Kenmore 11026002011 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10004910
Factory fastener that secures panels and components in your laundry center. Replace if missing, stripped, or corroded to maintain proper alignment.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10297443
Fix power interruptions and intermittent electrical faults in your washer with this lower wire harness. Routes power and signals between lower components.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10351989
Fix a washer that won't complete cycles or stops mid-wash with this electronic control board. Restores button inputs, display, and cycle selection.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10205824
This is a rubber or foam impact absorber pad that sits between the outer tub and the washer frame to dampen vibration and reduce noise during the spin cycle. These pads wear down over time from repeated compression. Replace this part if your washer is excessively noisy, vibrates heavily during spinning, or if the existing pad appears flattened or deteriorated.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10280024
Secures U-shaped drain hoses or heating elements in washers. Replace if cracked, broken, or missing to prevent hose movement and potential leaks.
Do-It-Yourself Stories from Customers like You
F02 fail to drain repeated suds warnings John C. • Eagle River , AK • February 18, 2019
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11596033
This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:
- Fastens panels, brackets or small components to maintain structural stability
- Replaces missing or worn screws that cause vibration, rattling, or loose parts
- Restores secure connections after repairs or part replacements
- Helps prevent further damage by keeping parts properly aligned
What's included: One screw. Install notes:
- Turn off and unplug the appliance before servicing to avoid shock or injury
- Use the correct screwdriver or bit to avoid stripping the head
- Thread carefully and hand-start the screw to prevent cross-threading
- Keep small parts away from children and pets during installation
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10525195
If your laundry center won't power on or has a damaged cord, this power cord replacement restores electrical connection. Simple plug-in repair.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10293230
This is a small bearing that fits into the right-side lid hinge on a top-load washer, allowing the lid to pivot open and closed smoothly. It reduces friction and wear on the hinge assembly. Replace this bearing if the lid feels stiff, wobbly, or makes grinding or squeaking noises when opening or closing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10392973
Washer won't start, cycle through, or complete? This main control board manages filling, agitating, spinning, and draining functions. Moderate DIY repair.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10596395
Main outer cabinet housing for washers. Replaces cracked, dented, or damaged exterior panels. Provides structural support and finished appearance.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10676061
Molded protective cover that shields wiring from heat and abrasion in laundry centers. Replace if cracked, broken, or missing to protect wires safely.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879
Do-It-Yourself Stories from Customers like You
Kenmore washer made humming noise no agitation no more spin Peter W. • Cupertino , CA • October 18, 2026
Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10549845
Do-It-Yourself Stories from Customers like You
Broken spider assembly; aka washer drum shaft assembly Jeff J. • Los Angeles , CA • November 01, 2015
I followed Matt's awesome video from AppliancePartsPros.com to build up my "I can do this" reserves. But here's the story leading up to that point...
We purchased our Samsung WF419 on a “Black Friday” special November 2009 expecting to get some good years out of the washer/dryer pair. We don’t run more than 2 or 3 loads a week in the washer, so ours has had relatively little use over the beginning of its anticipated and expected long life-cycle. When the “thumping” started on the spin cycle a...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11573574
Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.
Do-It-Yourself Stories from Customers like You
Boot on front had a hole in it Chris R. • Aberdeen , MS • January 22, 2016
Ordered boot watched video had no trouble finding ,parts easily entered part num,no problems at all
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10005430
Secures washer hoses to connections preventing leaks and detachment during operation. Replace when clamps become worn or loose. Verify fit with your model.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10324648
Outer tub assembly for top-load washers. Replace if cracked, broken, or damaged from impact. Houses the inner basket and connects to gearcase assembly.
Do-It-Yourself Stories from Customers like You
Outer tub was busted/broken Gary E. • Ennice , NC • April 11, 2014
Order a new tub and replaced. The machine was in some kind of accident and brand new, so the repair was simple. Had to tear the machine completely apart and reassemble. Tested machine and worked perfectly. Thanks for your prompt service and quick delivery of the part.
Read more
More