Kbs755obo Parts

This is an automatic refrigerator icemaker assembly that produces, fills and harvests cubed ice so your freezer keeps a steady supply. It replaces a failed ice-making unit to restore normal ice production and cycling. What it does:

• Detects fill level, fills with water, freezes and cycles to eject cubed ice
• Restores ice production when the original icemaker has stopped cycling
• Helps resolve symptoms like no ice production, reduced ice output, or ice stuck in the mold
• Works with the freezer's water supply and electrical harness to automate ice cycles

• One icemaker assembly

• Disconnect power and shut off the refrigerator water supply before starting
• Handle mounting screws and electrical connector carefully; match harness orientation during installation
• Test the water supply and run the initial fill/cycle per manufacturer guidance after installation

This replacement bin control lever secures the refrigerator door shelf bin so it stays in place and removes easily when you need to clean or reorganize. Restores proper bin engagement and reduces rattling or inadvertent drops. What it does:

• Latches and supports the door shelf bin so it stays securely in place
• Allows the bin to release smoothly for removal and cleaning
• Stops bin wobble and rattling caused by a worn or broken lever
• Common symptom: bin falls out, won't engage, or feels loose when closing the door

• One bin control lever

• Disconnect power or unplug the appliance before starting repairs
• Empty the door bin and remove any shelves needed for access
• Remove the old lever, then snap or fasten the replacement into the same mounting points
• If resistance is met, double-check alignment—do not force parts.

This replacement gasket seals a refrigerator utility bin to help keep contents contained and reduce moisture transfer and odors. Restores a tight bin fit for better food storage and helps prevent minor leaks. What it does:

• Seals the perimeter of the utility bin to limit air and moisture exchange
• Helps keep loose items and liquids contained inside the bin
• Reduces frost or condensation buildup caused by a worn seal
• Can improve refrigerator hygiene by limiting odor migration

• Unplug the appliance or disconnect power before servicing
• Remove the bin and clean mating surfaces before installing the new gasket
• Press the gasket evenly into the bin channel; ensure a full, even fit without gaps
• If the gasket is stiff, warm it briefly to ease installation; avoid open flames or overheating

This meat pan front assembly replaces the front panel of the refrigerator meat pan/deli drawer, restoring a proper seal and smooth drawer operation. It helps keep cold air in the drawer and protects stored meats. What it does:

• Replaces a cracked, warped, or missing meat pan front to restore drawer alignment and appearance
• Helps maintain proper cold storage in the deli/meat compartment by sealing the drawer edge
• Reduces rattling or sticking when opening and closing the meat/deli drawer
• Prevents food from contacting damaged trim and makes cleaning easier

• One meat pan front assembly

• High-level swap: remove drawer, detach old front, install replacement, and reinsert drawer
• Handle parts gently to avoid cracking the plastic during installation
• Unplug or disconnect power before working near electrical components as a safety precaution
• If clips or screws are damaged, replace them with OEM fasteners for a secure fit

This light cam assembly positions and secures the interior light mechanism so the appliance light operates correctly when the door is opened. Replaces a worn or broken cam to restore proper light activation and fit. What it does:

• Holds and indexes the interior light/lens assembly so the light turns on/off reliably with door movement
• Prevents the light or lens from rattling or becoming loose inside the cabinet
• Restores proper alignment when a broken or worn cam causes intermittent or non-functioning interior lighting
• Works with the door/light linkage to ensure consistent contact with the light switch

• Disconnect power to the appliance before starting any repair
• Remove the light lens and/or inner trim panel to access the cam; keep all fasteners for reassembly
• Inspect mating parts (lens, switch, brackets) and replace if damaged to avoid repeat failures
• Test light and door operation after installation to confirm correct alignment and function

This damper heater is the heater element used with the refrigerator air-damper assembly to help prevent frost and condensation buildup around the damper. Replaces a failed heater to restore proper damper operation and airflow. What it does:

• Warms the damper area to reduce ice and condensation that can block the damper
• Helps ensure the fresh-food and freezer compartments share airflow as intended
• Commonly replaced when frost or ice accumulates near the damper or when the damper fails to open/close smoothly
• Works as part of the damper/air control system; does not include the full damper housing or actuators unless specified

• Disconnect power to the appliance before replacing this part to avoid shock or injury
• Access may require removing interior panels or the damper housing; follow OEM instructions for your model
• Inspect the damper housing and actuator for damage or ice buildup when replacing the heater

A single replacement screw used to secure appliance panels and components. Restores proper fastening to reduce vibration and keep parts aligned for safe, quiet operation. What it does:

• Fastens panels, brackets or assemblies to the appliance frame
• Helps eliminate rattling or looseness from unsecured parts
• Maintains component alignment for reliable operation
• Matches the OEM fastening point and thread where specified

• Disconnect power and water before beginning work
• Use the correct screwdriver or bit to avoid stripping the head
• Install in the original location and hand-start threads to avoid cross-threading
• Do not overtighten; tighten to snug fit per service literature

This wired refrigerator shelf provides a sturdy, ventilated surface for storing food and beverages while allowing cool air to circulate. It replaces a damaged or missing shelf to restore usable storage space and organization. What it does:

• Supports groceries, containers and deli items while allowing airflow for even cooling
• Replaces bent, rusted or broken shelving that causes unstable storage
• Restores proper spacing so drawers and door clearance operate correctly
• Helps prevent items from sliding by providing a flat, stable surface

• Disconnect power to the appliance before working inside the refrigerator for safety
• Lift out damaged shelf and slide the replacement into the same tracks or supports
• Check that the shelf is level and fully seated on both sides before returning items

This bin control lever secures and releases the refrigerator door shelf/bin so it stays in place during normal use and allows easy removal when needed. It restores proper bin latching for safe storage. What it does:

• Replaces a worn or broken lever that locks the door shelf/bin in position.
• Helps prevent the bin from slipping or falling when opening or closing the door.
• Restores smooth release action so the bin can be removed for cleaning or reconfiguration.
• Useful when the shelf/bin won't lock, is loose, or detaches unexpectedly.

• Disconnect power to the appliance or open door and work carefully to avoid contact with electrical components where applicable.
• Remove the door bin/shelf per your model's service instructions before replacing the lever.
• Inspect mating pins and mounting posts and replace if damaged; do not force parts into position.