Kfp1333-4 Parts

This Motor Shaft Adapter fits over the drive post inside the work bowl to engage your food processor's blades and discs. Replacing a worn adapter restores secure coupling and smooth, consistent accessory rotation.

• Couples the motor drive post to blade and disc hubs
• Sets correct height/spacing for accessories in the bowl
• Helps prevent slipping, wobble, or uneven rotation
• Common symptoms: attachments not spinning, rattling/wobbling, uneven processing, or visible cracks/wear on the adapter

• Unplug the appliance before servicing
• Remove the work bowl and lid; lift off the old adapter if installed
• Align flats/splines and press the new adapter fully onto the drive post—do not force
• Reinstall the bowl and accessory; verify smooth engagement before use

This pusher fits into the feed tube to guide ingredients safely and engage the cover interlock. Replace a cracked or missing pusher to restore safe operation and smooth, controlled feeding during slicing or shredding.

• Guides food down the chute while keeping hands away from sharp blades/discs
• Completes the lid/bowl interlock so the motor runs only when properly assembled
• Helps maintain even, consistent feeding for better cutting results
• Common symptoms: unit won't start unless pressure is applied to the pusher, uneven feeding, or visible cracks/missing pusher

• Unplug the appliance before servicing
• Remove the lid and old pusher; clean the feed tube area
• Align and insert the new pusher without forcing; ensure it seats fully to engage the interlock
• Handle cutting blades and discs carefully—they are sharp

This pusher is a small molded actuator used in select Whirlpool appliances. It restores positive, reliable engagement between moving parts so the related mechanism operates smoothly and consistently after the original pusher becomes worn, cracked, or lost.

• Transfers motion to engage a lever, gate, or switch within the assembly
• Helps guide and align adjacent parts for smooth, consistent operation
• Reduces binding and misfeeds that can lead to jams or intermittent function
• Typical symptoms: mechanism won't activate, sticking or jamming, intermittent operation, visible damage to the original pusher

• Disconnect power (and water, if applicable) before servicing
• Access the assembly and note the original pusher's orientation; take a reference photo
• Release tabs or fasteners carefully to avoid cracking nearby plastic parts
• Seat the new pusher fully and verify free movement before reassembly

This adapter joins two mating components in your appliance to ensure the correct fit and alignment. Replacing a worn or damaged adapter helps restore stable operation, reduce vibration/noise, and prevent parts from loosening over time.

• Provides the proper interface between connected parts
• Maintains alignment for reliable performance
• Helps eliminate looseness that can cause rattling or intermittent operation
• Replaces cracked, stripped, or missing adapters to restore a secure fit

• Disconnect power and, if applicable, shut off water before servicing
• Note the orientation of the original adapter; take a photo for reference
• Inspect mating parts and seals; replace any damaged pieces as needed
• Hand-start fasteners and avoid overtightening; verify a snug, wobble-free fit

This bearing support keeps a rotating or sliding component aligned so the assembly moves smoothly and quietly. Replacing a worn support restores stable motion, reduces friction, and helps prevent noise and premature wear.

• Provides a low-friction support point for a mating shaft/arm
• Maintains alignment to prevent wobble, rubbing, or binding
• Helps the assembly operate smoothly and quietly
• Common failure signs: squeaking or grinding noises, rough/uneven movement, or excess play

• Disconnect power; shut off the water supply
• Access the assembly and note the original orientation before removal
• Transfer any clips, spacers, or screws from the old part as required by your model
• Do not add lubricants unless specified by the manufacturer; reassemble and test

This is the work bowl for a food processor. Replacing a worn or cracked bowl restores safe locking with the lid and base so blades/discs can operate properly and ingredients stay contained during processing.

• Contains ingredients during chopping, mixing, and slicing
• Locks to the base and interfaces with the lid/pusher to complete the safety interlock
• Guides the drive shaft for blades and discs
• Common fix for cracks, leaks, broken tabs/handle, or a processor that won't start because the bowl won't lock

• Disconnect power before servicing
• Remove the lid, pusher, and any blade/disc; lift off the old bowl
• Seat the new bowl on the base and twist to lock; then lock the lid/pusher to engage the interlock
• Wash and dry the new bowl before first use

This ball bearing replaces a worn washer or dryer bearing to restore smooth rotation and reduce grinding, rumbling or wobble during spin. A straightforward replacement part for noisy or binding drums or tubs. What it does:

• Supports the rotating tub/drum to ensure smooth, even spin
• Reduces loud rumbling, grinding or scraping noises caused by worn bearings
• Helps stop excessive vibration or drum wobble during operation
• Commonly replaced when the drum binds, drags, or turns unevenly

• Disconnect power (and water supply for washers) before beginning any repair
• Replacement requires partial disassembly of the cabinet/tub; support the drum/tub to avoid damage
• Bearings are typically pressed into place and require a puller/press or appropriate driver for safe removal/installation

This adapter connects the shredder shaft to the drive assembly, restoring proper transfer of rotation so the shredder/grinder section operates smoothly. It replaces a worn or damaged coupling to reduce slipping and binding. What it does:

• Couples the motor/drive to the shredder shaft so blades or grinder components turn reliably
• Restores normal shredding/grinding function when a worn adapter causes slippage
• Helps eliminate intermittent or complete loss of shredding action
• Prevents further damage from a loose or broken connection between drive and shaft

• Disconnect power to the appliance before beginning any service
• Inspect mating parts (shaft, splines, retaining hardware) and replace if worn or damaged
• Use proper tools and torque; secure fasteners per OEM guidance

This shaft adapter connects the appliance motor shaft to the slicing assembly so the slicer blade or accessory turns securely for consistent slicing performance. It restores proper engagement between the drive shaft and slicer attachment. What it does:

• Couples the motor drive shaft to the slicer blade/attachment so the blade rotates when the unit is switched on
• Ensures correct alignment and secure fit to reduce wobble or slipping during use
• Helps restore slicing function when the attachment will not engage or spin
• Fits the slicing assembly interface to transmit drive force from the motor

• Disconnect power before servicing to avoid injury
• Handle blades and slicing attachments carefully — use protective gloves
• Slide the adapter onto the drive shaft and align with the slicing assembly; ensure a snug, secure fit before use
• Test operation at low speed after installation to confirm proper engagement

Color: white. This attachment measures about 6 inches in diameter including the blades, and 4 inches high.

This electronic control board (switch panel) replaces the console PCB that controls user inputs and sends commands to the appliance. Restores responsive button/panel operation and proper control communication. What it does

• Receives button/touch inputs from the console and translates them into control signals
• Sends commands to appliance components (motors, valves, heaters) via the appliance control system
• Can resolve symptoms like unresponsive buttons, incorrect cycle selection, or display/control errors
• Helps restore normal control-panel behavior when the original PCB is faulty

• One electronic control board (switch panel) PCB assembly

• Disconnect power to the appliance before attempting any service
• Handle the board by its edges and avoid touching components; observe ESD precautions
• Remove the console or access panel as needed to access and replace the PCB; keep track of fasteners and connectors