges or corrosion can cause cuts

This spacer hinge positions and supports the appliance door hinge to maintain correct door alignment and smooth opening. It helps restore proper fit and reduces rubbing or binding at the hinge area. What it does:

• Provides a precise shim between the hinge and cabinet to correct door alignment
• Helps stop door rubbing, uneven gaps, and binding during opening/closing
• Restores intended hinge spacing after repair or replacement of hinge components
• Works with existing hinge hardware to maintain smooth door motion

• One spacer hinge

• Unplug the appliance or disconnect power before starting work
• Support the door while removing hinge fasteners to prevent injury or damage
• Reuse existing hinge screws unless replacements are specified by the manufacturer
• Check hinge and door components for wear

This 6 ft conduit provides a protective, flexible channel for routing wiring between components, helping keep wiring organized and shielded from damage. It's an optional replacement for appliances that require extended wiring protection. What it does

• Protects and organizes electrical wiring by enclosing wires in a flexible conduit
• Helps reduce wear from abrasion, vibration, or contact with sharp edges
• Useful when original wiring routing needs extension or added protection
• Can reduce the chance of exposed wiring that may lead to shorts or intermittent power issues

• One 6 ft conduit

• Intended for use where an appliance's wiring routing requires a longer protective conduit;
• Use appropriate tools and secure conduit ends to strain reliefs or fittings as originally installed
• Disconnect power to the appliance before attempting any wiring work

This is a replacement screw used to secure appliance components and restore proper fit and function. Installing the correct screw prevents loose panels and noisy operation and keeps parts aligned for safe use. What it does:

• Secures panels, brackets, or small assemblies to prevent movement and vibration
• Helps stop rattling or vibration caused by missing or stripped fasteners
• Restores secure fit where a screw has been lost or damaged
• Matches the OEM fit so adjoining parts align correctly

• One replacement screw as pictured

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand first, then snug; do not overtighten to avoid cracking plastic or stripping threads
• Replace only with the same type and size screw to ensure proper fit

This hidden bake cover replaces the metal shield that protects and conceals the oven's hidden bake element, helping keep the element clean and directing heat for consistent cooking performance. What it does

• Shields the hidden bake element from spills and debris to reduce cleaning and potential damage.
• Helps direct heat from the hidden bake element for more even oven temperatures.
• Replaces a cracked, warped, or missing cover that can expose the element or allow food to fall onto it.
• Compatible with common symptom: visible damage or a missing cover after service or heavy use.

• Disconnect power to the oven at the breaker before starting any work.
• Allow the oven to cool completely; the element and surrounding parts can retain heat.
• Remove mounting screws or clips used by your model and lift the old cover out; handle carefully to avoid bending.
• The cover seats flat against the element support and reinstall fasteners securely.

A replacement hex nut used to secure appliance components and restore proper fastening. Installs quickly and helps stop loose or rattling parts caused by a missing or stripped nut. What it does

• Secures mounting studs, brackets, or components in place
• Prevents parts from shifting, vibrating, or coming loose during operation
• Replaces a missing, damaged, or corroded nut to restore reliable fastening

• One hex nut

• Disconnect power and gas before starting work
• Start threads by hand to avoid cross-threading, then tighten with the proper-size wrench
• Do not overtighten; snug until secure to avoid damaging studs or threads
• Use replacement only where the OEM hex nut is specified