Kbs755obo Parts

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring reliable water delivery and ice production. Replaces a failed or leaking valve to stop drips and restore normal operation. What it does:

• Directs incoming water to the dispenser and ice maker when the system calls for water
• Stops water flow when the dispenser or ice maker is idle to prevent leaks or flooding
• Commonly replaces valves that fail to open, causing no water or no ice production
• Also replaces valves that leak or cause low water flow at the dispenser

• Turn off power to the appliance and shut off the water supply before starting work
• Disconnect water lines and electrical connectors carefully; expect residual water in lines
• Inspect supply fittings and hoses for damage; replace if needed to ensure a secure seal
• Test the valve and check for leaks after installation before restoring normal use

This front grille is the lower kick-panel trim that covers and protects the appliance's lower front area while restoring a clean, finished appearance. It replaces damaged, bent, or missing front trim. What it does:

• Covers and protects lower front components from debris and accidental contact
• Restores the appliance's finished appearance after dents, cracks, or paint loss
• Helps maintain proper airflow paths at the appliance base when fitted correctly
• Stops rattling or vibration caused by loose or broken trim

• Disconnect power (and gas, if applicable) before beginning any work
• Typical install requires basic hand tools (screwdriver, nut driver); save any original fasteners and note their locations
• Align grille tabs and secure with factory fasteners; do not force or bend mounting tabs
• Replace with OEM-specified fasteners to ensure proper fit

This bottom skirt grille replaces the lower front trim on compatible refrigerators to restore appearance and help protect internal components. A direct-fit exterior piece that keeps the appliance looking finished while covering the lower access area. What it does:

• Covers and protects the refrigerator's lower front area and components from dirt and accidental contact
• Restores the appliance's finished appearance when the original grille is cracked, broken, or missing
• Helps maintain proper airflow pathways by keeping the access area closed (when installed correctly)
• Prevents small objects from entering the condenser/vent area behind the grille

• Disconnect power to the appliance before beginning any work near electrical components
• Typically installs at the refrigerator's lower front; remove the toe-kick or existing grille per manufacturer instructions
• May require basic hand tools; handle carefully to avoid scratching the finish

Size: 8-18 x 1 1/4 inch.

This replacement ejector is the plastic arm that pushes harvested ice cubes out of the ice mold and into the storage bin, helping restore proper ice ejection and reduce ice that sticks inside the tray. What it does:

• Pushes ice cubes out of the ice mold during the ice maker's harvest cycle.
• Works with the ice maker's motor/gear assembly to advance cubes into the bin.
• Replaces worn, cracked, or broken ejector arms that can leave ice stuck in the mold.
• Can help address symptoms such as cubes that don't eject, partial fills, or frequent ice jams.

• Disconnect power to the refrigerator before servicing to prevent electrical shock.
• Remove the ice bin and follow the OEM ice maker removal steps to access the ejector.
• Handle plastic components carefully to avoid cracking; inspect gears, mounts, and the ice tray for related wear.

This surface burner replaces a damaged or worn cooktop burner to restore even heat for everyday cooking. Designed to match OEM fit and function for compatible gas ranges and cooktops. What it does:

• Provides the primary heat source for stovetop cookware on a single cooking zone
• Replaces burners that are cracked, warped, or have compromised flame patterns
• Helps correct symptoms like uneven heating, weak or irregular flames, or burners that won't sustain ignition
• Restores safe, consistent operation when the original burner is corroded or physically damaged

• Turn off gas supply and power to the appliance before servicing
• Handle with care to avoid damaging mounting tabs or gas/ignition components

This electronic control board manages the appliance's user interface and core cycle functions so your unit responds correctly to selections and timing. It restores control logic and cycle sequencing for reliable operation. What it does:

• Routes user commands from the console to actuators, valves, and motors
• Manages cycle timing, display indicators, and status feedback
• Helps stop unresponsive panels, incorrect cycle behavior, or failure to start when the control has failed
• Can clear intermittent faults caused by a damaged or non-responsive control

• One electronic control board

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board carefully and avoid touching circuit traces or components
• Reinstall with correct mounting and connector engagement; loose connections can cause faults

This ice maker cover protects the ice maker assembly and helps keep ice contained for reliable dispensing and storage. It replaces worn or cracked covers to restore proper ice flow and reduce exposed frost areas. What it does:

• Covers and protects the ice maker and associated components from debris and accidental contact
• Helps guide ice into the dispenser or storage bin for consistent delivery
• Reduces ice exposure that can contribute to frost build-up around the ice maker
• Useful when a cracked or warped cover causes ice to jam or spill

• Disconnect power to the refrigerator before starting any work
• Handle the plastic cover gently to avoid cracking during removal or installation
• Installation typically requires removing the ice maker assembly or front trim; keep track of fasteners

This clip kit secures small panels, wiring harnesses, or trim on compatible Whirlpool appliances to prevent rattling and keep components in their intended position. It restores proper fit and helps reduce noise from loose parts. What it does:

• Holds wiring harnesses and cables in place to prevent chafing or contact with moving parts
• Secures panels, trim, or hoses so assemblies stay aligned and quiet
• Reduces rattling, buzzing, or vibration caused by loose components
• Keeps parts positioned during normal use and transport

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use basic hand tools; avoid forcing clips into place to prevent breakage
• Replace any damaged clips with the exact kit to ensure proper fit
• Re-check that fastened parts are secure and that there are no pinched wires before restoring power

This control transformer provides the correct low-voltage power required by the appliance's control and user-interface circuits, restoring reliable operation to displays, timers, and relays. What it does:

• Steps down line voltage to the appliance's low-voltage control circuit so the control board and display receive stable power
• Enables proper operation of electronic controls, timers, and display backlights
• Common symptom: control panel unresponsive, blank or flickering display, or intermittent control operation
• Replacing a failed transformer can stop control-related resets or unpredictable behavior

• One control transformer

• Disconnect power at the breaker or unplug the appliance before beginning any repair
• Reference the appliance's tech sheet or wiring diagram for exact connector locations and mounting
• Keep all wiring connections tight and match original connector positions and polarity

This rubber grommet provides a tidy, protective seal where hoses, wires, or shafts pass through the appliance cabinet—helping prevent chafing, reduce vibration noise, and maintain proper sealing around openings. What it does:

• Cushions and protects wiring or hoses from rubbing against metal edges
• Helps maintain a seal to reduce water or air bypass where fitted
• Dampens vibration and reduces related noise at the penetration point
• Keeps openings finished and helps prevent further component wear

• Disconnect power (and water for washers) before starting any repair
• Inspect the mounting area for sharp edges or damage; replace if surrounding parts are compromised
• Push the grommet into the opening and seat evenly; do not stretch excessively

This Drier Tube is an OEM part for Whirlpool Refrigerators. It plays a role in filtering and drying the refrigerant. Wear, leaks, or clogs can cause issues with this part.

What Causes a Bad Refrigerator Drier Tube:
Wear, leaks, or clogs within the tube can affect the refrigeration process or cause leaks.

Symptoms of a Bad Refrigerator Drier Tube:

• Insufficient cooling or freezing
• Refrigerant leaks or hissing sounds
• Excessive moisture around the tube area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models. 

This screw secures panels and internal components to restore proper alignment and reduce vibration or rattling from loose or missing fasteners. Replace stripped or lost screws to keep assemblies stable and help maintain normal appliance operation. What it does:

• Fastens trim, panels, and internal parts to prevent movement and vibration
• Helps stop rattling or noise caused by loose or missing fasteners
• Restores proper fit and alignment of assemblies after repair
• Used wherever the appliance design calls for this specific screw to secure parts

• Disconnect power (unplug appliance or switch off circuit) before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head
• Install by hand first, then tighten snugly—do not overtighten to prevent thread or part damage
• Keep track of small fasteners and replace any that are damaged or corroded