Kgrs202bss1 Parts

A self-tapping screw used to secure appliance panels and components, providing reliable fastening to sheet metal and plastic parts. Replaces worn or missing fasteners to restore proper fit and reduce rattling. What it does:

• Fastens panels, brackets, or trim to appliance frames and housings
• Creates its own threads in sheet metal or plastic for a secure hold
• Helps stop loose panels, vibration noise, and misaligned parts
• Commonly used where a short, durable fastener is needed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or driver bit to avoid stripped heads
• Start threads carefully and avoid over-torquing to prevent damage
• Wear eye protection and gloves when working with sheet metal

This factory screw secures panels, brackets, or trim within your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces vibration and rattles, and helps keep components aligned for reliable, long-term performance.

• Fastens panels, brackets, or trim to the appliance cabinet/frame
• Replaces damaged, rusted, or missing hardware
• Helps eliminate vibration noises, gaps, and loose-fitting parts
• Supports proper alignment of adjoining components

• Disconnect power; turn off gas/water supplies where applicable.
• Match to the original screw from your model's parts diagram before installation.
• Start threads by hand to avoid cross-threading; use the correct driver bit for the head.
• Tighten snugly—do not overtighten to prevent stripping threads or cracking plastic bosses.

This wiring harness connects appliance controls and components to supply power and signals, restoring reliable electrical paths for normal operation. Designed to replace a damaged or worn harness to help resolve intermittent power or control failures. What it does:

• Routes power and signal connections between the control board and key components
• Replaces cracked, frayed, or corroded wires that cause intermittent operation or no power to parts
• Helps stop shorts or blown fuses caused by damaged wiring
• Restores factory wiring layout for correct component communication

• Disconnect power before inspecting or replacing the harness to avoid shock or damage
• Verify connector orientations and secure all crimps or terminals; ensure proper strain relief
• Check for pin corrosion or bent terminals and replace harness if connectors are damaged

This fitting is a small connector that joins or secures a fluid line inside the appliance, helping restore a safe, leak-free connection so water or other fluids flow where needed without escaping. What it does:

• Connects or secures a hose or tubing to an internal port so fluid can flow properly
• Helps stop leaks caused by cracked, loose, or worn fittings
• Restores a proper sealed connection when the original fitting is damaged or missing
• Works as a replacement plumbing connector used in common appliance water lines

• Fitting

• Turn off power to the appliance and shut off the water supply before starting
• Remove any retaining clips or clamps and replace the old fitting with the new one, ensuring a snug fit
• Use only the correct clamps or seals for your appliance; tighten to manufacturer guidance without over-torquing
• After installation, restore water and power, then check thoroughly for leaks during a test cycle

Color: Stainless

This rail base provides the structural support for the refrigerator drawer/rail assembly, restoring smooth drawer alignment and preventing sagging or binding. It's a direct-fit replacement that helps maintain proper drawer operation and cabinet fit. What it does:

• Supports and aligns the drawer/rail assembly so drawers slide smoothly
• Secures the lower rail to the cabinet to prevent shifting or sagging
• Restores proper drawer clearance and prevents sticking or uneven movement
• Addresses symptoms like crooked or loose drawers, binding, or gaps at the drawer edge

• One rail base

• Disconnect power to the appliance before beginning work
• Remove drawer(s) and any trim panels to access the rail area
• Use basic hand tools; avoid overtightening fasteners to prevent damage

Color: White. Size: 13 oz. Spray paint primer. can.

This is a genuine replacement screw used to secure appliance components. It provides a simple, reliable fastener for reattaching panels, brackets, or assemblies so parts stay properly mounted and stable during operation. What it does

• Secures panels, trim, brackets or small assemblies in place
• Restores proper fastening where a missing or damaged screw causes loose parts or rattling
• Prevents movement that can lead to noise or misalignment of adjacent components
• Used wherever the original screw was removed or lost during repairs

• One replacement screw

• Use the matching screw head and thread engagement; do not force if it does not seat smoothly
• Tighten until snug—avoid overtightening to prevent stripping or cracking plastic parts
• Disconnect power before working on electrical appliances and follow basic safety precautions
• If original screw was rusted, check mating threads for damage before installing new fastener

This 18-inch supply power cord delivers a reliable electrical connection to restore appliance power and safe operation. It replaces a damaged or missing cord so the unit can receive power from the wall outlet. What it does:

• Provides the main AC connection between the appliance and household power
• Replaces frayed, melted, or broken cords that cause intermittent power or no power
• Restores secure plug and strain-relief connection to reduce arcing and overheating risks
• Matches factory-style terminal ends for a direct fit when compatible

• One 18-inch supply power cord

• Disconnect power at the breaker or unplug the appliance before starting
• Inspect terminals and cord routing; secure with the factory strain relief
• Tighten terminal connections firmly but do not overtighten; confirm proper insulation

This orifice holder assembly secures the burner orifice and helps direct gas flow to the burner for reliable ignition and steady flames. Replacing a worn or damaged holder restores proper burner operation and consistent heat. What it does:

• Holds the burner orifice in the correct position for proper gas flow
• Helps maintain consistent flame size and burner performance
• Can resolve symptoms like weak or uneven flames and difficulty lighting
• Works with the burner and valve to ensure safer, more reliable ignition

• Turn off the gas supply and electrical power before starting any work
• Inspect surrounding gaskets and fittings; replace any damaged seals
• Hand-start threads, then tighten to manufacturer torque; avoid overtightening

This door trim is the front-facing decorative bezel that restores the finish and edge protection to your appliance door. It replaces a worn, cracked, or damaged trim to improve appearance and help seal the door edge. What it does

• Replaces damaged or cracked door bezel to restore appearance
• Covers and protects the door edge from impacts and wear
• Helps maintain a clean seal line by securing the door edge trim
• Common symptom: visible cracks, chips, or loose trim along the door perimeter

• One door trim piece as shown

• Disconnect power to the appliance before beginning any service
• Use appropriate tools and keep fasteners for reassembly; handle trim carefully to avoid damage

This orifice holder assembly secures the burner orifice to the burner tube and helps direct gas flow for stable ignition and flame. It's a direct-fit replacement that restores proper burner alignment and operation. What it does:

• Holds the gas orifice in place at the burner for correct gas delivery
• Helps maintain a consistent flame for even heating
• Can resolve symptoms such as burners that won't light or poor/uneven flames
• Works with the burner tube and associated gas valve assembly to ensure proper operation

• One orifice holder assembly

• Turn off the appliance and shut off the gas supply before beginning work
• Use appropriate tools and avoid overtightening fasteners to prevent damage
• Inspect nearby gaskets and fittings; replace any damaged parts for a proper seal

This broil burner assembly supplies the focused heat for the oven's broiling function so you can brown and crisp foods quickly. It replaces a worn or damaged broil burner to restore proper broil performance. What it does:

• Directs and emits the high, concentrated flame used during oven broiling.
• Restores even browning and searing when the broil function produces weak or spotty heat.
• Addresses issues such as little/no broil flame or uneven broiling when burner damage or clogging is present.
• Works with the oven's gas supply and ignition system to produce consistent broil heat.

• One broil burner assembly

• Turn off and disconnect gas supply and electrical power before attempting service.
• Follow OEM service manual or parts diagram for correct alignment and secure mounting.
• Use proper tools; verify gas connections are leak-free and ignition lights properly before use.

This support bracket secures internal components to the appliance chassis, restoring proper alignment and stability for attached parts. It's a simple replacement that helps stop rattling and prevents components from shifting during use. What it does:

• Provides a secure mounting point to hold panels, assemblies or components in place
• Helps eliminate vibration or rattling caused by a loose or broken bracket
• Restores proper alignment so connected parts operate correctly
• Prevents further wear or damage from loose components

• Disconnect power to the appliance before starting any repair
• Basic hand tools (screwdriver, nut driver) are typically required
• Keep original fasteners and note their location for reassembly; replace damaged hardware as needed

Color: Stainless

This replacement drawer front restores the appearance and function of the lower storage drawer on compatible gas ranges. It provides a finished exterior surface and helps the drawer open, close, and align properly. What it does

• Replaces a cracked, dented, scratched or damaged drawer front to improve appearance
• Restores proper drawer alignment so the drawer slides and closes smoothly
• Covers and protects the drawer's front edge and mounting hardware
• Matches the original part form to maintain fit and function

• One drawer front

• Remove the drawer assembly and mounting screws to swap the front; keep original screws and brackets unless replacements are specified
• Align the drawer front before fastening screws to ensure even gaps and smooth operation
• Use basic hand tools; avoid overtightening fasteners which can crack the panel