Kenmore Elite Front Loading Washer Model Parts

Replacement water-line tube that routes water inside the refrigerator to the ice maker or dispenser, helping restore proper water flow and reduce leaks. Designed to match factory routing so the line fits and seals correctly at the connections. What it does:

• Carries water from the cabinet valve to the ice maker or dispenser.
• Restores normal dispenser flow and ice production when the tube is cracked, pinched, or clogged.
• Helps stop visible leaks or pooling caused by damaged or misrouted tubing.
• Matches factory bends for correct routing and clearance behind panels.

• Disconnect power and shut off the water supply before starting any work.
• Remove shelves or panels as needed for access; watch for sharp edges.
• Check and replace any worn clamps or fittings; tighten connections and test for leaks with water on before reassembling.

This genuine oven bake element heats the oven cavity for baking and roasting, restoring proper cooking temperatures and consistent results. Replaces a damaged or non-heating bake element to bring your oven back to service. What it does:

• Heats the oven cavity so food reaches and holds set temperatures
• Restores even baking and roasting when the oven fails to heat
• Replaces elements that show visible damage, burn-through, or no glow
• Works with electric ovens that use a separate bake heating element

• Disconnect power to the appliance at the breaker before starting work
• Handle the element carefully to avoid bending or damaging terminals
• Remove oven racks and access the element from inside the oven
• Verify proper fit and secure mounting; tighten terminal fasteners firmly and restore power to test

This genuine door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper temperature. It's a direct-fit replacement that keeps cold air in and warm air out for better cooling performance. What it does:

• Seals the refrigerator door edge to prevent air leaks and reduce frost buildup
• Helps maintain consistent internal temperatures for food safety
• Reduces excessive compressor run time caused by a failing seal
• Stops drafts and moisture intrusion that can cause ice or condensation

• One door gasket assembly as shown

• Unplug the appliance before starting any work and remove any items from the door
• Peel out the old gasket and clean the gasket channel before installing the new seal
• Fit the gasket into the channel, working around the door so the seal seats evenly; warm water or a hair dryer may help soften the gasket for easier installation (use low heat)
• Check the door swing and seal around the perimeter after installation

This door gasket assembly replaces a worn or damaged refrigerator door seal to help maintain an airtight closure and consistent cooling. Restores proper sealing to reduce frost buildup and improve temperature control. What it does:

• Creates an airtight seal around the refrigerator door to keep cold air in and warm air out
• Helps prevent frost and moisture buildup inside the compartment
• Reduces strain on the compressor by improving energy efficiency when sealing is restored
• Common symptom: visible cracks, tears, gaps, or a door that fails to close tightly

• Disconnect power to the appliance before beginning any repairs
• Remove the old gasket carefully to avoid damaging the door finish or retainer; warm or softening the gasket can ease removal
• Align the new gasket evenly and press into the retainer; some models use screws or clips

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This guide assembly rail replaces a worn or damaged drawer slide to restore smooth, stable drawer movement and proper alignment. It helps reduce sticking, misalignment, and rattling for a secure fit and quiet operation. What it does:

• Guides and supports the drawer or compartment during open/close cycles
• Restores smooth sliding action and consistent alignment
• Reduces noise caused by worn or bent rails or guides
• Helps prevent drawers from catching or binding

• Disconnect power and empty the drawer before beginning service
• Removal of the drawer and access panel may be required; keep fasteners for reassembly
• Align the rail before tightening fasteners; use basic hand tools

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized

This water tube routes drinking water from the refrigerator's supply to the dispenser/ice system, restoring proper water flow for dispensing and ice-making. Use when water flow is reduced, leaking, or the tube is cracked or clogged. What it does:

• Carries potable water between the internal components (valve, dispenser, ice maker) for dispensing and ice production
• Replaces cracked, split, or clogged tubing that causes leaks or poor water flow
• Helps stop visible leaks and restores consistent dispenser flow when tubing is the fault
• Compatible with systems that use a molded plastic water line rather than braided or metal tubing

• Turn off water supply and unplug the appliance before beginning work
• Drain residual water from the line and catch any spillage with a towel or small container
• Inspect fittings and seals; replace O-rings or clamps if damaged

This replacement burner is the cooktop surface heating element that provides consistent heat for pots and pans. It restores stovetop cooking performance and is sized to match the original heating location. What it does:

• Heats cookware on the stove top for boiling, frying, and simmering
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps eliminate uneven heating and hotspots caused by a failing burner
• Designed to mate with the original cooktop terminals for proper electrical connection

• Disconnect power at the breaker before starting any repair to avoid shock
• Allow the cooktop to cool fully and handle the element carefully to avoid glass/ceramic damage
• Secure all connections

Replacement electronic controller that manages the appliance's main functions and user interface, restoring control of cycles, timing and display responses. Use this board to replace a failed or unresponsive controller and return reliable operation. What it does:

• Controls cycle timing, sequencing and key operational logic for the appliance.
• Interfaces with the user controls and display so selections and commands register correctly.
• Regulates signals to motors, valves and heaters as directed by the control program.
• Symptoms of a failing controller may include unresponsive buttons, incorrect or flashing error codes, display problems, or the appliance not starting.

• Always disconnect power to the appliance before starting any repair to avoid shock or damage.
• Handle the board by its edges and avoid touching circuitry; use proper ESD precautions if available.
• Basic tools are typically required to access the control housing.

This door gasket creates a tight seal around the refrigerator door to help maintain consistent internal temperature and reduce energy use. Replacing a worn or torn gasket restores door sealing and helps prevent frost buildup. What it does:

• Seals the refrigerator door edge to keep cold air in and warm air out
• Helps prevent frost and ice buildup in the fresh food or freezer compartment
• Common symptom: visible cracks, tears, or a gap causing warm food or temperature fluctuation
• Common symptom: condensation or frost along the door seal or inner cabinet

• Turn off power to the appliance and empty the door area before starting
• Remove the old gasket carefully; inspect and clean the gasket channel and mating surface before installing
• Press the new gasket into the channel evenly; ensure magnets seat fully for a consistent seal

This tray cover assembly replaces a cracked or missing ice tray cover to keep ice protected and help the ice bin stack and slide correctly. It restores a clean seal and simple access to the ice storage area. What it does:

• Covers and protects ice in the ice bin from odors and debris
• Helps maintain proper alignment and sliding action of the ice bin
• Prevents spills and reduces ice melting caused by gaps or damage
• Commonly replaced when the cover is cracked, warped, or missing

• One tray cover assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and any remaining ice before installing the cover
• Handle plastic components carefully to avoid cracking; align tabs and slides before seating

This guide assembly replaces the internal guide that helps align and support the TV panel and internal components, restoring proper fit and reducing rattles or misalignment. It's a straight swap for damaged or worn guides. What it does:

• Holds and aligns the display panel and internal modules to maintain correct spacing and fit
• Prevents panel movement that can cause rubbing, rattling, or uneven gaps
• Restores secure mounting after impact or wear that bent or broke the original guide
• Helps ensure proper chassis alignment for accurate screen placement and service access

• Disconnect power and remove the TV from its stand or wall before servicing
• Handle the display panel and internal cables carefully to avoid damage
• Use appropriate screwdrivers and keep fasteners organized for reassembly

A replacement glide rail assembly that supports and guides a refrigerator/freezer drawer for smooth opening and closing. Restores proper drawer tracking and helps prevent sticking or misalignment. What it does:

• Provides the rail and mounting components that the drawer slides on for stable operation
• Restores smooth drawer movement and alignment when original rail is bent or worn
• Helps reduce drawer sticking, scraping, or uneven travel
• Intended for use where the OEM glide/rail assembly is specified

• One glide rail assembly

• Follow the appliance manufacturer's service manual for removal and installation steps
• Disconnect power and empty the drawer before working to prevent injury or damage
• Inspect mounting hardware and drawer slides; replace any damaged fasteners
• Use basic hand tools;

This door basket is a replacement refrigerator door bin that restores secure storage on the door shelves, helping keep bottles, condiments and small items organized and upright. What it does:

• Replaces a cracked, broken or missing door bin so items no longer fall out when opening the door
• Provides a molded shelf edge to keep bottles and containers upright
• Restores original storage capacity and organization to the refrigerator door
• Designed to snap into the door shelf mounting points for a stable fit

• One refrigerator door basket

• Remove all items from the door before replacing the bin
• Align the bin with the door shelf mounting slots and press until it snaps into place
• No special tools typically required; handle with care to avoid cracking plastic

This door gasket assembly seals the refrigerator door to help maintain proper internal temperature and reduce energy loss. Replacing a worn or torn gasket restores a tight seal for better cooling and food preservation. What it does:

• Forms an airtight seal between the refrigerator door and cabinet to limit warm air entry
• Helps prevent frost buildup and condensation that can occur with a failing seal
• Reduces compressor run time caused by air leaks, improving cooling consistency
• Commonly replaced when gasket is torn, deformed, hard, or no longer seats properly

• Disconnect power to the appliance before starting any repair.
• Inspect the door edge and mounting channel; remove any debris before seating the new gasket.
• Warm the gasket slightly if needed to help it seat; avoid open flames or overheating.
• Verify even seating around the entire door and check door alignment; run a paper test to confirm a consistent seal.