Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
We ordered part from you and watched a utube on how to do. Read more
Replaced it with a new one. Used a screwdriver to pry away the panel around the inside of the door glass. Unscrewed the top and bottom screws that held the handle on the door. Removed the old handle and replaced it with a new one. Used tweezers to put the bottom screw into the bottom hole. Used old screws to mount handle since the new handle didn't come with screws. Screw only went in halfway before becoming tight, but the handle was still loose. I tried to tighten them more but the heads... Read more
I have one of those combo units with the microwave on top and the oven on the bottom. The thermometer switch located on the upper right side mounted on top of the magnetron read open on a continuity test. Replaced the thermal fuse. Everything works fine now. Note: The thermal switch on the left side read closed, the fan switch on the lower right side read open. I just watched some youtube videos on what and how to test the components. The 20A fuse was good. So I tested the thermal... Read more
I had to remove the microwave from the range and then remove the cover from the microwave to determine the exact problem. After a visual inspection then discharging the high voltage capacitor, I used a meter to test the high voltage diode and fuses. After using the meter to ohm out the magnetron, I removed it from the unit, and seeing that the hole in the end of the magnetron's tube was enlarged and burnt, as if it was arcing, I assumed it was the bad part. I ordered the parts from Appliance... Read more
Color: metallic. It measures about 6 inches wide by 4 inches deep.
There were 3 door switches. Check all the switches and it was the bottom which ran the fan. The top 2 switches were fine. Take top cover of the microware. 3 screws on top. Move the cover 1/3 to your left and the cover come of. There is screw in the front to remove the control panel Take the panel of and then take the 2 screws of which hold the switches. Check each switch and check. Read more
I purchased a new touchscreen assembly and replaced the defective part myself. The new part fit and matched the microwave perfectly. Read more
The repair went great and took about a half an hour . Now I have my vent fan back. Read more
This condenser fan motor circulates air across the condenser coils to help the refrigerator release heat and run efficiently. Replacing a worn motor restores proper airflow and can improve cooling performance. What it does: