Kenmore Elite Model Parts

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized

This genuine oven bake element heats the oven cavity for baking and roasting, restoring proper cooking temperatures and consistent results. Replaces a damaged or non-heating bake element to bring your oven back to service. What it does:

• Heats the oven cavity so food reaches and holds set temperatures
• Restores even baking and roasting when the oven fails to heat
• Replaces elements that show visible damage, burn-through, or no glow
• Works with electric ovens that use a separate bake heating element

• Disconnect power to the appliance at the breaker before starting work
• Handle the element carefully to avoid bending or damaging terminals
• Remove oven racks and access the element from inside the oven
• Verify proper fit and secure mounting; tighten terminal fasteners firmly and restore power to test

This replacement burner is the cooktop surface heating element that provides consistent heat for pots and pans. It restores stovetop cooking performance and is sized to match the original heating location. What it does:

• Heats cookware on the stove top for boiling, frying, and simmering
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps eliminate uneven heating and hotspots caused by a failing burner
• Designed to mate with the original cooktop terminals for proper electrical connection

• Disconnect power at the breaker before starting any repair to avoid shock
• Allow the cooktop to cool fully and handle the element carefully to avoid glass/ceramic damage
• Secure all connections

This tray cover assembly replaces a cracked or missing ice tray cover to keep ice protected and help the ice bin stack and slide correctly. It restores a clean seal and simple access to the ice storage area. What it does:

• Covers and protects ice in the ice bin from odors and debris
• Helps maintain proper alignment and sliding action of the ice bin
• Prevents spills and reduces ice melting caused by gaps or damage
• Commonly replaced when the cover is cracked, warped, or missing

• One tray cover assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and any remaining ice before installing the cover
• Handle plastic components carefully to avoid cracking; align tabs and slides before seating

This guide assembly replaces the internal guide that helps align and support the TV panel and internal components, restoring proper fit and reducing rattles or misalignment. It's a straight swap for damaged or worn guides. What it does:

• Holds and aligns the display panel and internal modules to maintain correct spacing and fit
• Prevents panel movement that can cause rubbing, rattling, or uneven gaps
• Restores secure mounting after impact or wear that bent or broke the original guide
• Helps ensure proper chassis alignment for accurate screen placement and service access

• Disconnect power and remove the TV from its stand or wall before servicing
• Handle the display panel and internal cables carefully to avoid damage
• Use appropriate screwdrivers and keep fasteners organized for reassembly

A replacement glide rail assembly that supports and guides a refrigerator/freezer drawer for smooth opening and closing. Restores proper drawer tracking and helps prevent sticking or misalignment. What it does:

• Provides the rail and mounting components that the drawer slides on for stable operation
• Restores smooth drawer movement and alignment when original rail is bent or worn
• Helps reduce drawer sticking, scraping, or uneven travel
• Intended for use where the OEM glide/rail assembly is specified

• One glide rail assembly

• Follow the appliance manufacturer's service manual for removal and installation steps
• Disconnect power and empty the drawer before working to prevent injury or damage
• Inspect mounting hardware and drawer slides; replace any damaged fasteners
• Use basic hand tools;

This water tube routes drinking water from the refrigerator's supply to the dispenser/ice system, restoring proper water flow for dispensing and ice-making. Use when water flow is reduced, leaking, or the tube is cracked or clogged. What it does:

• Carries potable water between the internal components (valve, dispenser, ice maker) for dispensing and ice production
• Replaces cracked, split, or clogged tubing that causes leaks or poor water flow
• Helps stop visible leaks and restores consistent dispenser flow when tubing is the fault
• Compatible with systems that use a molded plastic water line rather than braided or metal tubing

• Turn off water supply and unplug the appliance before beginning work
• Drain residual water from the line and catch any spillage with a towel or small container
• Inspect fittings and seals; replace O-rings or clamps if damaged

This door basket is a replacement refrigerator door bin that restores secure storage on the door shelves, helping keep bottles, condiments and small items organized and upright. What it does:

• Replaces a cracked, broken or missing door bin so items no longer fall out when opening the door
• Provides a molded shelf edge to keep bottles and containers upright
• Restores original storage capacity and organization to the refrigerator door
• Designed to snap into the door shelf mounting points for a stable fit

• One refrigerator door basket

• Remove all items from the door before replacing the bin
• Align the bin with the door shelf mounting slots and press until it snaps into place
• No special tools typically required; handle with care to avoid cracking plastic

This door gasket assembly seals the refrigerator door to help maintain proper internal temperature and reduce energy loss. Replacing a worn or torn gasket restores a tight seal for better cooling and food preservation. What it does:

• Forms an airtight seal between the refrigerator door and cabinet to limit warm air entry
• Helps prevent frost buildup and condensation that can occur with a failing seal
• Reduces compressor run time caused by air leaks, improving cooling consistency
• Commonly replaced when gasket is torn, deformed, hard, or no longer seats properly

• Disconnect power to the appliance before starting any repair.
• Inspect the door edge and mounting channel; remove any debris before seating the new gasket.
• Warm the gasket slightly if needed to help it seat; avoid open flames or overheating.
• Verify even seating around the entire door and check door alignment; run a paper test to confirm a consistent seal.

The Drain Tube Assembly is an OEM part for LG refrigerators. This drain tube assembly is responsible for directing condensation and melt water that accumulates in the refrigerator away to the evaporator pan.

Causes can include cracks developing from limescale or mineral accumulation, flexing fatigue from repeatedly catching drips, or damage from improper cleaning methods.

Symptoms of a bad drain tube assembly include:

• Puddles or leaks developing underneath the refrigerator
• Poor air flow from vents and higher temperatures
• Ice or moisture buildup in refrigerator walls and seals
• Water stains or corrosion appearing inside the unit

This OEM LG part is also compatible with some Kenmore models.

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This wire rack provides a sturdy, corrosion-resistant shelf surface to support food containers, pans and other items inside the compartment. It restores usable storage space and helps keep items organized and level. What it does

• Replaces a bent, broken or missing wire shelf so items sit flat and don't slide or tip
• Supports dishes, trays and food containers for safe storage and even airflow
• Maintains proper spacing for drawers and other interior components to operate
• Visible wear or rust on the wires can cause sharp edges or instability

• High-level swap: remove any items, lift out the old rack and set the new rack into the existing support grooves or clips
• No special tools typically required; gentle pressure may be needed to seat rack into supports
• If rack has mounting clips, confirm clips are intact and positioned correctly before use
• For safety, avoid forcing parts;

This door hinge restores proper door alignment and smooth opening/closing for compatible refrigerators. Replaces a worn or damaged hinge to reduce sagging and help the door seal correctly. What it does

• Provides the pivot point that lets the refrigerator door open and close smoothly.
• Restores proper door alignment to improve sealing and temperature control.
• Commonly replaces hinges that are bent, cracked, noisy, or causing a sagging door.
• Helps eliminate rubbing, scraping, or binding during door movement.

• Disconnect power to the appliance and empty or support the door before removing the old hinge.
• Use appropriate hand tools; two-person assistance is recommended for lifting or aligning the door.
• Follow the manufacturer's service instructions and torque specs when reinstalling fasteners.

A genuine replacement refrigerator door handle that restores a secure grip and reliable opening on compatible units. Designed to match the original fit and finish so you can use the door normally again. What it does:

• Replaces a broken, cracked or missing refrigerator door handle
• Provides a solid grip for opening and closing the door smoothly
• Restores proper alignment and appearance of the door front
• Helps prevent further damage from improvised grips or taped-on handles

• One replacement refrigerator door handle

• Basic hand tools typically required; follow the OEM instructions for fastener locations
• Work carefully to avoid scratching the door finish and to retain any mounting clips or screws
• If the handle is near electrical components, unplug the appliance or disconnect power before starting

This case assembly is the outer housing for the Magic Room compartment, restoring proper fit and protection for internal components. Replaces a cracked, warped or damaged compartment case to help maintain compartment integrity and appearance. What it does:

• Provides the structural housing for the Magic Room compartment and secures internal components
• Restores proper alignment and fit to prevent rubbing or interference with doors/drawers
• Helps maintain an even internal compartment environment by sealing the compartment area
• Addresses visible damage such as cracks, broken mounting tabs or deformation

• Refer to the refrigerator's service manual for disassembly/reassembly steps and proper fastener torque
• Disconnect power to the appliance before starting any repair to avoid electrical hazard
• Handle plastic components carefully to avoid further cracking; replace any broken mounting clips
• Replace damaged screws or brackets with OEM-specified hardware for a secure fit

This bucket cover restores the top enclosure of the washer tub so water stays contained and the wash basket operates as designed. It helps protect laundry and internal components from splashes and debris. What it does:

• Fits over the wash bucket to cover the tub opening and direct water flow
• Helps prevent water spray and leaks during fill and spin cycles
• Keeps clothing and loose items from entering the tub gap
• Contributes to stable basket operation and reduces direct contact with internal parts

• Disconnect power and water supply before beginning any repair
• Remove the cabinet or access panel as required by your model to reach the bucket area
• Use appropriate hand tools; support the tub/basket to avoid displacement during removal/installation
• Follow OEM instructions for torque, alignment, and reassembly