Kdte204kps Parts

The Upper Rack Tub Mount Roller is an OEM part compatible with Whirlpool dishwashers. It is located in the upper rack and plays an important role in providing a smooth movement of dishes across the rack. The roller enables seamless movement of dishes in and out during loading and unloading. 

Causes of a bad roller can include wear and tear from repeated use, damage from overloading or unbalanced loads, or debris buildup that prevents proper rolling.  

Symptoms of a bad Upper Rack Tub Mount Roller include:

• Dishes getting stuck or stuck in the upper rack
• Difficulty sliding dishes in and out of the upper rack  
• Noisy or grinding sounds coming from the upper rack area
• Upper rack that does not move smoothly

 This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Dishrack Track Mount is an OEM part for Whirlpool dishwashers. It secures the dishracks in place to allow proper loading and unloading of dishes during washing cycles.

Symptoms of a bad track mount include:

• Dishracks not sliding smoothly or getting stuck/binding
• Excessive noise or rattling coming from the dishracks  
• Visible damage or cracks in the mount
• Dishracks falling out of place during washing

Causes of failure can be prolonged usage stressing the plastic material over time, exposure to hot conditions weakening its integrity, or impact rupturing components. 

It is compatible with select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper models.

This stud is a small mounting fastener that provides a secure anchor point for attaching appliance components. Replacing a worn or missing stud restores a tight, aligned fit and helps prevent looseness, rattles, or shifting.

• Provides a fixed, threaded anchor for mounting a handle, bracket, or panel
• Helps keep parts aligned and secure during normal operation
• Common replacement for studs that are stripped, bent, broken, or missing
• Symptoms can include a loose or wobbly component, difficulty tightening, or visible damage/corrosion

• Disconnect power and, if applicable, shut off water or gas before servicing
• Wear cut-resistant gloves and handle panels carefully
• Hand-start threads to avoid cross-threading; tighten snugly without over-torquing
• Reinstall any covers or related hardware in their original positions

This is the front retaining rail for the 2nd and 3rd level door bins on select refrigerators. It restores a secure barrier so items stay put and refreshes the clean, finished look of your door storage. What it does:

• Secures items on the 2nd and 3rd level door bins to help prevent tipping or spills
• Replaces a cracked, warped, discolored, or missing rail
• Helps the bin seat properly on the door when the original rail is damaged
• Typical symptoms include broken front trim, items falling from the bin, or difficulty reinstalling the bin

• One door bin rail

• Disconnect power before servicing for safety
• Remove the bin from the door and release the old rail from its locking tabs
• Align the new rail and snap it onto the bin; verify correct orientation for the 2nd/3rd level bin
• Reinstall the bin, ensuring it is fully seated in the door supports

This dishwasher rack wheel replaces a worn or broken wheel so the rack glides smoothly on its track. Restore easy in-and-out movement and proper alignment to help prevent tilting or derailment during loading and unloading.

• Guides and supports the rack as it rolls along the rail
• Maintains proper rack alignment and spacing during use
• Replaces cracked, worn, or missing wheel components
• Symptoms include sticking or uneven rack movement, derailment, or scraping/clicking noises

• Disconnect power and turn off the water supply before servicing
• Pull the rack out; release and remove the damaged wheel from its mount
• Snap the new wheel securely in place and ensure it spins freely
• Reinstall the rack on the rails and verify smooth, even movement

This machine screw secures panels, brackets, and other components inside your appliance. Replacing a missing or damaged fastener restores a solid fit, reduces vibration and rattling, and helps keep assemblies properly aligned for reliable performance.

• 10-32 machine-thread fastener for mounting and securing internal parts and panels
• Helps maintain alignment and structural integrity of assembled components
• Replaces missing, stripped, or damaged hardware
• Reduces rattling, vibration, or loosening from worn fasteners

• Disconnect power; shut off gas or water supplies before servicing
• Match thread and length to the original fastener used in that location
• Start by hand to avoid cross-threading; tighten snugly without overtightening
• Reuse original washers or clips if present and in good condition

Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:

• Secures trim, panels, brackets and control housings to maintain proper assembly.
• Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
• Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
• Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.

• Disconnect power and water before servicing; wear eye protection and gloves.
• Use the correct screwdriver or driver bit to avoid stripping the screw head.
• Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
• If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.

This inline fuse is a replaceable safety device that protects your appliance's wiring and components from overcurrent. It restores circuit protection so the appliance can operate safely after a blown fuse is replaced. What it does:

• Protects the wiring harness and electrical components by interrupting power if a short or overload occurs
• Commonly used where a single-point fuse is needed inline with a circuit
• Resolves symptoms like a non-starting unit, intermittent power loss, or a tripped circuit when caused by a blown fuse
• Works as part of the appliance's electrical protection system when installed in the proper harness location

• Disconnect power to the appliance before inspecting or replacing the fuse
• Visually check the blown fuse or use a multimeter before replacing
• Install only in the correct harness location and ensure secure wire connections
• If the replacement fuse blows immediately, stop and diagnose the underlying short or fault

The Leveling Leg is an OEM part for Whirlpool dishwashers. It is an adjustable leg that is used to level the dishwasher and stabilize it when installed under the kitchen counter or inside cabinetry.  

Causes of a bad leveling leg often relate to normal wear and tear over time, repeated adjustments, or potential overtightening that leads to thread damage.

Symptoms of a bad leveling leg include:

• The dishwasher is not sitting level and appears unstable  
• Leaks occurring around the dishwasher perimeter or door seal
• Drainage or pooling of water inside the dishwasher
• Cabinetry or countertops showing scratches or wear

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Terminal Block is an OEM part for Whirlpool dishwashers.The terminal block facilitates the flow of electricity throughout the appliance, enabling functions like water heating, pump operation, and cycle control.

Causes can be normal wear over time, or damage from moisture exposure. If you notice any of the above symptoms, replace the terminal block with this genuine OEM part to restore reliable electrical connections and proper operation.

Symptoms of a bad terminal block include:

• The dishwasher not starting or unexpected beeping/error codes
• Sudden lack of hot water or drying issues
• Electrical shock hazard from exposed terminals

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Clip is an OEM part for Whirlpool dishwashers. It securely attaches the drain hose in place, directing wastewater out of the dishwasher during drain cycles.

Causes of a bad clip can be cracks, breaks, or deformations causing weakened grip. Normal wear and repeated drain cycles can also damage the clip over time.

Symptoms of a bad drain hose clip include:

• Water or leaks around the base of the dishwasher
• Puddles forming due to the hose slipping out of place
• Improper drainage if the hose is not positioned correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Track/Support is an OEM component specifically designed for Whirlpool dishwashers. It anchors underneath the dish rack and slides upon which it rolls. 

Causes of a faulty track/support can include cracks, deformities or other damage accumulating from years of bearing weight.

Symptoms of a bad track/support include: 

• Dishes failing to properly secure inside wash rack
• Rack sliding out of position unintentionally  
• Noisy vibrations or shaking heard from below

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

The Wire Harness Assembly is an OEM component for Whirlpool dishwashers. It is the main electrical wiring component that connects and transmits power between various areas and modules inside the dishwasher. 

Causes of a bad wire harness can include cracked, frayed, or damaged insulation over wiring due to normal movement and vibration during the wash cycle. 

Symptoms of a bad wire harness assembly include:

• Lights or elements failing to power on as expected  
• Control panel malfunctions or unintended switches in operation modes
• The entire dishwasher ceasing to function

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

A pronged cup washer that secures and cushions mating parts on appliances, restoring proper fit and reducing wobble. Replaces worn or damaged cup-style washers to help maintain stable component alignment and reliable operation. What it does:

• Fits into a cup or socket to hold shafts, knobs, or trim pieces in place
• Pronged design grips the mounting surface to prevent rotation and slippage
• Helps reduce vibration and noise caused by loose or worn washers
• Commonly used when a knob, shaft, or trim feels loose or wobbly

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove the related knob or trim carefully to access the washer; note orientation for correct reassembly
• Press the washer fully into the cup or socket so the prongs engage the mounting surface
• Inspect the surrounding components for wear and replace any damaged parts

Number-8, 18-thread screw used to secure panels, brackets and small assemblies in Whirlpool appliances. Replacing a missing or damaged screw restores secure mounting and helps stop rattling or loose parts. What it does:

• Fastens trim, panels, brackets or small appliance components that use a #8-18 threaded fastener
• Restores secure mounting when a screw is lost, stripped or damaged
• Helps eliminate vibration-related noise from loose parts
• Simple replacement part for basic fastening needs

• Disconnect power to the appliance before servicing and work on a cool, stable surface
• Use the correct screwdriver or driver bit to avoid cam-out or stripped heads
• Thread in straight and tighten until snug; do not over-torque to avoid stripping threads or damaging components
• Replace with the identical screw type and size for proper fit and function

This stainless steel fine filter traps food particles in the dishwasher sump to help keep wash water cleaner and improve cleaning performance. Durable, corrosion-resistant construction fits the factory filter location. What it does:

• Captures small food debris to prevent recirculation and redepositing on dishes
• Helps maintain proper water flow through the wash system
• Reduces the risk of clogs in the dishwasher pump and spray arms
• Supports consistent cleaning results when the filter is clean and installed correctly

• One stainless steel fine filter

• Disconnect power to the appliance before servicing
• Remove the lower rack and locate the sump area to access the filter
• Clean surrounding area of heavy debris before installing the new filter
• Reinstall securely and run a short cycle to confirm normal operation