Kdpr234gbs0 Parts

The Inlet Tube Nut is an OEM part for Whirlpool dishwashers. It is responsible for securely connecting the water inlet tube to the dishwasher's water valve, ensuring a proper water supply for the appliance.

A bad inlet tube nut can be caused by wear and tear, overtightening or cross-threading during installation, or damage due to accidental mishandling. If you notice water leakage or a loose connection at the water inlet tube, it may indicate a problem with the inlet tube nut.

Symptoms of a bad inlet tube nut include:

• Water leaks or dripping  
• Inconsistent water supply to the dishwasher
• Difficulty in securing or tightening the water inlet tube

Replace your faulty inlet tube nut with this genuine OEM part to restore your dishwasher.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Right Side

The Third Level Rack Support is an OEM part for Whirlpool dishwashers. It provides secure placement and stability for an additional third rack, allowing for maximum utilization of space within the dishwasher tub.

Causes may be normal wear and fatigue of the metal over repeated cycles. The extended use and heavy loads can put stress on these supports.

Symptoms of a faulty support include:

• Noisy rattling coming from the top of the dishwasher
• Inability to safely place items on the third rack
• Visible bending of the brackets out of position

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

The Tine Clip is an OEM part specifically designed for Whirlpool brand dishwashers. This small but important piece secures individual tines to the upper dish rack for stability during washing.

Repeated use causes plastic clips to become brittle or dislodge over time from heavy loads. This jeopardizes proper rack assembly and performance. 

Causes of a bad tine clip could be normal wear and tear, damaged pads from sharp dishes, or improper loading of heavily soiled cookware.

Symptoms of a failing tine clip include:

• Loosened or detaching dishrack tines that shift positions 
• Gaps allowing collected food and particles to fall through
• Reduced support for delicate or small dishes in affected areas

This OEM Whirlpool replacement restores the rack's fully functional design. Compatible with Maytag, KitchenAid, Jenn-Air, and other models, it improves washing coverage and optimizes usable space.
 

The High Limit Thermostat is an OEM component specifically designed for Whirlpool dishwashers. It monitors temperature fluctuations during wash cycles. 

Causes of a faulty thermostat include mineral coatings or other deposits impeding function over extended periods. Wiring connections may weaken through vibrations.

Symptoms of a bad high limit thermostat include:

• The dishwasher failing to heat properly or heating excessively  
• Unexpected termination of cycles without explanation
• A burnt odor or steam emitting from the dishwasher 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models as well.

The Tub Corner Cover is an OEM component specifically designed for Whirlpool dishwashers. It provides protective cladding at the base of the tub wall corners.

Causes of a faulty corner cover can include cracks or chips developing from years of door contact during loading and unloading. Over time, plastic materials may become brittle.

Symptoms of a bad tub corner cover include:

• Exposed undercoating vulnerable to moisture damage   
• Loss of clean aesthetic finish inside tub interior  
• Risk of injury from sharp or jagged edges without the cover

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This pivot tine replaces a broken or missing dishwasher rack tine and restores secure, adjustable dish support. It snaps into the rack to let tines fold or stay upright so plates and bowls sit correctly during cycles. What it does:

• Replaces a damaged or missing rack tine so dishes stay upright and stable
• Allows the tine to pivot between folded and upright positions for flexible loading
• Prevents dishes from shifting or contacting spray arms during a wash
• Restores original rack functionality and loading capacity

• One replacement pivot tine

• High-level replacement; remove the rack or move to a comfortable work area for access
• Inspect the rack clip/slot for damage before installing; ensure the tine seats fully and pivots freely
• Use gloves to protect your hands from sharp edges and keep small parts away from children

This tube cap assembly replaces a damaged or missing plastic cap on a dishwasher rack tube to restore secure rack support and smooth sliding. It helps keep the rack aligned and prevents rattling or snagging during cycles. What it does:

• Covers the open end of a rack tube to protect dishes and prevent items from catching
• Keeps the rack roller/socket area sealed and stable for steadier movement
• Prevents water/soil buildup inside the tube end that can cause corrosion or odors
• Reduces rattling or misalignment caused by a cracked or missing cap

• Disconnect power to the dishwasher before starting any repairs; pull the lower rack out for access
• Remove the old cap by pulling it off the tube; press the replacement onto the tube until it seats firmly
• Check rack movement and alignment after installing; reassemble rack components and restore power
• If the tube or surrounding hardware is damaged, replace those parts as needed rather than forcing the cap

This retainer is a small mounting clip that secures internal components and trim so assemblies stay in place during normal use. Replacing a worn or broken retainer restores proper fit and helps stop rattles and loose parts. What it does:

• Holds panels, trim, or small assemblies in their mounting position
• Prevents clips or parts from falling out or shifting during operation
• Common symptom: loose trim, rattling, or parts that won't stay seated
• Simple, low-profile part used where a secure hold is required

• Disconnect power (or unplug) before inspecting or replacing parts
• Access may require removing covers or trim—keep fasteners handy
• Replace only with the exact retainer to ensure proper fit and retention

This support mounting bracket secures and aligns internal components to keep assemblies stable and operating smoothly. It helps prevent part movement that can cause noise, misalignment, or improper panel fit. What it does:

• Stabilizes and supports adjacent components or panels to reduce vibration and rattling
• Keeps doors or internal assemblies aligned for correct operation
• Prevents shifting that can lead to intermittent contact or wear
• Helps maintain proper spacing where a fixed mount is required

• Disconnect power or unplug the appliance before beginning work
• Handle sharp edges carefully and use the proper screwdriver or nut driver
• Reuse existing fasteners only if they are in good condition; replace stripped or damaged hardware

This is a replacement fastening nut used to secure appliance components and mounting hardware. It restores a solid connection so panels, brackets, or assemblies stay properly attached and function safely. What it does:

• Secures threaded shafts, studs, or bolts to hold parts in place
• Prevents loosening that can cause rattling, misalignment, or detached panels
• Restores proper mounting for brackets, trim pieces, and small assemblies
• Works wherever the correct threaded nut is required for a secure fit

• Turn off power to the appliance and unplug before servicing
• Hand-start threads to avoid cross-threading, then tighten with appropriate hand tool

This retainer is a small mounting clip that secures internal components and helps keep moving parts aligned for reliable appliance operation. It prevents unwanted shifting and reduces noise caused by loose parts. What it does:

• Holds panels, assemblies or wiring in place to prevent rubbing or chafing
• Keeps components aligned to maintain normal operation and reduce vibration
• Can stop intermittent noises caused by loose or displaced parts
• Helps maintain safe spacing between moving elements and nearby surfaces

• Disconnect power to the appliance before starting any repair
• Remove any access panels or panels as needed to reach the mounting location
• Replace the retainer by snapping or fastening it into the original mounting point; retainers are typically orientation-specific
• If fasteners are present, keep them tight but do not overtighten plastic parts to avoid cracking

The Wire Harness is an OEM component specifically designed for Whirlpool built-in dishwashers. Located inside the dishwasher cavity walls, it connects individual module components to the central control board. 

Causes normally stem from regular operational stresses concentrated where wires bend. Over time, natural wire fatigue or sheath cracks emerge, compromising circuits.  

Symptoms of a bad wire harness include:  

• Lights or functions unexpectedly quit working
• Error codes indicate wire shorts 
• The control panel shows unreliable responses
• Troubleshooting finds pinched or damaged wires

Compatible also with some GE and KitchenAid built-in models, this part ensures consistent washing performance

This support is a small structural bracket that helps secure internal components and keeps the appliance aligned for reliable operation. It restores proper fit and reduces movement where a worn or broken support allows shifting. What it does

• Holds internal panels or assemblies in the correct position to prevent rubbing and noise
• Restores alignment to doors, drawers, or mounted components that sag or sit unevenly
• Reduces vibration and rattling caused by loose or missing support
• Prevents further wear on fasteners and nearby parts by keeping components stable

• One support bracket

• Disconnect power (and water, if applicable) before starting any repair
• Use basic hand tools; some trims or panels may need removal for access
• Keep track of fasteners and bracket orientation before tightening