Kdtm404kps Parts

Replacement spray arm for your dishwasher. This rotating component distributes water throughout the wash cycle. Replace if cracked, broken, melted, or missing pieces.

The Drain Hose is an OEM part for Whirlpool dishwashers. It channels water out of the dishwasher tub and into the garbage disposal or drain after each cycle. This drain hose is specifically designed to withstand frequent temperature fluctuations and mineral deposits without compromising its integrity over time.

Causes of a bad Drain Hose can include mineral buildup inside the hose restricting flow, cracks developing from repeated flexing during drain cycles, or cuts or abrasions from rough handling or sharp surfaces.

Symptoms of a bad Drain Hose include:

• Water not draining properly or draining slowly after cycles
• Puddles or leaks found near or under the dishwasher
• Musty smells from standing water inside or around the unit
• Possible flooded floors near the dishwasher area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Dishwasher not starting or buttons unresponsive? The electronic control board manages all dishwasher functions. Moderate difficulty repair, 30-60 minutes.

If your dishwasher door won't stay closed or pops open during cycles, the door latch may need replacement. Moderate DIY repair with inner panel access.

The Lower Dishrack Roller Assembly is an OEM part for Whirlpool dishwashers. As an integral component, the lower dishrack roller assembly supports smooth movement and positioning of the lower dishrack. Its precision ball bearings allow for effortless extension and retraction of the lower rack.

Causes of a bad lower dishrack roller assembly can include wear and tear of bearings over time, stripped or damaged rails, or failure of rollers due to excessive loading.  

Symptoms of a bad lower dishrack roller assembly include:

• Difficulty extending or retracting the lower dishrack  
• Noisy or stuck operation of the lower rack
• Rack failing to remain securely in place during wash cycles
• Dishes shifting or falling during wash due to uneven support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and some Maytag and GE dishwashers. 

The Hose is an OEM part for Whirlpool dishwashers. It connects the dishwasher pump and sump, functioning to drain and recirculate water throughout cycles.

Causes of failure can include mineral buildup inside the hose, splitting, and cracking of the lining from continuous heat and pressure usage over time.

Symptoms of a bad pump to sump hose include:

• Inadequate drainage and water removal from cycles
• Standing water left in the bottom of the dishwasher tub
• Leaks developing from hose connections at the pump or sump area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Drain hose connects your dishwasher drain pump to household plumbing. Replace if cracked, kinked, clogged with grease, or leaking during drain cycles.

The Vent Gasket is an OEM part for Whirlpool dishwashers. It is responsible for sealing the vent area of the dishwasher, preventing any leaks or air gaps that could compromise the efficiency of the appliance.

A bad vent gasket can be caused by wear and tear, exposure to high temperatures, or damage due to food debris or cleaning agents. If you notice water leakage or steam escaping from the vent area, it may indicate a problem with the vent gasket.

Symptoms of a bad vent gasket include:

• Water leakage or drips from the vent area
• Steam escaping from the vent during operation
• Moisture remaining on dishes after a cycle
• Increased noise levels coming from the vent area

Replace your faulty vent gasket with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This small black cap covers a screw or fastener opening inside the dishwasher tub. It provides a finished look and prevents water or debris from collecting in the screw hole. Replace it if the cap is missing, cracked, or no longer stays in place.

The Seal is an OEM part for Whirlpool dishwashers. This part is responsible for creating a watertight seal between the dishwasher and the surrounding cabinet, preventing any leaks or water damage.

A bad seal can occur due to normal wear and tear, exposure to heat and moisture, or physical damage. If you notice symptoms such as water leaking from the sides or bottom of your dishwasher, dampness or moisture around the cabinet area, or difficulty in closing the dishwasher door properly, it may be time to replace this part.

Symptoms of a bad seal include:

• Water leaking from the sides or bottom of the dishwasher
• Dampness or moisture around the cabinet area
• Difficulty in closing the dishwasher door properly

Restore your Whirlpool dishwasher by replacing the worn or damaged dishwasher cabinet seal with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Dishes staying wet after cycle? The inner door vent allows moisture to escape during drying. Replace it if airflow is blocked or the vent is damaged.

Right-side upper rack adjuster for dishwashers. Mounts to the rack system to raise or lower the upper rack and maintain level alignment. Replace if broken, cracked, or missing.

Connects your dishwasher to the electrical outlet. Includes cord, grommet, and strain relief. Replace if damaged, frayed, or missing during installation.

This is the outer decorative panel that covers the front of the dishwasher door, providing a finished stainless steel appearance. It attaches to the door assembly and houses or supports the control panel and handle. Replace this panel if it is dented, scratched, discolored, or rusted, or if you are updating the exterior look of your dishwasher.

Replace your dishwasher's power cord kit if the existing cord is damaged, frayed, or missing. Includes cord with right angle head, grommet, and strain relief for safe electrical connection.