Jvm300k002 Parts

This ventilation motor drives the exhaust/vent fan that helps move air through the appliance, restoring proper airflow and helping reduce heat and odors. Designed as a direct replacement to restore ventilation performance. What it does:

• Spins the vent fan to circulate air through the appliance cabinet and exhaust paths
• Helps reduce overheating by keeping airflow through vents and ducts
• Resolves weak or no exhaust airflow, unusual fan noise, or intermittent fan operation
• Matches OEM fit and mounting points for straightforward replacement when specified

• Disconnect power to the appliance before beginning any service
• Handle the motor and wiring carefully; match connector and mounting orientation during install
• Inspect vent housing, fan blades, and wiring harness for damage when replacing the motor

This is a white control panel assembly with integrated white LED display that replaces a worn or damaged range/stove control interface. Restores visible controls and display feedback so oven functions respond and show settings clearly. What it does:

• Replaces a cracked, faded, or non-responsive control panel and associated front display
• Restores readable LED indicators and touch/button surfaces for selecting bake, broil, timers and other functions
• Helps resolve issues where display segments are dim, buttons stick, or the panel housing is cosmetically damaged
• Works with the original electronics and wiring harness when properly mounted

• High-level replacement only; disconnect power before attempting service to avoid shock
• Panel may attach with screws and clips; handle carefully to avoid damaging attached LEDs or trim
• Reuse existing mounting hardware and wiring harness

This stainless steel outer oven door assembly replaces a damaged or worn exterior door to restore appearance and sealing. It provides a finished stainless look and a proper closure for safe, efficient oven operation. What it does:

• Replaces a dented, scratched, or bent outer oven door to restore cosmetic appearance
• Helps the oven door close properly to maintain internal temperature and cooking performance
• Replaces a door with damaged trim or exterior paneling
• Returns a clean stainless finish for a like-new exterior

• Disconnect power to the appliance before starting any repair.
• Door assemblies can be heavy and awkward—use two people to avoid injury or damage.
• Handle edges and any broken glass carefully and wear protective gloves if needed.
• Follow the manufacturer instructions for correct alignment and screw torque.

This control mounting panel secures the appliance control/console assembly, providing a stable mounting surface that helps keep buttons, switches, and electronics aligned for reliable operation and easier repairs. What it does:

• Provides a rigid mounting surface for the control/console assembly
• Keeps control board and user interface components properly aligned
• Helps prevent movement or vibration-related contact issues
• Common replacement for cracked, bent, or damaged control panels that misalign controls

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing the console or outer panel; keep fasteners organized
• Handle the control board and connectors carefully to avoid damage

The Capacitor is an OEM part for GE microwaves. It is an electronic component within the microwave's high voltage circuitry. The capacitor works to store and deliver high-voltage electrical energy from the main control board to the magnetron tube in short, powerful bursts required for microwave cooking.

Causes of failure can be due to natural breakdown of the capacitive material over time and use. Capacitors have a limited lifespan that is greatly reduced if subjected to heat, moisture or electrical surges.

Symptoms of a bad capacitor include:

• Inconsistent or incomplete cooking even at high power levels
• Slow or inefficient heating during use
• Sparking or burning smells emanating from inside the microwave

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This control panel overlay replaces the labeled face on a range/oven control panel to restore legible buttons and a clean appearance. It protects the underlying control surface and helps prevent wear-related mis-reads. What it does:

• Replaces faded, worn, or damaged control panel labeling so settings and buttons are clear
• Protects the control surface from spills, grease, and everyday wear
• Helps restore the oven/range's appearance without replacing the entire console
• Can resolve user errors caused by unreadable or missing button markings

• One control panel overlay

• Disconnect power to the appliance before beginning any work
• Some installations require removing the control panel or trim; keep fasteners and note their locations
• Peel-and-stick or screw-in methods vary by model—align carefully before securing

This side front supporter is a direct replacement support piece that helps hold and align the appliance's front panel or door assembly, restoring proper fit and reducing movement or sag. It fits where the front edge needs steady support. What it does:

• Provides structural support for the front/side edge of the appliance panel or door
• Restores proper alignment to reduce gaps, rubbing, or uneven movement
• Helps eliminate rattling, vibration, or shifting during use
• Maintains correct panel positioning for seals and latches to engage

• Disconnect power (and water supply, if applicable) before starting any repair
• Installation may require basic hand tools; follow OEM instructions for correct placement
• Inspect surrounding clips and fasteners and replace any worn hardware for best results

This metal bracket supports and secures the range/oven control panel so buttons and display stay aligned and stable during use. It restores a solid mount and correct panel fit for safe, reliable operation. What it does:

• Secures the control panel to the console so switches and display remain properly aligned
• Prevents the control panel from sagging, rattling, or shifting when using controls or cleaning
• Restores correct spacing and fit for front-facing controls and trim
• Helps eliminate intermittent contact issues caused by a loose panel

• One control panel bracket

• Disconnect power at the breaker before starting any work
• Basic hand tools (screwdriver/socket) are typically required; avoid force when removing trim
• Keep track of screws and clips—reinstall in original locations to ensure proper fit

This control panel assembly replaces the front console that houses the user controls and display for the range/oven. Restores responsive buttons and clear status readouts so you can select oven modes, set temperatures and timers. What it does:

• Replaces the main console that holds touchpads/buttons and the display for oven/range functions
• Restores proper input response when setting bake, broil, timers and clock
• Helps eliminate unresponsive keys, missing display segments or intermittent control behavior
• Works with the appliance's existing wiring harness and mounting points

• Disconnect power at the breaker before starting; electric shock hazard.
• Handle the display and ribbon/connectors carefully to avoid damage; use proper tools.
• Reconnect wiring exactly as removed; secure mounting screws to prevent vibration.

This is a binding-head screw used to fasten panels and components on compatible GE appliances. It provides secure, low-profile fastening where a binding head design is required for proper fit and alignment. What it does

• Secures panels, brackets, or small assemblies to prevent movement or rattling.
• Replaces a missing or stripped screw that causes loose parts or squeaks.
• Restores proper alignment for components that rely on the binding-head profile.
• Works where a shallow, rounded head and threaded shaft are specified.

• Use the correct driver size to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or damaging parts.
• Disconnect power and follow all appliance-specific safety procedures before accessing panels.

A replacement auxiliary burner holder for gas/electric cooktops that secures the small heating element or burner cap for stable, even cooking. Restores proper support and alignment for auxiliary burners. What it does:

• Holds and centers the auxiliary burner or element cap on the cooktop for reliable heat contact
• Helps prevent burner wobble, misalignment, and uneven heating
• Supports safe, consistent pan placement on the auxiliary cooking zone
• Fits into the cooktop assembly where the auxiliary burner is mounted

• One auxiliary burner holder (1 count)

• Basic part; remove burner cap/element and replace holder per appliance disassembly steps
• Turn off power and/or gas and disconnect the appliance before beginning work
• Handle porcelain-coated parts carefully to avoid chipping; avoid overtightening fasteners