Kp26m1xqg Parts

The Planetary is an OEM part for Whirlpool stand mixers. This part holds the beater and ensures it rotates around the bowl to mix ingredients thoroughly. The planetary mechanism allows for consistent and even mixing by moving the beater in a planetary motion, which covers the entire bowl.

Causes of a bad planetary can include regular wear and tear, heavy use, or mechanical failure within the gears.

Symptoms of a bad planetary include:

• Beater not rotating properly
• Unusual noises during operation
• The mixer head wobbling or shaking
• Inconsistent mixing results

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Power Cord is an OEM part for Whirlpool mixers. It provides the necessary electrical connection between your mixer and the power source, enabling your mixer to run reliably and safely.

Symptoms of a faulty power cord include:

• Intermittent power loss
• Exposed or frayed wires
• Loose connection or difficulty in maintaining power

A bad power cord can occur due to wear and tear, accidental damage, or electrical issues. If you experience problems such as intermittent power loss, exposed wires, or a loose connection, it may be time to replace the power cord.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This silver Planetary assembly is the lower drive unit of a stand mixer that carries the beater shaft. Replacing a worn or loose planetary restores smooth, consistent planetary motion and reliable attachment rotation for dependable mixing performance.

• Transfers motor power to the beater and creates true planetary mixing action
• Houses the beater shaft and interfaces with the lower gear train
• Helps maintain stable beater-to-bowl alignment at the bottom of the mixer head
• Typical failure symptoms: beater not turning or stalling, grinding/clicking from the lower head, or noticeable wobble/excess play in the planetary

• Unplug the mixer and remove the bowl and beater before service
• Drive out the roll pin to remove the old planetary; transfer and reuse any model-specific hardware
• Clean and re-grease gears with food-grade mixer grease during reassembly, if needed
• Reinstall the planetary and pin; verify beater-to-bowl clearance per the owner's manual before use

This lower gearcase housing encloses and supports the planetary and lower gear train in a stand mixer. Replacing a damaged housing restores alignment and helps contain lubrication for quieter, consistent mixing performance.

• Houses the lower gear train and planetary shaft to maintain alignment
• Provides a sealed cavity to help retain grease around gears
• Replaces cracked, stripped, or warped housings that cause wobble or noise
• Helpful when you see grease seepage or cosmetic damage to the lower case

• Unplug the mixer and remove bowl and attachments before service
• Open the motor head and remove the planetary/gear stack as required
• Transfer components to the new housing; renew food-grade mixer grease if servicing gears
• Reassemble and verify beater-to-bowl clearance and smooth operation

This factory mounting screw secures components in place inside compatible appliances, helping maintain proper alignment and reliable operation.

• Fastens panels, brackets, or internal parts to prevent shifting and vibration
• Common fix when a panel or bracket is loose or rattling
• Resolve issues like gaps, misalignment, or buzzing from loose hardware

• Unplug power and shut off utilities before servicing
• Retain and reuse original hardware and clips where applicable
• Start threads by hand to avoid cross-threading, then tighten snugly without over-torquing

The Rotating Handle is an OEM part for Whirlpool mixers. It allows you to raise and lower the mixing bowl for convenient access during the mixing process.

A bad rotating handle can be caused by regular use, accidental damage, or excessive force applied during operation. If you notice cracks, a loose or wobbly fit, or difficulty in rotating the handle smoothly, it may indicate a problem with the handle itself.

Symptoms of a bad rotating handle include:

• Cracked or damaged handle surface
• Loose or insecure fit of the handle on the mixer
• Inability to raise or lower the mixing bowl 

Replace your faulty handle with this genuine OEM part to restore your mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Restore your stand mixer's drive system with this gearcase. It serves as the transmission, routing motor power to the planetary while enclosing and supporting the gears for smooth, consistent mixing performance. What it does:

• Directs motor power through the gear train to the planetary/attachment hub
• Encloses, supports, and aligns the gears; retains transmission grease
• Helps address grinding/rumbling, grease leaking from the mixer head, weak or stalled planetary, or excessive vibration

• 1 gearcase

• Unplug the mixer; remove bowl and attachments; protect the work area from grease
• Remove the motor head cover and fasteners; separate the case and note gear stack orientation
• Transfer gears/seals as needed and repack with food-grade grease if servicing the gear train
• Reassemble, tightening screws evenly; test at low speed before normal use

Color: Blue Steel

This gearcase is the main transmission assembly that transfers motor torque to the washer's tub and agitator, restoring normal agitation and spin performance when the original gearcase fails. What it does

• Converts motor rotation into the gear reductions needed for agitation and spin cycles.
• Commonly replaced for symptoms like no agitation, slow or failed spin, grinding or clunking noises during cycles.
• Contains internal gears and bearings that can wear or break, causing irregular movement or loss of drive.
• Works with the washer's motor coupling and drive components to re-establish reliable drum motion.

• One gearcase (transmission) assembly.

• Disconnect power and water supply before beginning any repair.
• Support the washer cabinet and tub when removing the old gearcase to avoid damage or injury.
• Gearcase assemblies are heavy and contain grease—expect some lubricant exposure; clean hands and work surfaces after installation.
• Use model-specific service manual or exploded parts diagram for proper alignment and reassembly; replacement may require transfer of seals or mounting hardware.

This threaded nut is a genuine fastener used to secure appliance components and restore proper attachment. It replaces worn or missing hardware to stop loose parts and help the appliance function safely. What it does:

• Secures panels, brackets, and assemblies to prevent rattling or movement
• Restores proper thread engagement for stable mechanical connections
• Prevents components from working loose during operation
• Useful when replacing stripped or missing nuts that cause vibration or misalignment

• Disconnect power to the appliance before beginning any repair
• Match nut thread size and type to the mating bolt or stud before installation
• Tighten with the correct socket or wrench; avoid over-tightening which can strip threads
• Replace any damaged mating hardware for a secure fit

A replacement trim band that restores the finished edge around the appliance door or front frame for a clean, factory appearance. Helps protect the cabinet edge and keeps the panel aligned for smooth operation. What it does:

• Covers and finishes the door or front-frame edge to restore original appearance
• Helps hold the panel trim in place and prevents gaps or rubbing at the edge
• Reduces the chance of snags on clothing or items near the door opening
• Useful when trim is cracked, bent, or cosmetically damaged

• Disconnect power to the appliance before beginning any work
• Remove the outer panel or door trim per the service manual to access the trim band
• Replace the band carefully to avoid damaging adjacent trim or painted surfaces
• Use appropriate hand tools and follow OEM instructions

This Support (mounting bracket) secures internal components to the appliance cabinet so parts stay aligned and operate quietly. It replaces a worn or broken support to restore stable mounting and reduce noise or movement. What it does

• Holds and stabilizes panels, assemblies or internal components to maintain correct alignment
• Prevents rubbing, vibration or shifting that can cause noise or part wear
• Helps keep connected components in their intended position for reliable operation
• Commonly replaced when cracked, broken or missing after impacts or during maintenance

• One Support (mounting bracket)

• Recommended for installers or those comfortable with appliance repair; disconnect power before service
• Inspect surrounding fasteners and mating surfaces; replace any damaged screws or clips
• Use only parts and hardware specified for your model to ensure proper fit and function

This planetary gear assembly transmits motor torque through the gearbox to drive the agitator/spindle, restoring proper mechanical drive and restoring wash/spin function. It's a direct-replacement gearbox component used in drive systems. What it does

• Transfers rotational force from the motor to the transmission/agitator for normal wash and spin cycles
• Replaces worn or damaged gears that cause noisy operation, slipping, grinding or loss of drive
• Restores consistent drive engagement and reduces abnormal vibration or jerking during cycles
• Works as part of the transmission/gearbox to maintain proper washer drivetrain operation

• One planetary gear assembly

• Disconnect power and water supply before starting
• Inspect mating gears, seals and bearings for wear and replace as needed to prevent premature failure
• Use OEM fasteners and alignment procedures from the service manual for correct fit and function
• Test a complete cycle after installation to confirm normal drive operation and quiet performance

This coated dough hook replaces a worn or damaged mixer hook to knead and fold dough more cleanly. The coated surface helps reduce sticking and protects dough from bare metal contact for smoother mixing. What it does

• Kneads and folds dough to develop gluten and form a uniform dough mass.
• Coated surface helps prevent dough from sticking and makes cleanup easier.
• Narrow profile fits mixers designed for a slim hook — use when the original hook is bent, broken, or missing.
• Use when dough mixes unevenly, the hook no longer grips dough, or coating is chipped or worn.

• Always unplug the mixer before removing or installing parts.
• Align the hook with the mixer hub and engage per the owner's manual; do not force parts.
• Hand-wash and dry thoroughly; avoid abrasive cleaners or scouring pads to protect the coating.