Kdfe104hbl0kitchenaid Parts

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Seal is an OEM part for Whirlpool dishwashers. It prevents water leaks from the dishwasher door during wash cycles and water heating drainage. Properly installed seals around the door perimeter maintain water pressure inside the dishwasher tub and ensure leak-free operation. 

Causes of a bad seal can include cracks or breaks after extended use of the door opening and closing, exposure to heat and chemicals from regular dishwasher operation, or loose or improper installation.

Symptoms of a bad seal include:

• Water leaks visible around the edge of the door during wash cycles
• Puddles or drips left on the kitchen counter or floor after use   
• Difficulty closing or latching the dishwasher door securely

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the replacement lid for select top-load washers. It restores a secure, properly aligned cover so the lid closes and the lock/strike can engage, allowing cycles—especially spin—to run safely while helping contain splashes.

• Covers the wash basket and helps contain water splashes during operation
• Provides proper alignment for the lid lock/strike to engage
• Replaces cracked, warped, or broken lids
• May help with: lid won't close/latch and cycles that won't start or won't spin because the lid isn't closing

• Unplug the washer before servicing
• Support the lid and remove hinge screws/pins carefully to prevent damage
• Transfer existing hinge hardware and the lid strike from the old lid if your model uses them
• After installation, close the lid to verify smooth closure and lock engagement before running a cycle

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

This wire harness is a direct-replacement assembly that routes power and control signals between the appliance's electrical components, restoring proper electrical connections and component communication. What it does:

• Carries power and control signals between the control and functional components (motors, switches, sensors)
• Restores interrupted electrical connections that can cause components to not start or run intermittently
• Stops intermittent operation or failures caused by frayed, damaged, or corroded wiring
• Helps resolve related error codes or loss of specific functions when wiring is the confirmed cause

• Disconnect power to the appliance before performing any repair to avoid shock or damage
• Match connector shapes and wire routing to the original harness; do not force connectors
• Secure wires away from moving parts and heat sources; use retained clips/fasteners

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This control panel is the main console assembly that lets you select cycles and operate the appliance. It restores proper control input and visible status so the appliance responds correctly to button presses and cycle selections. What it does:

• Provides user interface buttons and display/indicator functions for selecting cycles and options
• Sends control signals to the appliance's main control so selected operations start and run
• Replaces worn, cracked, or unresponsive button panels that fail to register commands
• Helps address symptoms like unresponsive or sticking buttons, blank or unreadable indicators, or incorrect option selection

• One control panel

• Disconnect power (unplug or switch off breaker) before beginning work
• Remove outer console or housing per service instructions; retain all original fasteners
• Handle delicate display/overlay areas carefully to avoid scratching; avoid flexing circuit connections
• Test function after reconnection before fully reassembling the appliance

This control panel is the appliance's main user interface, housing the touchpads, buttons and display so you can select cycles and settings. Replacing a faulty panel restores normal control and readable status feedback. What it does:

• Provides buttons/touchpads and display to start, stop and set functions
• Communicates user commands to the appliance's control electronics
• Commonly replaces panels that have unresponsive buttons or blank/flickering displays
• Helps resolve control-related errors or intermittent operation tied to damaged front controls

• Disconnect power at the breaker before removing or installing the panel
• Handle with care to avoid scratching or damaging the display and button surfaces
• Installation typically requires removing trim and fasteners; keep screws and clips organized

This replacement control panel restores the oven's front console so you can operate settings and view the display. It provides the user-interface surface and protective cover for the range's electronic controls. What it does:

• Houses the touch pads/buttons and display area so you can select bake, broil, timers, and settings
• Protects underlying electronic components from spills, grease, and everyday wear
• Replaces damaged, cracked, or cosmetic panels that interfere with button use or readability
• Can resolve issues where buttons stick, feel loose, or the faceplate is visibly broken

• One control panel (console) as shown

• Always disconnect power at the breaker before starting any service
• Handle glass or painted surfaces carefully to avoid scratches; wear gloves if needed
• Installation typically requires removing the oven door or inner trim and unfastening mounting screws—refer to the service manual

The Pocket Control Panel is an OEM replacement part for Whirlpool dishwashers. It is responsible for housing the control buttons and display panel of your dishwasher, allowing you to navigate and select the desired settings for washing.

A bad control panel console can occur due to wear and tear, electrical malfunctions, or physical damage. If you notice symptoms such as unresponsive buttons, a malfunctioning display, or error codes on the console, it may be time to replace it.

Symptoms of a bad control panel console include:

• Unresponsive buttons or a non-functional display
• Flickering or dim indicators
• Error codes displayed on the console

Repair your dishwasher by replacing the faulty or damaged control panel console with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement control panel restores the appliance's front console appearance and secures the control assembly. It provides a finished surface and protects the underlying switches and electronics from damage and wear. What it does:

• Replaces cracked, dented, or faded console trim for a clean, factory look
• Secures and protects control switches, buttons, and display areas
• Helps stop drafts and debris from entering the control cavity
• Addresses symptoms like visible damage, loose or warped trim, or exposed controls

• Disconnect power to the appliance before starting any repair
• Remove knobs, bezels, or mounting screws as needed; handle panel edges carefully to avoid scratching
• Align tabs and fasteners before seating the panel; do not force into place