Jvx5360djbb Parts

The Charcoal Filter is an OEM part for GE range hoods. This filter plays a role in eliminating cooking odors, smoke and grease particles from the air stream before they are expelled outside. Constructed with an advanced charcoal formulation, it traps unwanted smells and microscopic debris through absorption.

Causes of a bad filter can include saturation over many absorption cycles. As contaminants accumulate in the charcoal granules, its odor-removing capability naturally declines

Symptoms of a bad charcoal odor filter include:

• Cooking odors and irritating smells lingering indoors
• Grease or residue visible on the filter housing
• Exhaust air still carrying odor particles despite ventilation
• Filter appears overly used and darker in color

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bezel fits behind the control knob on select ranges and cooktops. It finishes the opening around the valve/shaft and helps protect the control panel from spills—restoring a clean look and proper knob alignment and feel.

• Provides a finished trim ring behind the control knob
• Helps shield the control area from spills and debris
• Centers the knob on the valve/shaft for smooth operation
• Common signs to replace: cracked or missing bezel, knob sits unevenly or wobbles, cosmetic damage

• Disconnect power to the appliance; for gas models, also shut off the gas supply. Allow the surface to cool
• Pull the knob straight off the stem
• Remove the old bezel, noting tab orientation
• Align and press/snap the new bezel into place; reinstall the knob and smooth rotation

The Grease Filter is an OEM replacement part for GE range hoods. It plays a crucial role in capturing and removing grease, smoke, and odors from the air during cooking. This filter helps maintain good indoor air quality and prevents the buildup of grease in the range hood and ventilation system.

Symptoms of a bad grease filter include:

• Reduced airflow or suction power
• Visible grease accumulation on the filter or range hood surfaces
• Lingering cooking odors in the kitchen
• Discoloration or deterioration of the filter material

Causes of a bad grease filter can be attributed to normal wear and tear over time, as well as exposure to high heat and grease buildup. Proper maintenance and regular cleaning or replacement of the filter are essential to ensure efficient operation and prevent potential fire hazards.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Range Hood Light Bulb is an OEM part for GE range hoods. As a key component, it lights up the cooking surface below the hood to aid visibility while cooking. Proper lighting allows for safer food preparation by improving visibility of ingredients, pans and appliances under the hood.

Causes can be due to normal burnout over time, defects, or accidental damage. Replace yours today with this authentic GE bulb to restore optimal lighting beneath the hood. Improved visibility helps prevent accidents and ensures a pleasant cooking experience. 

Symptoms of a bad light bulb include:

• Dim or no light emitted from the range hood fixture
• Inability to clearly see the cooktop or what's happening below the hood during cooking
• Premature darkness under the range hood area

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Blower Motor Assembly is an OEM part for GE range hoods. It contains the motor that powers the centrifugal blower fan inside the hood.

The blower motor assembly works continuously during appliance operation to drive air through the ventilation system. It allows the range hood to adequately control indoor air quality above the cooktop or range.

Causes stem from normal wear of internal motor components over many years of use. Failure is also possible if the motor sustains impact or moisture damage.

Symptoms of a failed blower motor assembly include:

• Clicking or buzzing noises coming from inside the motor housing
• The blower fan ceasing to spin or rotate intermittently
• Overheating of the motor due to impaired operation

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This vented mode deflector directs exhaust airflow when the appliance is set to vented mode, restoring proper venting and helping reduce excess moisture and odors from the cabinet. Ideal replacement for damaged or worn deflectors. What it does:

• Redirects exhaust air into the vent path to support correct venting.
• Helps prevent exhaust from entering the appliance cavity or cabinet area.
• Can address symptoms such as poor venting, lingering odors, or reduced vent performance.
• Replaces cracked, warped, or otherwise damaged deflector pieces that affect airflow.

• Disconnect power to the appliance before beginning any service.
• Remove access panels or trim as required to reach the deflector; basic hand tools typically needed.
• Align the deflector to existing mounting points and fasten securely without over-tightening.

The Range Hood Damper is an OEM part for GE range hoods. It is located inside the range hood and is responsible for regulating the exhaust venting and circulation of air. The damper is designed to open and close automatically based on temperature and venting needs, allowing excess heat, smoke, and smells to escape from the cooking area. 

Causes of a bad damper can include wear and tear over time, failure of the damper motor or mechanism, or damage that prevents proper movement. 

Symptoms of a bad damper include: 

• Inadequate or poor ventilation when cooking 
• Excess heat or smoke building up under the range hood
• Strange noises coming from the damper area
• Manual movement of the damper is difficult or hindered

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Lamp Socket is an OEM part for GE range hoods. This part holds the light bulb that illuminates the cooking area beneath the hood, providing necessary lighting for better visibility while cooking.

Common causes of a bad lamp socket include wear and tear over time, exposure to heat and cooking grease, or electrical issues that can cause the socket to malfunction.

Symptoms of a bad Lamp Socket include:

• The light not turning on or flickering
• The bulb burning out frequently
• The light being dim or inconsistent
• Visible damage or corrosion on the socket

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This installation hardware kit provides the mounting pieces needed to secure your appliance during installation, helping ensure panels and trim stay properly aligned for safe, stable operation. Useful when hardware is missing, loose, or damaged. What it does:

• Supplies the factory hardware used to mount and secure appliance panels, trim, or assemblies
• Replaces missing or worn fasteners that can cause panels to shift or sit unevenly
• Restores proper fit and alignment for a finished, stable installation
• Helps eliminate rattles or movement caused by broken or loose mounting parts

• Turn off and disconnect power to the appliance before servicing
• Follow the appliance installation manual and use recommended fasteners and torque where specified
• Use common hand tools; keep small parts contained to avoid loss

The Capacitor is an OEM component specifically designed for GE range hoods. It serves an important electrical purpose by maintaining proper voltage levels in the hood during operation. The capacitor filters power supplied to electronic control boards and motors, regulating voltage fluctuations that could disrupt performance.

Symptoms of a bad capacitor include:

• Hood failing to power on at all  
• Motor or fan speed control issues 
• Electrical buzzing or humming noises coming from inside
• Burning smells detected from the unit
• Illumination malfunctions like lights not turning on

Causes of a failure can be due to general wear and tear over time from heat and electrical stresses.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.