Kfeg500esso Parts

The Range Bracket-Glass (White) is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Trim Vent is an OEM component specifically designed for Whirlpool ranges. Located at the rear of the unit above the oven cavity, the trim vent serves an important safety and ventilation purpose. 

Constructed of heat-resistant sheet metal with a powder-coated finish, the trim vent features an internal baffle system and a rear-mounted exhaust fan. This facilitates the proper drawing of hot oven air and fumes up and out of the kitchen area. 

This exhaust vent meets all codes regarding flame barrier rating and venting performance. It attaches securely to the framework at the top and back edges. 

Symptoms of a bad trim-vent include:

• Excessive heat and smoke escaping during use  
• Grease or residue buildup inside the vent pathway
• Misaligned vent body not flush or securely seated 

This OEM part fits KitchenAid, Jenn-Air, Amana and select GE range models.

Inner oven door glass that restores the viewing window and helps keep heat inside the oven. Replaces cracked, broken or fogged glass so you can safely check cooking progress without opening the door. What it does:

• Replaces damaged or cracked inner oven door glass to restore a safe viewing window.
• Helps contain oven heat and maintain normal cooking conditions by restoring the sealed door surface.
• Clears fogging or condensation between panes when the inner glass is the affected component.
• Improves visibility so you can monitor food without interrupting the cooking cycle.

• Disconnect power to the appliance and allow the oven to fully cool before beginning work.
• Handle glass carefully and wear cut-resistant gloves and eye protection; support the door on a flat surface if removal is required.
• Installation may require removing the oven door or inner door assembly and detaching clips or screws.

This anchor tip is a small snap-in retainer that secures spring or linkage components and helps keep moving parts aligned. It restores proper anchoring to reduce looseness, rubbing, and rattling for smoother operation. What it does:

• Secures a spring, clip or small linkage to its mounting point so parts stay in place
• Keeps moving components aligned to prevent binding or rubbing
• Helps eliminate rattles or noise caused by a dislodged retainer
• Provides a simple replacement for a damaged or worn plastic anchor

• Disconnect power to the appliance before starting any repair.
• Verify correct orientation and mounting location before snapping the anchor tip into place.
• Use needle-nose pliers for placement if needed; press gently until fully seated. Do not force or deform the part.
• If other components show wear or damage, inspect and replace as required for a complete repair.

This control bracket secures the appliance control or console assembly, keeping the control board and user interface stable for reliable operation. It helps prevent loose or misaligned controls that can affect button response or display visibility. What it does:

• Provides a rigid mounting surface for the control board or console assembly
• Keeps control components aligned and stable during normal use
• Helps reduce vibration-related connector or wire stress
• Can restore proper fit and button alignment when the panel is loose

• One control bracket

• Disconnect power to the appliance before starting any repair
• Handle the control board and wiring harness carefully to avoid damage
• Basic hand tools (screwdriver, nut driver) are typically required for removal/installation
• Reuse existing screws or verify hardware compatibility

This membrane-style control panel overlay replaces a worn or damaged touchpad so buttons respond properly and the appliance looks finished. It restores a clear, labeled surface for user input and protects the underlying switch assembly. What it does

• Provides the labeled, tactile surface for the appliance control buttons so inputs register correctly
• Replaces cracked, faded, or peeling overlays that make controls hard to read or use
• Protects the electronic switch/membrane beneath from spills and wear
• Helps restore normal control appearance and usability without replacing the entire control board

• High-level replacement: typically mounts over the existing control assembly; follow OEM disassembly steps
• Disconnect power (unplug or shut off breaker) before servicing to avoid shock or damage
• Handle carefully to avoid bending or contaminating the adhesive surface

This cooktop surface is the top panel that provides the smooth, finished cooking area and supports burners and controls. It restores the cooktop's appearance and functional mounting for heating elements. What it does:

• Replaces a damaged, cracked or heavily scratched cooktop surface to restore a flat, usable cooking area
• Provides the mounting surface and openings for heating elements/burner assemblies
• Helps maintain proper spacing and alignment for control and element components
• Prevents food and spills from reaching internal components when intact

• One cooktop surface/top panel

• Disconnect power before starting any repair; work on a cool cooktop
• Handle glass or finished surfaces carefully to avoid chips or cuts; use proper lifting support
• Installation may require loosening trim screws and disconnecting element assemblies—retain fasteners for reassembly

This left-side slide drawer replaces a worn or damaged refrigerator drawer slide to restore smooth, stable opening and reliable support for the drawer. Designed to match the OEM fit and function for compatible Whirlpool refrigerators. What it does:

• Guides and supports the left refrigerator drawer for even, smooth movement.
• Replaces bent, broken or worn left-side slide assemblies to stop sagging or sticking.
• Reduces rubbing, scraping or catching when opening and closing the drawer.
• Helps restore proper drawer alignment and prevents uneven wear on the drawer edge.

• Disconnect power to the appliance before beginning repairs and remove food/items from the drawer.
• Remove the old slide per the freezer/refrigerator drawer removal steps; retain fasteners if re-using.
• Align the new slide with mounting points and secure with recommended screws; avoid over-tightening.
• Test drawer movement and adjust alignment as needed; stop and reassess if binding occurs.

This spring clip is a small metal retainer used to secure wiring or small components in place, preventing movement and accidental disconnection. It helps maintain reliable electrical and mechanical connections inside the appliance. What it does:

• Holds wiring harnesses or small terminals securely to reduce chafing and intermittent connections
• Keeps connectors and small components from shifting during operation or transport
• Helps prevent wire strain that can cause shorts or loss of function
• Commonly replaced when clip is bent, broken, or missing and wiring becomes loose

• One spring clip

• Turn off power to the appliance at the breaker before inspecting or replacing
• Use needle-nose pliers to compress and seat the clip; avoid forcing or over-bending
• Verify the clip secures the intended wire or terminal without pinching insulation
• If wiring shows damage, replace the wiring/harness per OEM guidance rather than relying on the clip alone

This mounting bracket secures internal or external appliance components to the cabinet, restoring proper alignment and preventing vibration. It's a small but critical metal support used where fasteners attach panels or assemblies. What it does:

• Provides a secure attachment point for panels, controls, or assemblies
• Prevents loosening, rattling, and misalignment caused by broken or missing supports
• Restores proper fit and function when original bracket is bent, cracked, or missing
• Works as a direct replacement using existing fasteners and mounting holes

• Disconnect power (and gas if applicable) before beginning any repair
• Installation typically requires basic hand tools (screwdriver, nut driver, or socket)
• Retain or reuse original screws; verify bracket orientation before tightening
• If metal edges are sharp, use care and protective gloves to avoid cuts