Kbfs0evms8 Parts

This replacement discharge tube routes drained water from the washer pump to the household drain, helping the appliance remove wastewater reliably and avoid leaks at the pump connection. What it does:

• Directs pump discharge to the drain line for normal washer draining
• Replaces cracked, split, or clogged tubing that can cause water leakage
• Helps restore proper water removal when original tube is damaged or deteriorated
• Works with the washer's pump outlet and standpipe or drain hose connection

• Disconnect power and turn off the water supply before starting any repairs
• Access the pump area or lower front of the washer to remove the old tube from the pump and drain connection
• Replace and secure tubing with appropriate clamps; ensure a snug, leak-free fit
• Test with a short cycle and check for leaks after installation

This cradle secures the freezer basket inside the freezer compartment so the basket stays supported and properly aligned for smooth use. It restores stable basket positioning and helps prevent sagging or unexpected drops. What it does:

• Provides a sturdy mounting point that holds the freezer basket in place
• Keeps the basket properly aligned for smooth sliding and removal
• Prevents the basket from tilting, sagging, or falling during use
• Helps reduce noise caused by a loose or misaligned basket

• Disconnect power to the appliance or unplug before beginning repairs
• Remove the freezer basket and any contents before installing the cradle
• Typical installation uses basic hand tools; handle parts carefully to avoid damage

This replacement ladder secures and guides oven or range racks, restoring stable shelf positioning and smooth rack movement. It helps stop racks from tipping, sliding unevenly, or shifting during use. What it does:

• Provides a stable guide for oven/range racks so they slide in and out smoothly
• Prevents racks from tilting or falling when loading or removing cookware
• Reduces rattling or uneven movement caused by worn or damaged ladder guides
• Restores proper rack alignment and positioning

• Disconnect power to the appliance before beginning any work
• Remove racks and any obstructions to access the ladder mounting area
• Typically secures with clips or screws; retain hardware and install per OEM instructions

This short machine screw secures small appliance panels, trim pieces, and components to keep assemblies stable and aligned. It's a direct-fit fastener commonly used in laundry and kitchen appliances to replace lost or damaged screws. What it does:

• Fastens panels, bezels, brackets, or small components to the main appliance cabinet or subassembly
• Restores a secure fit when loose or missing screws cause rattling or misaligned parts
• Prevents further wear or damage from unsecured panels or trim
• Works where a short-length machine screw is specified by the manufacturer

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power or follow appliance safety procedures before servicing electrical appliances
• If threads are damaged, replace the mating fastener or insert rather than relying on an oversized screw

This spring hose clamp secures flexible hoses to fittings to prevent leaks and keep connections tight. It's a simple, durable retaining clip used on water and vent lines to maintain a reliable seal during operation. What it does:

• Holds a hose or duct onto a spud or barb to prevent leaks and disconnection
• Keeps hoses secure against vibration and pressure changes
• Helps stop water leaks or airflow loss caused by loose connections
• Works on flexible rubber or corrugated hoses in laundry and appliance water/vent systems

• Disconnect power and water supply before servicing the appliance.
• Relieve any pressure and drain hoses before removing the old clamp.
• Use appropriate pliers or clamp tool to expand or compress the clamp for removal and installation.
• Test for leaks after reassembly.

This small retaining clip secures appliance components in place to prevent movement and ensure reliable operation. It's a simple replacement that stops rattles and keeps assemblies aligned. What it does:

• Holds panels, trim, or components securely to a mounting point
• Prevents parts from shifting, vibrating, or producing noise during use
• Restores proper fit where a worn or broken clip causes looseness
• Works as a direct-fit replacement when the original clip is damaged or lost

• One retaining clip

• Disconnect power and water before starting any repair
• Remove affected panel or trim to access the clip; needle-nose pliers often help with removal/install
• Replace with the same part number to ensure proper fit and function
• Wear eye protection and avoid force that could damage surrounding parts

This lower basket tray replaces the damaged or missing drip pan beneath the dishwasher's lower rack to help contain spills and protect the tub. It restores proper water containment and supports lower-rack stability for everyday cycles. What it does:

• Sits under the lower dishwasher rack to catch drips and small debris
• Helps direct water flow away from components and into the drain area
• Prevents direct contact between dishes and the tub floor where applicable
• Useful when the original tray is cracked, warped, or missing

• One lower basket tray

• Designed for straightforward drop-in replacement; no special tools typically required
• Disconnect power and shut off water to the appliance before working on it
• Inspect surrounding rack supports and clips; replace any damaged hardware for proper fit
• Dispose of the old tray according to local regulations

This door bushing fits on the refrigerator hinge/closer to provide a smooth pivot point and proper door alignment. Replacing a worn bushing reduces squeaks and binding and helps the door close and seal as designed.

• Provides a low-friction bearing surface between the hinge pin/closer cam and the door
• Helps maintain correct door height and alignment to the cabinet
• Promotes smooth door swing and reliable self-closing action
• Typical wear symptoms: squeaking or grinding, binding, door sag, or poor sealing

• Disconnect power and support the door before removing hinge hardware
• Note the order/orientation of hinge parts and any shims; lift off the door carefully
• Install the new bushing on the hinge pin or in the door as shown in your model's diagram
• Reinstall, level, and verify the gasket seals evenly all around