Kdpr234gbs0 Parts

The Dishwasher Harness Wire is an OEM component specifically designed for Whirlpool dishwashers. This wire is responsible for connecting and carrying signals between electronic components, providing a pathway for power and communication within the dishwasher. 

Causes of a bad dishwasher harness wire can include cuts, shorts, or damage to the wiring over time. Repeated folding, bending, or crimping of the wire during installation or repairs can cause wire fatigue leading to failure. Water getting into the connections can corrode wiring.

Symptoms of a bad dishwasher harness wire include:

• Disruption of control panel and functions 
• Failure to sense cycles or inputs
• Repeated error codes
• Intermittent or lack of power to components

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This 9/32" ratcheting retainer secures mating components in place, providing a reliable spring-lock connection that resists loosening from vibration. Use it to restore proper fit where the original retainer has worn or broken. What it does:

• Holds shafts, rods, or assemblies securely in position using a ratcheting/spring clip action
• Prevents side-to-side movement and reduces rattling or misalignment
• Commonly replaced when the original clip is bent, cracked, or no longer grips tightly
• Works as a direct-fit replacement to restore intended component retention

• Basic hand tools may be required; handle the clip carefully to avoid pinching
• Wear eye protection—spring clips can release suddenly during removal/installation
• Ensure mating parts are aligned before seating the retainer for a secure fit
• If other fasteners or damaged parts are found, inspect and replace as needed

This tine row replaces a broken or missing set of tines on a dishwasher lower rack to help keep plates, bowls and cookware upright and secure during wash cycles. It restores proper dish spacing and prevents items from shifting. What it does

• Replaces a damaged or corroded tine row to hold dishes securely in the lower rack
• Helps prevent dishes from tipping, colliding, or blocking spray arms
• Restores consistent spacing so water and detergent can reach items evenly
• Commonly used when individual tines are bent, missing, or the wire coating has worn away

• One tine row (single replacement piece as shown)

• Removes and snaps into the lower rack; may require gently bending adjacent tines to align
• No electrical work required; remove the rack and work on a stable surface
• Use hand protection when handling sharp wire ends or cut coating
• If rack coating is extensively damaged, consider replacing the rack to prevent rust transfer

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This wire harness routes power and control signals between the appliance control and internal components to restore reliable electrical connections and proper operation. Designed as a direct-replacement harness for the original wiring assembly. What it does:

• Carries power and signal connections between the control board and components (motors, valves, heaters, lights).
• Replaces damaged or frayed wiring that can cause intermittent or no power to components.
• Helps resolve symptoms like unresponsive controls, components that won't run, or intermittent operation.
• Maintains correct connector fit and wire routing to prevent shorts or pinched conductors.

• Always unplug the appliance or shut off power at the breaker before starting work.
• Handle connectors by the housing; avoid pulling on wires and protect against pinching.
• Confirm connector orientation and full seating during reassembly; follow routing clips and harness clips.

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This support is a small mounting bracket that secures internal components and helps keep assemblies aligned so your appliance runs quietly and reliably. It replaces worn or broken supports to restore proper fit and stability. What it does:

• Secures internal parts or panels to prevent movement and misalignment
• Reduces vibration and rattling caused by loose or damaged supports
• Helps maintain correct alignment of assemblies for reliable operation
• Prevents further wear on adjacent parts by holding components in place

• Disconnect power (and water if applicable) before starting any repair
• Use common hand tools;
• Handle edges carefully—some components and mounting points may be sharp
• W10647236 matches the part on your appliance before installing

This pump cover replaces the damaged housing that seals and protects the washer's drain pump, helping restore proper water flow and contain leaks. It's a direct-fit service part designed for use with the original pump assembly. What it does:

• Forms the sealed housing around the drain pump and impeller to prevent water leaks.
• Helps direct drained water from the tub into the pump for proper drainage.
• Can resolve symptoms such as leaks under the washer, poor draining, or grinding/noise when the pump area is compromised.
• Replaces cracked or worn pump housings that allow water to escape or reduce pump efficiency.

• Disconnect power and water supply before servicing the washer to avoid shock or flooding.
• Basic hand tools required; some models may require removal of the front or rear access panel to reach the pump.
• Inspect surrounding seals, hoses, and clamps while replacing the cover; replace any damaged components to prevent repeat leaks.

This replacement silverware basket holds forks, knives and spoons securely during dishwasher cycles so utensils come out separated for better cleaning and easier unloading. Durable plastic construction designed for direct fit replacements. What it does:

• Keeps silverware organized and upright for improved water flow and cleaning
• Prevents small items from falling to the bottom of the tub or blocking spray arms
• Helps protect utensils from contact with larger dishes and racks
• Restores a missing, cracked or damaged utensil basket so loading is safer and neater

• One silverware basket

• Fits into the lower rack; simply drop into place and ensure it sits level
• Remove power or run an empty rinse cycle before working in the dishwasher for safety
• Inspect rack wheels and clips for damage before reinstalling; do not force into a warped rack
• Avoid overfilling to prevent bending or cracking

This replacement refrigerator door gasket creates a tight seal around the fresh-food compartment door to help keep cold air in and warm, humid air out, improving cooling performance and reducing frost buildup. What it does

• Forms an airtight seal around the fresh-food door to help maintain interior temperature
• Helps prevent warm air and moisture from entering, reducing frost and condensation
• Can reduce compressor runtime caused by a leaking door seal
• Common symptom: visible gaps, tears, or warped edges around the door; uneven cooling or frost along the door perimeter

• One refrigerator door gasket

• Inspect and clean the door flange before installing to ensure a proper seal
• Start installation at the corners and work around the perimeter, pressing the gasket into the channel to seat it evenly
• Warm the gasket slightly if needed to make it more flexible for fit; avoid overheating
• Disconnect power only if required by your refrigerator model and follow all safety precautions

This manifold housing is a direct-fit replacement part that routes fluids and connects appliance plumbing or airflow to associated components, restoring reliable flow paths and secure connections. What it does:

• Serves as the central connection point to direct fluid or air between internal components
• Re-establishes sealed pathways to prevent leaks or loss of pressure
• Provides mounting and alignment for related hoses and fittings
• Helps resolve symptoms such as leaks at the connection area, loss of flow, or poor component performance

• One manifold housing assembly

• Disconnect power and water/gas supply before beginning service; follow appliance-specific safety procedures
• Inspect and replace any damaged hoses, clamps, or seals when installing the manifold
• Use correct OEM fasteners and torque where specified; avoid overtightening plastic fittings

The Manifold is an OEM part for Whirlpool dishwashers. It distributes water evenly throughout the dishwasher during the wash cycle for thorough cleaning of your dishes. It directs the flow of water to the spray arms, allowing for efficient and effective cleaning.

A bad manifold/water guide can occur due to clogs, leaks, or damage caused by hard water or debris buildup. If you notice symptoms such as poor cleaning results, reduced water pressure, or water leaking from the dishwasher, it may be time to replace the manifold/water guide.

Symptoms of a bad manifold/water guide include:

• Poor cleaning performance
• Reduced water pressure
• Water leaks from the dishwasher

Restore the cleaning performance of your Whirlpool dishwasher by replacing the faulty or damaged manifold/water guide with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This retainer is a small mounting clip designed to secure compatible appliance components in place, helping prevent movement and noise while the appliance runs. It restores proper fit where the original retainer is broken or missing. What it does:

• Secures brackets, panels, or harnesses to keep components from shifting during operation
• Helps eliminate rattling, vibration, or loose-fit symptoms caused by a damaged retainer
• Provides a reliable mounting point for the associated part to function as intended
• Matches the OEM shape and fit so replacement is straightforward when the original fails

• One retainer/mounting clip

• Disconnect power (unplug or switch off circuit breaker) before starting any repair
• Installation typically requires basic hand tools; remove any panels needed to access the mounting location
• Handle surrounding parts carefully to avoid damage to wires or trim

This drum roller wheel replaces a worn support wheel that helps the dryer drum rotate smoothly and quietly. Restoring a damaged roller helps reduce noise and prevents uneven drum movement. What it does

• Supports the dryer drum so it turns freely during operation
• Reduces scraping, squeaking or thumping noises from a worn wheel
• Helps prevent uneven drum wear and fabric catching
• Works with associated axle or mounting bracket to keep the drum aligned

• One replacement drum roller wheel

• Disconnect power to the appliance before starting any repair
• Inspect the drum axle and mounting bracket; replace any worn hardware along with the wheel
• Basic hand tools are typically sufficient; larger disassembly may be required for access