Kffs20eyms Parts

Stops refrigerator fan rattling and buzzing noise. This rubber grommet cushions the fan motor to reduce vibration. Simple DIY fix, takes under 30 minutes.

Ice cubes jamming or hanging up in the ice maker? This stripper arm guides cubes off ejector fingers into the bin. Requires removing ice maker to install.

Replace your cracked, broken, or missing fresh ready bin. This small storage bin installs in the fresh-food compartment to organize snacks and produce.

Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.

Replace a cracked, broken, or missing crisper pan in your refrigerator. This produce bin installs in the fresh-food compartment under the cover.

This is a rubber gasket that seals the connection between the water fill tube and the ice maker assembly inside the freezer compartment. It prevents water from leaking around the fill tube during the ice maker's fill cycle. Replace this gasket if you notice water dripping or ice buildup around the fill tube area, or if water is leaking onto the freezer floor during ice production.

This refrigerator door shelf bin is the shallow-style rack that mounts to the inner door liner to hold smaller items. Replace a cracked or missing bin to restore secure, organized storage and keep condiments and jars from tipping.

• Holds and organizes smaller items on the refrigerator door
• Replaces bins that are cracked, broken, loose, or fall off the door
• Helps reduce spills and tipping when opening/closing the door
• Designed for the shallow bin positions on applicable models

• Lift the old bin up and out; align the new bin's hooks with the door rails and press down until fully seated
• Do not force onto the wrong mounting rails—shallow and deep bins may mount in different positions
• Handle plastic carefully; avoid installing when very cold to reduce risk of cracking

Replace cracked or missing compression fitting inserts for 1/4-inch water tubing in refrigerators and ice makers. Prevents leaks at connections.

This is a cover assembly that fits over the water dispenser area on the front of the refrigerator. It protects the internal dispenser components and provides a finished appearance on the exterior of the door. Replace this cover if it is cracked, broken, discolored, or if it no longer snaps securely into place.

Ice dropping throughout freezer? Replace your cracked or warped ice storage bin to prevent spills and jams. Direct-fit part keeps cubes contained.

This headless, cup-point set screw secures a component to a shaft or hub inside your appliance. The 1/4-28 x 3/8 in size bites into the mating surface to prevent slipping, helping keep collars, pulleys, or knobs aligned and stable.

• Locks a hub, collar, or pulley to a shaft to prevent movement
• Helps maintain alignment and reduce wobble or vibration
• Replaces missing, stripped, or damaged set screws
• Common signs include components slipping on a shaft, rattling noises, or recurring loosening

• Disconnect power before servicing
• Clean threads and align with any flat on the shaft before tightening
• Start threads by hand to avoid cross-threading; tighten securely without overtightening
• Recheck tightness after a brief test run

Black toe grille panel for bottom-mount refrigerators. Covers the base opening and leveling feet. Replace if cracked, broken, or clips are damaged.

Channels defrost water from the drain outlet to the pan. Replace if cracked, disconnected, or clogged to prevent water pooling inside or leaking onto floor.

Replace your refrigerator door gasket to restore a tight seal and prevent air leaks. Worn gaskets cause energy loss and temperature issues. Verify fit.

Protective seal grommet for hoses, tubes, or wires passing through refrigerator cabinet. Replaces cracked, worn, or missing grommets to prevent leaks.

Shields and positions the temperature sensor for accurate readings. Replace if cracked, broken, or missing to restore proper sensor placement and airflow.