Kgrs303bss Parts

This replacement drawer front restores the appearance and function of the lower storage drawer on compatible gas ranges. It provides a finished exterior surface and helps the drawer open, close, and align properly. What it does

• Replaces a cracked, dented, scratched or damaged drawer front to improve appearance
• Restores proper drawer alignment so the drawer slides and closes smoothly
• Covers and protects the drawer's front edge and mounting hardware
• Matches the original part form to maintain fit and function

• One drawer front

• Remove the drawer assembly and mounting screws to swap the front; keep original screws and brackets unless replacements are specified
• Align the drawer front before fastening screws to ensure even gaps and smooth operation
• Use basic hand tools; avoid overtightening fasteners which can crack the panel

This is a direct-replacement screw used to secure appliance panels, brackets and other small components. It restores proper fastening where the original screw is missing, stripped, or corroded to help reduce rattles and looseness. What it does

• Fastens panels, trim, brackets and similar small appliance parts
• Restores a secure connection when the original fastener is missing or damaged
• Helps stop vibration-related rattling and movement of mounted components
• Matches the original mounting point to maintain proper alignment

• Disconnect power and water before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to the mating part
• Replace only with the same part number or equivalent for proper fit

This burner baffle is a replacement heat shield that protects the range cooktop and burner assembly from spills and directs heat for more consistent cooking. Durable design helps keep burner components cleaner and working properly. What it does:

• Shields burner components from drips, spills, and food debris that can cause clogging or uneven flame
• Helps channel heat from the burner for more consistent surface heating
• Reduces direct exposure of internal parts to corrosive residues, extending component life
• Can stop rattling or misalignment caused by a damaged or bent baffle

• Disconnect gas supply and electrical power and allow the range to cool fully before servicing
• Handle edges carefully; baffle may have sharp metal edges or be spring-tensioned into place
• Installation typically requires removing grates and lift-off parts to access the burner area; follow OEM instructions

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation

Color: Black   Note: Left side endcap

Color: Black   Note: Right side endcap

This split oven rack assembly replaces a worn or damaged oven rack to restore proper cooking surface support and rack movement. Durable construction lets you position cookware securely and helps maintain even heating in the oven cavity. What it does:

• Provides a stable surface for pots, pans and bakeware inside the oven
• Replaces bent, rusted or missing rack sections that prevent smooth sliding
• Restores correct rack alignment and prevents cookware from tipping
• Helps return oven usability for baking, roasting and broiling tasks

• One split oven rack assembly

• Inspect oven interior and mounting rails for debris before installing
• Slide the assembly into the oven rack supports until fully seated; avoid forcing
• Use gloves to protect hands from sharp edges and oven grime

The convection fan is an OEM component for Whirlpool ranges. It functions as the convection fan system, circulating hot air within the oven cavity to provide efficient all-around heating. 

The convection fan is responsible for proper air circulation and temperature distribution during convection bake and roast cycles. It allows for fast, even cooking on multiple racks simultaneously.

Symptoms of a bad convection fan include:

• Inefficient or uneven baking/cooking results  
• Longer than normal cook times
• Overheating or hot spots within the oven
• Strange noises coming from the convection fan area

Causes can include a failed motor, worn fan blades, or blockages that disrupt airflow.

This Whirlpool OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ranges.

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

The Range Bracket-Glass (White) is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Orifice Holder is an OEM part for Whirlpool ranges. This part secures the orifice through which gas flows into the range cooktop and oven burners.

Causes may include natural wear, cracks or damage incurred over years of use. Gas leaks are also a risk if the holder fails.

Symptoms of a bad orifice holder can manifest as:

• Unpredictable or intermittent burner ignition
• Flames that appear abnormally tall, yellow or noisy
• Cooktop that heats unevenly or inadequately

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The HOLDER-ORFICE is an OEM component specifically designed for Whirlpool brand gas ranges and cooktops. It serves as the mounting bracket that secures the gas orifice fitting in the proper position. Correct orifice placement is critical for targeted gas flow and optimal flame adjustment.

Symptoms of a bad holder-orifice include: 

• Flames that cannot be properly adjusted and controlled from high to low 
• Potential safety hazards such as gas leaks due to a loose fitting
• Inefficient or uneven heating from erratic gas flow issues

Causes of failure include normal wear over time exposed to heat and vibration, or damage from accidental impact that warps the holder.

This OEM Whirlpool replacement ensures the orifice fitting remains firmly in position. Compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, and select Kenmore models. Replace your holder orifice today for safe, dependable gas range functionality.

The Insulation is an OEM part for Whirlpool ranges. It serves as the heat-resistant fiberglass insulation installed inside oven cavity walls and behind backsplash panels. 

Symptoms of damaged or degraded insulation could include:

• Uneven or inefficient heat distribution inside the oven 
• Hot and cold spots developing on bake elements over time
• Longer preheat periods are needed to reach target temperatures
• Higher energy costs from overworked heating components  

Causes may involve breaks in insulation fibers from extended heat cycling. Exposure to moisture or condensation could compromise insulation integrity as well. Physical punctures may develop from accidental impact or installing range components.

This replacement insulation works for Jenn-Air, KitchenAid, and select Kenmore oven ranges too. 

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.