Kfil27cxmso Parts

This slide tray is the removable drip tray that catches spills and condensation from the refrigerator dispenser, keeping the cabinet floor and shelf area clean and dry. It slides out for quick cleaning and maintenance. What it does:

• Collects drips and overflow from the water/ice dispenser to prevent puddles under the dispenser
• Slides outward for easy access when wiping up spills or removing debris
• Re-seats into the dispenser assembly to maintain proper alignment and coverage
• Helps reduce need for frequent cleanups and keeps the dispenser area sanitary

• Disconnect power and turn off the water supply before servicing dispenser components
• Remove old tray by sliding it out; align new tray and slide in until it clicks or seats firmly
• Use only gentle pressure—do not force or pry parts into place
• If tray doesn't seat correctly, check for obstructions or damaged mounting tabs before operating

This replacement screw secures panels, trim pieces and small assemblies so covers and components stay aligned and rattle-free. It's a simple, direct fastening part used when an original screw is missing or damaged. What it does:

• Fastens panels, trim, control housings and other small components to the appliance chassis
• Replaces missing, worn or stripped screws that cause loose panels or rattling noises
• Restores correct alignment of covers and trims after service or disassembly
• Provides a direct, hardware-level repair instead of temporary fixes

• Disconnect power (and gas, where applicable) and ensure the appliance is cool before starting.
• Use the correct screwdriver bit and turn until snug; do not overtighten to avoid stripping threads or damaging parts.
• Keep removed hardware for reference; replace like-for-like if threads or inserts are damaged.
• Wear eye protection and gloves when working on appliances.

This ice guide directs ice from the freezer ice maker or bin into the dispenser chute to keep cubes flowing and reduce jams. It restores proper alignment so the dispenser delivers ice cleanly to the cup or container. What it does:

• Guides ice from the ice maker/bin into the dispenser chute for smooth delivery
• Helps prevent ice from catching on the chute or falling off-center
• Reduces noisy or irregular dispensing caused by misaligned ice flow
• Works with the ice-maker/dispenser assembly to maintain consistent dispensing

• One ice guide

• Turn off ice/dispenser functions and unplug power before starting work
• Handle gently to avoid cracking the plastic guide; align tabs with mounting points before snapping into place
• No special tools typically required; refer to appliance manual for access steps
• If ice continues to jam after replacement, inspect ice maker, bin, and chute for ice buildup or other damage

This ice door support bracket holds and stabilizes the freezer ice door so it opens and closes smoothly and keeps the ice compartment sealed. Replaces a worn or broken support to restore proper door alignment and operation. What it does:

• Supports the ice door assembly to prevent drooping or misalignment
• Helps ensure the ice door opens and closes smoothly for reliable dispensing
• Reduces rattling or noise from a loose or damaged door support
• Prevents gaps that can lead to frost buildup or ice spillage

• Disconnect power to the appliance before starting any repair
• Remove the ice bin or door panel per service instructions to access the support
• Use common hand tools; handle plastic parts gently to avoid cracking
• Secure all fasteners; test door movement after installation

This upper freezer bin provides a roomy, secure shelf for organizing frozen foods and keeping items visible. It replaces a cracked or worn bin so the freezer door stores items safely and tidily. What it does

• Replaces a damaged or broken upper freezer storage bin to restore door storage
• Holds frozen foods and containers to prevent items falling or shifting
• Keeps freezer contents organized and visible for easier access
• Fits into the designated upper freezer door slot and supports normal use

• One upper freezer bin

• Remove frozen items and open the freezer door fully before replacing the bin
• Slide the old bin out gently and align the new bin with the door tracks until it clicks into place
• No special tools usually required; handle with care to avoid cracking the new plastic

This flat washer provides a firm, low-profile bearing surface for a fastener or shaft, helping distribute load and reduce wear on mating parts. It's a small replacement that restores proper spacing and secure assembly. What it does:

• Sits between a nut or bolt head and the mating surface to spread clamping force and prevent pull-through
• Helps maintain correct spacing and alignment of connected components
• Reduces friction and wear between rotating or tightened parts
• Can prevent loosening by protecting the mating surface from damage

• One flat washer

• Inspect mating surfaces and replace any damaged fasteners before reinstalling the washer
• Clean the area of debris or corrosion to ensure a flush fit
• Reuse fasteners only if they are undamaged; torque to the appliance manufacturer's specifications where available
• For electrical or safety-related repairs, disconnect power before starting work

Single

This drive coupling connects the washer motor to the transmission, transferring power to spin and agitate the tub. Replacing a worn coupling restores proper drivetrain engagement and reduces slipping, grinding, or loss of agitation. What it does:

• Transfers rotational force from the motor to the transmission so the washer can agitate and spin.
• Failsafe for worn motor-to-gearcase connection; a broken coupling commonly causes no-agitate or no-spin symptoms.
• Can produce burning smell, loud grinding, or slipping when deteriorated.
• Helps prevent further damage to the motor or transmission by isolating shock loads.

• Disconnect power and water before starting any repair.
• Basic disassembly of the washer cabinet and access to the motor/transmission area is required.
• Verify correct alignment of tabs/slots during installation to ensure proper engagement.

This Support is a replacement mounting bracket that stabilizes and secures appliance components for reliable operation. Restores proper fit and helps prevent movement or misalignment that can cause noise or part wear. What it does:

• Provides a secure mounting point for associated panels or components
• Helps keep moving parts aligned to reduce rubbing, vibration, or rattling
• Restores original fit when a worn or broken support causes looseness
• Suitable when a damaged bracket is visible or when parts shift out of place

• One Support

• Basic hand tools required; disconnect power and water before starting
• Inspect surrounding fasteners and replace any that are stripped or damaged
• Tighten to OEM torque if specified in manufacturer instructions; avoid over-tightening

This ice mold is the molded tray section that forms individual ice cubes in the refrigerator ice-making assembly, restoring proper cube shape and water containment for consistent ice production. What it does:

• Holds and shapes water into individual ice cubes as part of the ice maker assembly
• Directs water into cube cavities for even freezing and consistent cube size
• Replaces a cracked, warped or damaged mold that can cause leaks or misshapen cubes
• Helps stop water pooling inside the ice maker area when the mold is intact

• Disconnect power to the appliance and shut off the water supply before servicing
• Remove the ice maker assembly to access the mold; handle carefully to avoid damage
• Inspect mounting tabs and seals; replace any damaged fasteners or gaskets before reassembly