Kmhc319ess-3 Parts

The Control Board is an OEM component specifically designed for Whirlpool microwaves. It works behind the scenes to operate and control all microwave functions through its built-in computer chip and electronic components. 

The control board allows for accurate monitoring and control of cooking times and power levels through its programming. It facilitates the user interface and relays instructions from the buttons and display to the microwave's internal mechanisms.

Symptoms of a bad control board can include: 

• Microwave not heating or heating unevenly  
• Display/buttons malfunctioning or non-responsive
• Unexpected beeping or noise issues
• Inability to start or stop cooking functions

Causes of a bad control board are usually due to normal wear and tear over time. Occasionally, damage can occur from moisture exposure, power surges, or physical trauma.

This OEM Whirlpool replacement part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and select Kenmore microwaves.

This electronic control board is the main console module that manages your appliance's cycles, settings and display so controls respond correctly and programs run as selected. Replacing a faulty board restores normal control operation. What it does:

• Controls cycle selection, timing, and start/stop functions for the appliance
• Manages the user interface and display so buttons and indicators respond
• Communicates with other modules to run selected programs and safety checks
• Common symptom link: appliance won't start, display is blank or shows errors
• Common symptom link: buttons or touch controls don't respond or cycles won't advance

• One electronic control board (console module)

• Disconnect power before starting any service work to avoid shock
• Handle the board by edges and avoid touching components or contacts
• Verify all wiring harnesses and connectors seat fully before reassembly

This vent grille covers the top-front exhaust opening on a microwave, helping direct airflow and restoring a clean, finished look. Replace a cracked or missing grille to keep ventilation unobstructed and the assembly secure. What it does:

• Covers and protects the upper ventilation opening
• Helps channel exhaust or recirculated air out of the unit
• Restores secure attachment when tabs or screw bosses are damaged
• Common symptoms: cracked or broken grille, loose fit, rattling, missing or visibly worn trim

• 1 vent grille

• Disconnect power to the microwave before servicing
• Remove the top-front mounting screws and slide out the old grille
• Position the new grille and reinstall the screws; do not overtighten
• Ensure the grille is fully seated and secure before restoring power

The Microwave Handle Spacer is an OEM component designed for Whirlpool brand countertop microwaves. This plastic spacer fits between the door handle and outer case to provide structure and proper spacing. 

Symptoms of a bad spacer include: 

• Loose or misaligned door handle  
• Excessive play or movement of the handle when opening/closing the door
• Noise or rattling coming from the door handle area
• Damage or wear visible on the spacer itself

Causes can be regular use over time breaking down the integrity of the spacer material, or impact injury compromising its form and function.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Support Bracket (WHT) is an OEM part for Whirlpool over-the-range microwaves. It serves as a mounting bracket to securely install the microwave in its space above the cooktop. 

Causes of a bad Support Bracket (WHT) can include cracks or breaks over many years holding the weight of the microwave. Vibrations from cooking below may also weaken or damage its structural integrity.

Symptoms of a bad bracket support include: 

• An unstable or insecure microwave installation
• Inability to properly level or adjust height 
• Possible injury concerns if the microwave dislodges

This genuine Whirlpool replacement is compatible with additional brands such as Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well.

This replacement panel restores the original look and fit of your appliance. It serves as the protective exterior cover and mounting surface for related controls or trim, helping keep internal components secure and out of sight.

• Provides the exterior cover for a specific appliance section
• Protects internal wiring and components from dust and accidental contact
• Offers mounting points for controls, display, or decorative trim
• Replace if cracked, warped, loose, or missing/broken tabs

• Disconnect power before servicing and allow any hot surfaces to cool
• Keep track of fasteners; support attached wiring/controls while transferring parts
• Move electrical connectors one at a time; avoid pulling on wires
• Do not overtighten screws to prevent cracking or distortion

This wire harness routes power and signals between key components for consistent performance. Replacing a damaged harness restores reliable connections and correct operation of affected controls, motors, or sensors.

• Distributes electrical power and control signals between boards, switches, sensors, and motors
• Replaces cut, brittle, burned, or corroded wires and terminals that cause connection faults
• Common symptoms include intermittent operation, a component that won't run, or error codes related to poor connections
• Restores proper wire routing when installed in the factory path and secured with clips/ties

• Disconnect power before servicing; turn off water or gas supply if applicable
• Photograph and label existing connections; move plugs one at a time to the new harness
• Route along the original path; secure in clips/ties and keep clear of sharp, hot, or moving parts
• Seat each connector fully by the plug body (do not pull on wires); inspect mating terminals for heat damage

This motor cover shields the motor assembly and nearby components from debris and accidental contact. Replacing a cracked or missing cover restores proper protection and can reduce noise caused by objects rubbing against moving parts.

• Covers the motor area to block dust, grease, and foreign objects
• Helps secure the motor housing and maintain proper clearances
• Can quiet rattling or scraping caused by a loose or broken cover
• Common signs: cracked, warped, or missing cover; scraping/rattling from the motor area; visible motor exposure

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the motor compartment per your model's service/installation information
• Retain and reuse the original screws/fasteners unless damaged
• Do not overtighten fasteners to avoid cracking the new cover; verify clearances before testing

This grill vent replaces the front vent trim that directs airflow from the oven cavity to the outside. Restores proper venting and helps maintain even cooking and safe appliance operation. What it does:

• Directs hot air and steam out of the oven cavity during operation
• Helps maintain consistent internal oven temperature for better cooking results
• Prevents exhaust from entering the control/console area
• Can reduce cooking odors and excessive heat buildup near the control panel

• Remove power to the appliance before servicing to avoid electrical shock
• Typical installation requires removing the oven door or control panel for access—follow the OEM service instructions
• Use proper tools and handle trim pieces carefully to avoid scratching finishes
• If corrosion or additional damage is present, inspect surrounding components and replace as needed

Color: Black

This CONTROL BOARD is an OEM part designed specifically for Whirlpool microwaves. Serving as a vital component, the control board governs various functions within the microwave, including timer settings, power levels, and operational modes. Its precise design ensures compatibility and seamless integration within the appliance.

A malfunctioning control board can significantly disrupt the microwave's performance. Causes of a faulty control board may include electrical issues, component failure, or damage due to power surges, or water damage.

Symptoms of a bad CONTROL BOARD may include:

• Inoperable buttons or unresponsive control panel
• Inaccurate or erratic timer or display readings
• Failure to start, complete, or control cooking cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

This genuine replacement door handle restores a secure grip and normal door operation on compatible Whirlpool refrigerators, making it easier to open and close the door and improving the appliance's appearance. What it does:

• Replaces a cracked, broken, loose, or worn refrigerator door handle
• Provides a stable grip so the door opens and closes smoothly
• Helps maintain proper door alignment and sealing when attached correctly
• Restores the cabinet finish where the original handle was damaged or missing

• Installation requires removing the old handle and securing the replacement with the existing screws or clips; follow manufacturer instructions.
• Keep the appliance unplugged or power to the dispenser/ice controls off if handle removal affects electrical components.
• Handle with care to avoid scratching finished surfaces; use a soft cloth when handling and aligning.
• Replace fasteners with OEM-specified hardware for a secure fit.

This inner oven door glass replaces a cracked or cloudy panel to restore visibility and maintain the oven door seal. It fits the oven door assembly and provides a clear viewing area for safe cooking monitoring. What it does:

• Replaces damaged or shattered inner oven door glass to restore safe, clear viewing.
• Helps maintain proper heat containment by restoring the door's glass panel.
• Reduces heat loss and prevents loose glass fragments from entering the oven cavity.
• Commonly used when glass is cracked, chipped, fogged, or compromised after impacts.

• High-level replacement only; refer to your oven's service manual for step-by-step disassembly and reassembly.
• Disconnect power to the appliance before beginning any repairs to avoid shock or injury.
• Handle glass with gloves and eye protection; support the door assembly to prevent falls or damage.
• If clips, gaskets, or fasteners appear damaged during removal, replace them per the OEM parts list.

Color: Stainless 
 

This evaporator fan motor circulates cold air through the freezer and refrigerator compartments to maintain even temperatures and consistent cooling. Replaces a failed or noisy motor to help restore airflow and temperature stability. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator and into the cabinet.
• Helps prevent warm spots and uneven cooling when operating correctly.
• Commonly replaced for noisy operation, failure to run, or intermittent airflow.
• Compatible with refrigerators that use this OEM-style fan motor design.

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing interior panels or the evaporator cover; keep screws and fasteners organized.
• Inspect the fan blade and housing for ice buildup or obstructions before installing the new motor.

Color: White