Jvm300k002 Parts

This lower-front grille assembly restores the oven/range front trim and allows proper airflow across the appliance base. It replaces cracked, broken or loose grilles to improve appearance and maintain ventilation. What it does:

• Covers and protects the lower front opening and internal components from debris.
• Directs airflow for cooling and ventilation at the appliance base.
• Stops rattling or loose trim caused by a damaged or broken grille.
• Restores proper fit and finish to the appliance front.

• One lower-front grille assembly.

• Disconnect power (and gas if applicable) before starting any service.
• Typically secures with clips or screws behind the toe/kick panel; remove toe panel for access.
• Handle part carefully to avoid bending tabs; test fit before final fastening.

This fuse assembly is a safety component that opens the circuit when an overcurrent or short occurs, protecting the appliance's wiring and electronics. Replacing a blown fuse assembly can restore power once the underlying fault has been corrected. What it does:

• Provides overcurrent protection by interrupting power during a fault
• Helps with symptoms such as a completely dead unit, dark display/control panel, stopping mid-cycle, or repeatedly blown fuses
• Protects internal wiring and control components from damage
• Designed to fail safely to prevent further electrical issues

• 1 fuse assembly

• Disconnect power to the appliance before servicing; if hardwired, switch off the circuit breaker
• Replace only with the correct fuse type/rating specified for your model
• Identify and correct the root cause of the blown fuse (e.g., shorted wiring or component) to avoid repeat failure

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

The door assembly is an OEM part for GE microwaves. It is responsible for sealing the microwave interior and providing a secure close and protection against radiation generated during cooking. It is designed to withstand the heat and pressures generated inside the microwave, providing a reliable barrier between the cooking space and the external environment.

A bad door assembly can lead to issues such as a loose or ineffective seal, difficulty in opening or closing the door. Causes of a bad assembly can include wear and tear over time, damage to the door components, or improper handling.

Symptoms of a bad door assembly include:

• A loose or misaligned door that doesn't close properly
• Difficulty in opening or closing the door smoothly
• Visible cracks or damage to the door assembly

Replace your worn-out or damaged door assembly with this genuine OEM GE part to ensure the safe and efficient operation of your microwave. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This cover choke is a small protective cap used on compatible ranges to cover and protect the choke assembly. It prevents debris and spills from reaching the choke area so burners operate more reliably. What it does:

• Protects the choke assembly from food, grease and spills that can interfere with burner performance
• Helps maintain proper airflow around the choke for consistent ignition and flame control
• Reduces the risk of clogging or contamination that can cause weak or uneven burners
• Simple replacement can resolve symptoms like noisy or erratic burner operation when caused by debris

• One cover choke

• Turn off power and gas supply to the appliance before servicing; follow manufacturer's safety guidance
• Remove grates and burner components as needed to access the choke area; handle small parts carefully
• Inspect adjacent gaskets and burner parts for damage and clean surrounding areas before installing the new cover

This gas flame sensor detects whether a burner's flame is present so the range/oven's gas valve and ignition control can operate safely. It helps restore reliable ignition and prevents the valve from staying open when no flame is detected. What it does:

• Senses the presence of a gas flame and signals the control to keep the valve open
• Helps prevent gas flow if a flame is not detected
• Can stop ignition or cause the oven/range not to heat when failing
• Commonly replaced when burners won't stay lit or control shows ignition-related errors

• One gas flame sensor

• Turn off electrical power and shut off the gas supply before servicing
• Handle the sensor and its connector carefully to avoid damage
• Reinstall in the exact position and orientation; loose connections can cause false faults

A replacement oven lamp cover that protects and diffuses the interior light so you can see food clearly while preventing direct contact with the bulb. Fits behind the oven lamp housing to restore safe, even illumination. What it does:

• Protects the oven light bulb from food splatter, heat, and accidental contact
• Diffuses and softens the lamp output for clearer, less-glare interior visibility
• Replaces cracked, cloudy, or missing lens that can reduce oven illumination
• Helps maintain proper lamp alignment and housing coverage during use

• One lamp cover

• Disconnect power to the appliance before servicing to avoid electrical shock
• Allow the oven and bulb to cool completely before removing the old cover
• Access may require removing oven racks and/or a few screws or clips from the lamp housing
• Handle the cover carefully—glass/plastic lenses can chip or crack; tighten fasteners snugly but do not overtighten

This run capacitor helps the appliance motor start and run smoothly by storing and releasing electrical energy. Replacing a worn capacitor can restore reliable motor operation and reduce abnormal motor noise or cycling. What it does:

• Provides the brief power boost motors need to start and maintain RPM
• Helps stabilize motor voltage and improve run efficiency under load
• Commonly linked to symptoms such as motors that hum but won't start, slow or intermittent motor operation, or unusual motor noise
• Reduces stress on motor windings that can lead to premature failure when functioning properly

• One motor capacitor

• Always disconnect power at the breaker or unplug the appliance before servicing
• Capacitors can hold a charge; discharge safely
• Observe proper polarity and mounting location during installation; secure wiring and connectors

This capacitor helps the appliance motor start and run smoothly, restoring proper motor operation and reducing startup strain. Use this exact replacement to address motor performance issues. What it does:

• Provides the electrical phase shift needed for the motor to start and run
• Restores normal motor startup and running behavior
• Can resolve humming, slow or non-starting motors, and intermittent motor stalls
• Works with the motor's control circuitry to stabilize performance under load

• Always disconnect power to the appliance before starting work
• Discharge the capacitor before handling to avoid electrical shock
• Match terminals and wiring exactly to the original; secure connections firmly

This glass-halogen lamp replaces a failed interior oven/range light, restoring bright, clear illumination so you can see food and interior surfaces while cooking. Designed to match the OEM fit and function for compatible models. What it does:

• Provides bright halogen illumination for oven and range interiors
• Replaces lamps that are dim, flickering, or completely out
• Helps you monitor cooking progress and interior condition without opening the door
• Fits the OEM lamp socket and housing for a correct replacement

• Disconnect power to the appliance before replacing the lamp to avoid shock
• Allow the oven and old lamp to cool completely before handling
• Handle the new lamp with a clean cloth or gloves to avoid skin oils that can shorten bulb life