Krfc302eess Parts

Reduces heat transfer in your refrigerator cabinet for efficient cooling and less frost buildup. Replace if damaged or deteriorated. Verify fit by model.

The Icemaker Fill Cup Sensor is an OEM part for Whirlpool bottom-mount and side-by-side refrigerators. Located inside the icemaker assembly, the fill cup sensor works to automatically detect when an ice scoop or bucket is in place below the icemaker chute. It signals the icemaker to drop ice cubes into the receptacle below.

Causes of a bad fill cup sensor can include mineral or dirt build-up inhibiting sensor response, moisture damage to its electronic functioning, or physical damage to the sensor head.

Symptoms of a bad fill cup sensor include:

• Ice failing to dispense or drop when a container is in place
• Ice clumping in the chute instead of dispensing properly  
• The icemaker continuing to run even with ice present below
• Inability to sense when ice is removed from the bucket

This OEM Whirlpool replacement fill cup sensor is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore bottom-mount and side-by-side refrigerators. 

This produce preserver is a small cartridge or packet designed to absorb ethylene gas inside your refrigerator's crisper drawer. By neutralizing ethylene, it helps fruits and vegetables stay fresh longer. Replace it if your produce seems to spoil or wilt faster than expected, even when stored at the correct temperature and humidity settings.

Door hinge hardware for bottom-mount refrigerators. Installs on cabinet to support door swing. Replace if hinge is cracked, bent, or damaged.

This defrost heater assembly mounts near the evaporator coils inside the freezer section of a refrigerator. It generates heat during the defrost cycle to melt frost and ice buildup on the evaporator, allowing the cooling system to operate efficiently. Replace this part if you notice excessive frost buildup in the freezer, the refrigerator is not cooling properly, or the defrost cycle is no longer functioning.

Ice spilling from bin or dispenser not working? This ice bin front panel replaces cracked or damaged fronts to contain ice and restore proper feeding.

This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:

• Holds the evaporator coil/assembly or associated covers in place
• Prevents vibration, noise, and contact between the coil and cabinet parts
• Helps maintain consistent airflow for reliable cooling performance
• Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator

• Disconnect power before servicing the appliance
• Handle evaporator and surrounding fins carefully; they are sharp and fragile
• Verify clip orientation against the OEM diagram before fastening

This is a water supply line that connects to the refrigerator's dispenser system, routing water from the internal plumbing to the dispensing mechanism. It ensures a steady flow of water for the water dispenser and may also support ice maker function. Replace this line if you notice leaking behind or under the dispenser area, reduced water flow, or water dripping from the dispenser chute.

Door hinge for bottom-mount refrigerators. Installs at the top or bottom of the door to support proper alignment. Replace if cracked or worn.

Secures components inside your refrigerator. Replace this retainer strap if the original is cracked, broken, or missing to properly hold parts in place.

Top left door hinge assembly for bottom-mount refrigerators. Secures the upper refrigerator door to the cabinet. Replace if cracked, broken, or worn.

This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does

• Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
• Helps isolate vibrating components from appliance chassis to lower perceived sound.
• Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
• Useful when worn, detached or hardened factory pads allow increased noise.

• One insul-sound deadening pad

• Disconnect power before servicing an appliance to avoid shock or injury.
• Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
• Replace only in the original location; do not cover vents or moving parts.
• If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.

Mounting screw for refrigerator assembly. Secures internal components and panels. Replace if stripped, missing, or damaged during repairs or maintenance.

Right-side refrigerator door panel in stainless finish. Replaces cracked, dented, or discolored doors on bottom-mount refrigerators. Exterior panel.