Kdte204kps Parts

Replacement screw used to secure appliance panels and components. Small but essential, it restores proper fit and helps prevent rattling, misalignment, or parts coming loose after repair or service. What it does:

• Secures panels, trim, brackets and small appliance components to restore correct alignment and fit.
• Replaces missing, stripped or damaged fasteners that allow parts to shift or vibrate.
• Helps stop rattling or loose parts that can occur during operation.
• Works as a direct hardware replacement where this exact screw is specified.

• Disconnect power (and gas if applicable) before servicing the appliance.
• Use the correct size screwdriver or driver bit to avoid cam-out or stripped heads.
• Install with firm, even pressure—do not over-tighten to avoid stripping threads or cracking plastic parts.
• Replace with the exact OEM screw when specified to ensure correct fit and function.

Replacement clip adjuster arm for the appliance adjuster mechanism. Secures and positions the adjuster assembly to restore proper alignment and help reduce rubbing, misalignment, and excessive noise caused by a broken or worn clip. What it does:

• Secures and holds the adjuster assembly in the correct position.
• Restores proper alignment to moving assemblies to prevent rubbing or binding.
• Can reduce unusual noises or vibration caused by a loose or broken clip.
• Commonly replaced when the clip is cracked, bent, missing, or no longer holds.

• Disconnect power (and gas if applicable) before beginning any repair.
• Basic hand tools may be required; panel or component removal could be necessary to access the clip.
• Handle sharp edges and inspect adjacent fasteners or mating clips; replace any damaged hardware.

Includes: 2 mounting brackets, 2 clamps, 2 screws and hex key wrench.

The Dishwasher Installation Kit is an OEM part for Whirlpool dishwashers. It contains the brackets and hardware necessary to securely attach the dishwasher to your cabinetry. Proper mounting is important for the dishwasher to withstand vibration and movement during operation.

Causes for a bad mounting kit include worn or damaged original parts, improper previous installation, or the need to relocate the dishwasher.

Symptoms of a bad installation kit can include:

• Excessive noise, rattling, or shaking during the wash cycle
• The dishwasher becoming loose or detaching from cabinets
• Inability to properly level or adjust the height of the unit
• Stress on connecting hoses, tubing, or wiring

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures appliance panels, brackets, and internal components so they stay tight and rattle-free. Use it to replace missing, stripped, or corroded hardware and restore a safe, secure assembly.

• Fastens panels, brackets, covers, or assemblies to the appliance cabinet/frame
• Helps prevent vibration, rattling, and loosening during operation
• Replaces hardware that is missing, worn, rusted, or stripped
• Common signs you need this screw: loose or misaligned parts, rattling noises, or a cover that won't stay on

• Disconnect power; shut off water or gas if applicable before servicing
• Match length and thread to the original and replace like-for-like locations
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly without overtightening to prevent stripping plastic or sheet metal

This tube-feed is a replacement water feed tube that routes water to the appliance's dispensing or ice-making assembly, restoring proper water flow and helping stop leaks or interrupted fills. Use when the original tube is cracked, clogged, or missing. What it does:

• Directs water from the supply or inlet to the dispenser, ice maker, or internal valve assembly
• Restores proper water flow when the original tube is damaged, kinked, or leaking
• Helps prevent water leaks and intermittent filling caused by split or clogged tubing
• Works as a direct-fit replacement when the OEM part is required

• Replace with power and water supply shut off; turn off the water and unplug the appliance first
• Inspect fittings and clamps; use the correct connectors and tighten to prevent leaks
• Handle gently to avoid kinks; route the tube to match original path and clear of sharp edges

This is a replacement screw used to fasten panels, brackets, or small assemblies on Whirlpool appliances, restoring secure mounting and helping stop loose or rattling parts. It's a direct-fit fastener intended for repair or maintenance. What it does

• Secures panels, trim pieces, brackets, or components to the appliance frame
• Restores proper alignment and prevents vibration or rattling caused by missing or loose hardware
• Suitable as a like-for-like replacement for the original mounting screw
• Works wherever the OEM screw specification (size/head/thread) matches the original

• Always disconnect power (and water, if applicable) before beginning repairs.
• Hand-start fasteners to avoid cross-threading; tighten snugly but do not over-torque.
• Use the correct driver bit and wear eye protection when working around panels and springs.

This Pad-ins is a factory-style insulation pad that helps reduce heat transfer and dampen vibration inside the appliance. It restores original fit and helps protect nearby components from heat and abrasion. What it does:

• Provides thermal insulation to limit heat transfer to adjacent parts
• Cushions and dampens vibration and noise from moving components
• Helps prevent chafing or wear where panels or parts contact each other
• Can reduce symptoms such as hot spots, rattling, or scuffing near the pad location

• Disconnect power (and gas, if applicable) before starting any repair
• Remove panels as needed to access the pad; take photos for reassembly
• Peel-and-stick or adhesive-backed pads should be positioned carefully; press firmly to ensure adhesion
• If replacing adhesive-backed pads, remove old adhesive residue and follow OEM placement for best fit

This replacement lower dishrack restores the main loading surface in your dishwasher so dishes sit securely and spray reaches them for better cleaning. It replaces a cracked, rusted, or misshapen rack to help protect dishes and keep loading organized. What it does

• Provides a stable platform to hold plates, bowls and cookware during wash cycles
• Maintains correct spacing so spray arms can reach all items for effective cleaning
• Replaces bent or rusted rack wires that can snag or chip dishes
• Helps keep utensil baskets and rollers aligned for smooth rack movement

• One lower dishrack

• Remove dishwasher racks and disconnect water/electric only if required by your model; most rack swaps are simple hand installs
• Inspect and transfer any rollers, clips, or utensil baskets from the old rack to the new one if needed
• Handle carefully to avoid wire ends that may be sharp; wear gloves if helpful
• If rails or rollers are damaged, replace those parts as well for proper rack operation