Kfg306vss Parts

This is a door hinge used on a range or oven that connects the door to the oven frame and allows it to open and close smoothly. The hinge also supports the door's weight and helps it stay in position when open. Replace this hinge if the oven door is sagging, not closing evenly, feels loose, or will not stay shut.

Replacement dampened hinge for gas range oven doors. Controls door movement for smoother, quieter closing. Needed when hinge is broken, worn, or missing.

Replace a faulty top burner valve if your gas range burner won't light, flame is uneven, or gas flow is weak. Controls gas flow to each burner safely.

This hinge connects the oven door to the range body and allows the door to open, close, and stay in position. It uses a spring mechanism to control the door's movement and hold it partially or fully open. Replace this hinge if the oven door is sagging, not closing evenly, falling open, or if the door feels loose on one side.

Replacement mounting screw for securing panels, brackets, and internal components in ranges and ovens. Restores secure fastening when original screws are missing, stripped, or damaged.

Replace a faulty gas manifold if burners won't light or heat unevenly. This part routes gas from the supply line to each burner valve for safe operation.

Metal pivot assembly that supports and guides your range door for proper alignment and smooth operation. Replace when door sags or doesn't seal properly.

Weak or uneven flame? This burner orifice meters gas flow for proper flame size and consistent heat. Restores reliable ignition on gas ranges and cooktops.

Fixes uneven flames or incorrect burner output on your gas cooktop. This natural gas orifice restores proper gas flow to your 15,000 BTU burner. Direct-fit.

This frame-glass is the inner glass and supporting frame for the oven door, restoring a clear viewing area and a protective barrier between the oven cavity and the outer door. Replaces damaged or cracked inner door glass. What it does:

• Holds and secures the oven's inner glass panel in the door assembly.
• Provides a heat-resistant viewing surface so you can monitor cooking without opening the door.
• Prevents debris and grease from reaching the oven cavity between glass layers.
• Common symptoms: cracked or chipped inner glass, rattling or loose-feeling door, or visible separation/damage in the door glass.

• One frame-glass (inner oven door glass with supporting frame), as shown.

• Disconnect power to the appliance and allow the oven to fully cool before attempting service.
• Handle glass with heavy gloves and eye protection to avoid cuts from broken or sharp edges.
• Door removal or partial disassembly may be required; follow the OEM service manual or instructions for your model.

If your gas cooktop burners won't ignite or have uneven flames, the manifold may need replacement. This part distributes gas to each burner evenly.

This manifold assembly routes water through the dispenser and related valve connections so your refrigerator can deliver water and ice. Replacing a worn or cracked manifold restores proper water flow and helps prevent leaks. What it does:

• Directs water from the household supply to dispenser and ice-maker valve connections
• Restores proper flow when leaks, reduced flow, or no water at the dispenser occur
• Replaces cracked, damaged, or corroded manifold passages that cause leaks
• Works with existing valve and tubing connections to maintain a sealed water path

• One manifold assembly only

• Turn off water supply and unplug the appliance before starting
• Follow OEM diagram for correct orientation and secure all fittings and clamps
• Inspect and replace O-rings or tubing as needed to ensure leak-free seals
• After installation, restore water and power, then check carefully for leaks

Replace a cracked or broken burner connector on your gas range. This component links burner parts together and may need replacement if damaged or missing.

Control shaft for gas range knobs and selector switches. Replaces worn, stripped, or broken shafts that cause loose or difficult-to-turn controls.

This OEM part is a griddle cover made for stoves. A griddle cover is a metal piece that can be placed over the stove's burners to be used as a cooking surface. If a griddle cover becomes damaged due to excessive use, it can become ineffective and need to be replaced. Luckily replacing a griddle cover is a very simple process.To replace the griddle cover, make sure the stove is unplugged. Being by lifting the old cover out of its place by pushing it forward and lifting upward to release it from its attachment on the stove. Once removed set it off to the side. Next, proceed to take the new cover and place it back where the old one was while making sure it locks into its attachment. Once secured, turn the power back on to the appliance.This genuine replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand stoves.