Kdtm404kps Parts

Replacement silverware basket for dishwasher lower rack. Organizes and secures utensils during wash cycles. Needed when original is cracked or missing.

This factory screw secures components in your appliance to keep them properly mounted and stable during operation. Replacing a missing or damaged screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Fastens panels, brackets, or trim to maintain correct alignment
• Can address rattling, vibration, or loose/misaligned parts where this screw is used
• Helps prevent wear from movement caused by missing or stripped hardware

• Unplug power and shut off utilities before service
• Note original screw location and orientation; replace like-for-like
• Do not overtighten—start by hand to avoid cross-threading
• Address threads before installing the new screw

Replacement tub wheel that supports and guides the washer drum for smooth, aligned rotation. Replace worn wheels to reduce drum noise, rubbing and uneven spinning. What it does:

• Supports and guides the washer drum so it turns smoothly and stays aligned.
• Reduces friction between the drum and cabinet, helping prevent scraping or binding.
• Replace if the drum squeaks, drags, rubs, or wobbles during spin cycles.

• Disconnect power and turn off water supply before servicing the appliance.
• Access may require removing the cabinet, front or rear panel depending on model.
• Inspect adjacent shafts, bearings and mounts for wear and replace if needed.
• Reassemble and test the washer after installation to ensure proper drum movement.

Replacement dishwasher mounting screw secures panels, brackets, and internal components. Needed when original fasteners are missing, stripped, or damaged.

The dishwasher shield protects internal components from water and heat damage, typically located near the heating element or pump motor. Replace when you notice water leaking from unusual areas or if the shield appears cracked, warped, or corroded.

Replace cracked or worn dishwasher dishrack wheels that guide the upper rack in and out smoothly. Single wheel for convenient loading and unloading.

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.

Fix a loose heating element with this dishwasher heater terminal nut. Secures element studs to the tub exterior. Simple fix for missing or corroded nuts.

Dishwasher motor hums but won't start? This capacitor provides the phase shift needed for your circulation motor to run. Easy 15-minute repair.

Secures hose connections to circulation motor and sump in your dishwasher. Replace if loose or worn to prevent leaks. Confirm fit with your model number.

The Sensor is an OEM replacement part for Whirlpool dishwashers. It detects the level of dirt and food particles in the wash water to help the dishwasher adjust the wash cycle accordingly, providing efficient and thorough cleaning results. It monitors the clarity of the water and determines when additional rinsing or detergent is needed.

Symptoms of a faulty sensor include:

• Inadequate cleaning performance
• Dishes remaining dirty or stained after a wash cycle
• Extended cycle times or the dishwasher not completing the cycle

A bad sensor can occur due to regular usage, buildup of residue or debris, or electronic malfunctions. If you notice issues such as poor cleaning results, dishes not being thoroughly washed, or the dishwasher not completing the cycle, it may be time to replace the sensor with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fixes dirty water or food specks remaining after wash cycles. This check valve prevents backflow into the dishwasher sump. Moderately easy repair.

This factory screw secures panels, brackets, or components within your appliance. Using the correct OEM fastener helps ensure a snug fit and prevents loosening, rattling, or misalignment over time.

• Fastens metal or plastic components to maintain proper alignment
• Helps prevent vibration, noise, and loosened parts
• Common wear item that can strip, rust, or go missing
• Replaces damaged or missing hardware to restore secure mounting

• Disconnect power and shut off water or gas before service
• Note original screw location and orientation for proper reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• If threads are damaged, inspect the mating hole or clip before reuse

This is an insulation shield that wraps around the dishwasher tub. It helps reduce noise during wash cycles and assists with heat retention to improve drying performance. Replace this part if the insulation is damaged, missing, or deteriorated, which can result in a noticeably louder dishwasher or poor drying results.

Secures dishwasher racks to the tub wall for smooth sliding. Replace if cracked, broken, or causing racks to bind. Installs inside tub cavity.

This factory hardware nut secures threaded components inside your appliance, keeping parts tight and properly aligned during operation. Replace a stripped, corroded, or missing nut to restore a solid connection and prevent looseness or noise.

• Threads onto a matching bolt or stud to clamp parts together securely
• Helps maintain clamping force under vibration when properly tightened
• Replace if threads are worn, rounded, cracked, or rusted
• Symptoms can include loose or rattling parts, misalignment, or a fastener that won't tighten; in sealed water-path locations, leaks may occur

• Disconnect power; shut off water and/or gas before service
• Hand-start the nut to avoid cross-threading; finish tightening with the proper tool
• Do not overtighten; follow model-specific torque guidance if available
• Inspect the mating bolt/stud and any seals or washers during reassembly; replace if damaged