Kdtm404kps Parts

This factory hardware nut secures threaded components inside your appliance, keeping parts tight and properly aligned during operation. Replace a stripped, corroded, or missing nut to restore a solid connection and prevent looseness or noise.

• Threads onto a matching bolt or stud to clamp parts together securely
• Helps maintain clamping force under vibration when properly tightened
• Replace if threads are worn, rounded, cracked, or rusted
• Symptoms can include loose or rattling parts, misalignment, or a fastener that won't tighten; in sealed water-path locations, leaks may occur

• Disconnect power; shut off water and/or gas before service
• Hand-start the nut to avoid cross-threading; finish tightening with the proper tool
• Do not overtighten; follow model-specific torque guidance if available
• Inspect the mating bolt/stud and any seals or washers during reassembly; replace if damaged

This is the left-side rack adjuster and wheel assembly for the middle dishwasher rack. It allows you to raise or lower the rack height to accommodate different dish sizes and ensures the rack slides in and out smoothly. Replace this part if the rack is difficult to slide, sits unevenly, tilts to one side, or the wheels are cracked or broken.

Replacement water supply hose for dishwashers. Connects household water line to the dishwasher inlet. Replace if cracked, leaking, or damaged.

Precision ring that positions and secures internal dishwasher components. Replace when worn, cracked, or missing to restore proper fit and alignment.

Sound shield installs behind the toe plate at the bottom of your dishwasher to insulate and reduce noise. Replace if cracked, missing, or damaged.

This is the upper dish rack assembly that slides in and out of the dishwasher on rails and holds cups, glasses, and smaller items during the wash cycle. It includes the rack frame with tines and support bars for organizing dishes. Replace this rack if the tines are broken, the coating is peeling and causing rust, or the rack no longer slides smoothly on its tracks.

This is a rail track that supports and guides the 2nd and 3rd level dish racks as they slide in and out of the dishwasher. It mounts inside the tub and allows smooth movement of the rack assemblies. Replace this part if the dish racks are difficult to slide, sit unevenly, or if the existing rail is cracked or broken.

Fix poor drying or lingering moisture with this dishwasher air vent. Restores proper airflow and circulation for consistent drying performance.

This stud is a small mounting fastener that provides a secure anchor point for attaching appliance components. Replacing a worn or missing stud restores a tight, aligned fit and helps prevent looseness, rattles, or shifting.

• Provides a fixed, threaded anchor for mounting a handle, bracket, or panel
• Helps keep parts aligned and secure during normal operation
• Common replacement for studs that are stripped, bent, broken, or missing
• Symptoms can include a loose or wobbly component, difficulty tightening, or visible damage/corrosion

• Disconnect power and, if applicable, shut off water or gas before servicing
• Wear cut-resistant gloves and handle panels carefully
• Hand-start threads to avoid cross-threading; tighten snugly without over-torquing
• Reinstall any covers or related hardware in their original positions

Fix dishwasher not starting, not draining, or wash pump issues with this lower wiring harness. Connects control board to motors and sensors below tub.

The Clip is an OEM part for Whirlpool dishwashers. It securely attaches the drain hose in place, directing wastewater out of the dishwasher during drain cycles.

Causes of a bad clip can be cracks, breaks, or deformations causing weakened grip. Normal wear and repeated drain cycles can also damage the clip over time.

Symptoms of a bad drain hose clip include:

• Water or leaks around the base of the dishwasher
• Puddles forming due to the hose slipping out of place
• Improper drainage if the hose is not positioned correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This manifold directs gas from the valve assembly to the range's burners so they ignite reliably. It replaces a damaged or leaking manifold to restore proper gas flow and even burner operation. What it does

• Channels gas from the control valve to individual burners for ignition.
• Helps maintain steady burner flames and consistent cooking heat.
• Can prevent gas leaks caused by cracked or corroded manifold passages.
• Addresses symptoms like uneven flames, burners that won't light, or visible manifold damage.

• One replacement manifold as shown.

• Turn off gas supply and electricity to the appliance before starting any work.
• Inspect associated gaskets, fittings and valves for wear; replace any damaged components.
• Use proper tools and follow manufacturer torque and sealing recommendations.

Drip tray that installs under the front of the dishwasher tub. Collects excess water and rinse aid, protecting internal components. Replace if cracked or worn.

Dishwasher not responding to controls or has no power? The wire harness assembly connects electrical components. Moderate difficulty repair.

Right side support for dishwasher third level rack. Provides secure placement and stability for the upper rack. Replace when cracked, bent, or broken.

Top rack not cleaning? This water diverter directs wash water to the upper spray arm, restoring proper distribution and spray coverage for thorough cleaning.