Kems378shw05 Parts

This lamp holder secures and powers the oven/cabinet G4-base bulb so interior lighting works reliably and safely. It restores proper bulb contact and helps prevent flickering or intermittent lighting. What it does:

• Holds the G4-base light bulb in place and provides the electrical connection
• Restores interior lighting when the socket is loose, corroded, or damaged
• Helps stop flickering or intermittent on/off issues caused by a faulty holder
• Compatible with the oven/cabinet light assembly that uses a G4-style bulb

• Disconnect power to the appliance before servicing to avoid shock
• Allow the appliance and bulb to cool before touching components
• Inspect wiring and connectors; replace the holder if terminals are corroded or melted
• Use the correct G4 bulb type and wattage per the appliance manufacturer's instructions

This small replacement bumper cushions contact points to reduce noise, prevent wear, and help doors or panels close more quietly and sit flush. Use it to restore proper cushioning where an original bumper is worn or missing. What it does:

• Absorbs shock and prevents metal-to-metal contact that can cause noise or chipping
• Helps doors, panels, or components close more softly and remain properly seated
• Reduces vibration transferred to surrounding parts for quieter operation
• Restores protective spacing to prevent rubbing and premature wear

• Disconnect power to the appliance before servicing and follow the manufacturer's safety instructions
• Typically installs at the contact point; remove the old bumper and press or place the replacement into position
• If the bumper uses adhesive or a fastener, use the same method indicated by the OEM for secure fitment

A replacement mounting screw used to secure appliance panels and components. Restores a missing or stripped fastener so parts sit flush and stay in place for reliable operation. What it does

• Fastens panels, brackets, and trim to the appliance chassis
• Prevents rattling, loose panels, and misaligned parts when installed correctly
• Replaces missing or damaged screws to restore proper fit and function

• Disconnect power to the appliance before working on it
• Use the correct-size screwdriver or driver bit to avoid cam-out or stripping
• Install by hand until started, then snug; avoid over-tightening to prevent damage
• Keep removed hardware organized and compare to the replacement before installing

This is a threaded machine screw used to fasten appliance panels and components. It restores secure attachment points so panels, brackets, and assemblies stay firmly mounted and reduce rattling or misalignment. What it does

• Secures panels, brackets, or small components to the appliance chassis
• Restores loose or missing fasteners that cause vibration, rattling, or unsecured parts
• Provides the correct thread engagement to prevent stripped holes when installed properly
• Works wherever an 8-18 threaded screw is specified by the manufacturer

• Disconnect power to the appliance before beginning any repair.
• Use the correct screwdriver or nutdriver to avoid stripping the head.
• Do not overtighten; snug until secure to prevent damage to threads or panels.
• Follow manufacturer service instructions for safe disassembly.

This noise filter reduces electrical interference on the appliance's power line to help prevent buzzing, humming or intermittent operation caused by electrical noise. It restores quieter, more reliable performance when the filter is the worn component. What it does:

• Suppresses electrical noise and interference on the appliance power line
• Helps reduce audible buzzing, humming or intermittent electronic behavior
• Protects sensitive control electronics from stray electrical transients
• Restores normal operation when a damaged filter is the root cause

• Disconnect power before servicing to avoid shock hazard
• Handle and mount the filter per OEM orientation; secure connections firmly

This heat shield installs inside the oven cavity to deflect intense heat away from nearby components. Replacing a warped or missing shield helps protect the control area and supports proper heat distribution during broiling.

• Deflects radiant heat from the upper heating zone to protect wiring, insulation, and the control assembly
• Helps maintain safe temperatures around the console and door trim
• Supports consistent heat distribution in the oven cavity
• Helps with: visible warping or missing shield, scorching/discoloration above the door, excessive heat at the console, burning odors during broil

• Disconnect power at the breaker and allow the appliance to cool completely
• Remove oven racks and access the shield per your model's design
• Match the original orientation and secure with the existing mounting hardware
• Ensure the shield is firmly seated and clear of heating elements before restoring power

This tension spring restores proper movement and tension for the appliance component it secures, helping the part operate smoothly and reliably. It's a simple replacement that fixes common issues caused by worn or broken springs. What it does:

• Provides tension to hold or return a moving component to its correct position
• Helps stop sagging, slipping, or loose operation of doors, latches, or levers
• Can reduce rattling or unusual noises caused by a failed spring
• Restores normal mechanical action when the original spring is stretched or broken

• Disconnect power to the appliance before starting any repair
• Springs can be under tension—use appropriate tools and wear eye/hand protection
• Compare the new spring to the old one for length, coil size, and end fittings before installation

This support is a replacement mounting bracket that stabilizes and secures internal components to prevent movement and wear. It restores proper alignment and reduces vibration and noise caused by a damaged or missing support. What it does

• Provides structural support for internal appliance assemblies to keep parts aligned.
• Reduces vibration and rattling that can occur when a support is cracked or broken.
• Prevents sagging or shifting of panels and components that may lead to further wear.
• Helps maintain normal operation by keeping moving parts properly positioned.

• Disconnect power (and water if applicable) before beginning any repair.
• Remove any panels or components blocking access.
• Verify bracket orientation and mounting hole alignment before tightening fasteners.
• Use appropriate hand tools and avoid overtightening to prevent damage; replace any fasteners that are worn or damaged.