Kdpr234gbs0 Parts

The Pump and Motor is an OEM replacement part for Whirlpool dishwashers. It is responsible for the circulation and drainage of water during the dishwashing cycle. It provides a powerful and reliable water flow, allowing for effective spraying of water and removal of food from your dishes.

A bad pump and motor assembly can occur due to various reasons, such as wear and tear, clogging or blockage in the pump or motor, or electrical malfunctions. If you notice symptoms such as poor cleaning results, noisy operation, or water not draining properly from the dishwasher, it may be time to replace the pump and motor assembly.

Symptoms of a bad dishwasher pump and motor assembly include:

• Poor cleaning results
• Noisy operation
• Water not draining properly

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Dishwasher Drip Tray is an OEM part for Whirlpool dishwashers. It collects excess water and rinse aid during the wash and rinse cycles, protecting internal components from exposure to liquids. As a critical part, the drip tray supports smooth drainage and prevents puddling inside the dishwasher.

Symptoms of a bad drip tray can include:

• Puddling or pooling of water inside the dishwasher tub
• Leaks onto the floor over time from the drainage area
• Water marks or corrosion of internal surfaces
• Improper drainage of water after cycles 

Causes of a bad drip tray may be cracks, leaks, or damage to the drainage channels over time. Failure could also result from mineral buildup blocking proper drainage.

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, some KitchenAid, and select Kenmore dishwasher models. 

Replacement screw used to secure appliance panels and components. Small but essential, it restores proper fit and helps prevent rattling, misalignment, or parts coming loose after repair or service. What it does:

• Secures panels, trim, brackets and small appliance components to restore correct alignment and fit.
• Replaces missing, stripped or damaged fasteners that allow parts to shift or vibrate.
• Helps stop rattling or loose parts that can occur during operation.
• Works as a direct hardware replacement where this exact screw is specified.

• Disconnect power (and gas if applicable) before servicing the appliance.
• Use the correct size screwdriver or driver bit to avoid cam-out or stripped heads.
• Install with firm, even pressure—do not over-tighten to avoid stripping threads or cracking plastic parts.
• Replace with the exact OEM screw when specified to ensure correct fit and function.

The Mounting Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This mounting clip acts to securely attach and hold the dishwasher in place under the kitchen counter. 

Symptoms of a bad mounting clip can include:

• Looseness, movement, or shaking of the dishwasher during operation
• Visible damage, bending, or broken tabs on the mounting clip itself
• Detachment or separation of the dishwasher from the cabinetry

Causes of a bad mounting clip usually stem from normal wear and tear over extended use. Repeated shocks or impacts could also damage the mounting clip over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models. 

Replacement clip adjuster arm for the appliance adjuster mechanism. Secures and positions the adjuster assembly to restore proper alignment and help reduce rubbing, misalignment, and excessive noise caused by a broken or worn clip. What it does:

• Secures and holds the adjuster assembly in the correct position.
• Restores proper alignment to moving assemblies to prevent rubbing or binding.
• Can reduce unusual noises or vibration caused by a loose or broken clip.
• Commonly replaced when the clip is cracked, bent, missing, or no longer holds.

• Disconnect power (and gas if applicable) before beginning any repair.
• Basic hand tools may be required; panel or component removal could be necessary to access the clip.
• Handle sharp edges and inspect adjacent fasteners or mating clips; replace any damaged hardware.

The Silverware Basket is an OEM component specifically designed for Whirlpool dishwashers. Located at the bottom of the dishwasher, the silverware basket provides an isolated space for washing smaller silverware and utensils. 

The silverware basket is constructed of durable plastic coated with a non-slip material on the bottom. It features folded edges and reinforced sides to securely hold silverware in place during the washing cycle. Partitions and prongs within the basket help separate pieces and prevent tangling.

Symptoms of a bad silverware basket include:

• Silverware escaping from the basket during the wash cycle 
• Damage, cracks, or loose pieces on the basket
• Missing partitions or prongs

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This diffuser directs and evens airflow inside the appliance for more consistent performance and reduced noise from uneven air movement. It replaces a worn or damaged diffuser to help restore proper air distribution. What it does

• Guides internal airflow to ensure even circulation and stable operation
• Helps reduce unusual air-noise caused by cracked or loose diffuser vanes
• Can improve drying and cycle consistency when the original diffuser is damaged
• Works with the unit's existing blower and ducting to maintain designed airflow paths

• One replacement diffuser

• Disconnect power before beginning any repair to avoid shock or injury
• Access may require removing panels or the drum; follow OEM disassembly steps
• Inspect surrounding seals and mounting tabs; replace if damaged to ensure proper fit

This OEM-style adjuster restores proper cabinet height and alignment so doors and drawers close correctly and the appliance sits level for stable, low-vibration operation. Ideal when worn or damaged adjusters cause misalignment. What it does:

• Replaces the appliance's leveling/mounting adjuster to restore correct cabinet height
• Helps doors and drawers align and seal properly
• Reduces cabinet rocking and excessive vibration
• Can correct uneven operation caused by a worn or stripped adjuster

• Disconnect power to the appliance before starting any repair
• Support the cabinet or appliance weight before removing/installing the adjuster
• Use appropriate hand tools (wrench/pliers) and make small adjustments, checking level and alignment frequently
• If fasteners are damaged or the mounting area is compromised, replace or repair mounting hardware before reinstalling

This replacement clip secures small appliance components to keep wiring, tubing, or trim held in place and reduce rattling or shifting. It's a simple, low-cost part that restores proper fit and prevents wear caused by loose parts. What it does:

• Holds wiring, hoses, or trim panels in position to prevent movement
• Helps stop rattling or vibration noises caused by loose components
• Keeps routed lines away from heat or moving parts to reduce wear
• Restores secure fit where a damaged or missing clip allowed shifting

• Disconnect power to the appliance before beginning any repair.
• Use pliers or a flat tool as needed to remove the old clip; watch for sharp edges.
• Press the clip into place until it snaps or seats securely; the secured part does not move.
• If routing wiring or hoses, avoid pinching; check operation after reassembly.

This replacement screw secures appliance panels, brackets, and internal components so they stay tight and rattle-free. Use it to replace missing, stripped, or corroded hardware and restore a safe, secure assembly.

• Fastens panels, brackets, covers, or assemblies to the appliance cabinet/frame
• Helps prevent vibration, rattling, and loosening during operation
• Replaces hardware that is missing, worn, rusted, or stripped
• Common signs you need this screw: loose or misaligned parts, rattling noises, or a cover that won't stay on

• Disconnect power; shut off water or gas if applicable before servicing
• Match length and thread to the original and replace like-for-like locations
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly without overtightening to prevent stripping plastic or sheet metal

The Dishwasher Harness Wire is an OEM component specifically designed for Whirlpool dishwashers. This wire is responsible for connecting and carrying signals between electronic components, providing a pathway for power and communication within the dishwasher. 

Causes of a bad dishwasher harness wire can include cuts, shorts, or damage to the wiring over time. Repeated folding, bending, or crimping of the wire during installation or repairs can cause wire fatigue leading to failure. Water getting into the connections can corrode wiring.

Symptoms of a bad dishwasher harness wire include:

• Disruption of control panel and functions 
• Failure to sense cycles or inputs
• Repeated error codes
• Intermittent or lack of power to components

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This 9/32" ratcheting retainer secures mating components in place, providing a reliable spring-lock connection that resists loosening from vibration. Use it to restore proper fit where the original retainer has worn or broken. What it does:

• Holds shafts, rods, or assemblies securely in position using a ratcheting/spring clip action
• Prevents side-to-side movement and reduces rattling or misalignment
• Commonly replaced when the original clip is bent, cracked, or no longer grips tightly
• Works as a direct-fit replacement to restore intended component retention

• Basic hand tools may be required; handle the clip carefully to avoid pinching
• Wear eye protection—spring clips can release suddenly during removal/installation
• Ensure mating parts are aligned before seating the retainer for a secure fit
• If other fasteners or damaged parts are found, inspect and replace as needed

This tine row replaces a broken or missing set of tines on a dishwasher lower rack to help keep plates, bowls and cookware upright and secure during wash cycles. It restores proper dish spacing and prevents items from shifting. What it does

• Replaces a damaged or corroded tine row to hold dishes securely in the lower rack
• Helps prevent dishes from tipping, colliding, or blocking spray arms
• Restores consistent spacing so water and detergent can reach items evenly
• Commonly used when individual tines are bent, missing, or the wire coating has worn away

• One tine row (single replacement piece as shown)

• Removes and snaps into the lower rack; may require gently bending adjacent tines to align
• No electrical work required; remove the rack and work on a stable surface
• Use hand protection when handling sharp wire ends or cut coating
• If rack coating is extensively damaged, consider replacing the rack to prevent rust transfer

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness