Kdfe2d4kps1 Parts

This jumper is an OEM-style electrical wire connector used to bridge terminals in a Whirlpool appliance to restore circuit continuity and proper component operation. It's a simple replacement part that helps return power or signal paths when the original jumper is damaged. What it does

• Provides a secure electrical connection between two terminals to complete a circuit.
• Restores power or signal routing to components that lose function due to a broken or corroded jumper.
• Common symptom: component or control doesn't receive power or the appliance won't complete a specific cycle.
• Works with control boards and wiring harness assemblies where a factory jumper is used.

• One jumper electrical connector.

• Disconnect power (unplug appliance or shut off breaker) before service to avoid shock or damage.
• Use insulated tools as needed and make secure, tight terminal connections to prevent arcing.

Fix a dishwasher that won't start, stops mid-cycle, or has no display with this electronic control board. Requires removing door panel for installation.

This pump and motor is the dishwasher circulation pump assembly that moves wash water through the spray arms for normal cleaning. Replacing a worn assembly restores proper water circulation and helps maintain wash performance. What it does:

• Circulates water through the spray arms during the wash cycle to clean dishes
• Prevents weak spray or poor cleaning when the pump fails or loses prime
• Can trigger wash-cycle faults or poor rinse performance when flow is reduced

• One pump and motor assembly as shown

• Disconnect power and turn off the water supply before starting any repair
• Remove the dishwasher access panel and support the tub before removing the old assembly
• Expect some residual water in the sump — have towels and a pan ready
• Inspect and replace any damaged gaskets or seals during reassembly; torque and wiring should match OEM specifications

This 2-hole disc diverter redirects water flow inside the washer's dispenser/tub assembly so detergent and rinse water route correctly. It helps restore proper dispensing and prevents water from spraying or leaking in the wrong area. What it does:

• Directs incoming water to the correct dispenser or tub channels during fill and rinse cycles
• Helps ensure detergent and fabric softener are delivered at the right time
• Can stop errant water spray or leaks caused by a worn or damaged diverter
• Restores normal water routing when the washer's dispense functions fail or behave inconsistently

• One 2-hole disc diverter

• Disconnect power and turn off the water supply before starting work
• Replace only with the exact OEM part number shown for your model
• Installation may require removing the dispenser assembly or portions of the top/tub cover; your model's service diagram
• Inspect adjoining seals and gaskets during replacement and replace if damaged

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

The Dishwasher Hose is an OEM part for Whirlpool dishwashers. It is responsible for connecting the dishwasher to the water supply and drain system, ensuring proper water flow and drainage during the cleaning cycle.

A bad dishwasher hose can be caused by regular use, wear and tear, or damage from external factors. If you notice issues such as leaks, blockages, or a loose connection, it may indicate a problem with the hose.

Symptoms of a bad dishwasher hose include:

• Water leaks around the dishwasher or under the sink
• Poor water draining or standing water in the dishwasher
• Insufficient water supply

Replace your faulty dishwasher hose with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Insulation pad reduces heat transfer and dampens vibration in your dishwasher. Replace if damaged, deteriorated, or missing to protect components. Verify fit with your model number.

Replacement fastening nut for dishwasher components and mounting hardware. Secures threaded shafts, studs, or bolts. Needed when original is stripped, missing, or corroded.

This is a handle attached to the upper dish rack in a dishwasher, used to slide the rack in and out of the tub. It provides a grip point for loading and unloading dishes from the upper rack. Replace this part if the handle is cracked, broken, or has detached from the rack, making it difficult to maneuver the upper dishrack.

The Cover Box is an OEM part for Whirlpool dishwashers. It is the outer casing that surrounds and protects the internal components of the dishwasher. Made of durable material, the cover box acts as a protective barrier that shields electronics and mechanisms from exterior damage. 

Symptoms of a bad cover box include:

• Cracks, holes, or other damage exposing internal parts
• Warping or bending of the cover 
• Difficulty closing or aligning the dishwasher door
• Increased noise levels emitting from the unit

Causes can be normal wear over time, exposure to moisture, or physical impacts. This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore models. Replace yours today to maintain protective barrier integrity and appliance appearance.
 

Protective corner cover that installs at the base of the dishwasher tub wall. Replace if cracked, chipped, or damaged from repeated door contact.

Structural bracket that secures internal dishwasher components and maintains proper alignment. Replace if cracked, broken, or missing to restore fit.

This small plastic clip attaches to the dishwasher rack tines to hold lightweight or small items in place during the wash cycle, preventing them from flipping over and collecting dirty water. It is especially useful for securing items like plastic lids, baby bottle caps, and other small pieces that tend to move around. Replace this clip if it has become cracked, broken, or no longer grips the rack tines securely.

Drain hose for dishwashers that removes wastewater after each cycle. Replace if cracked, leaking, or clogged with mineral deposits over time.

Fix control panel failures and power issues with this dishwasher wire harness. Restores electrical connections between the control board and components.

Secures hoses to fittings and prevents leaks in your dishwasher. Replace when connections loosen or water escapes. Confirm fit with your model number.