Krfc704fss-01 Parts

This door hinge is a direct-fit replacement that helps the refrigerator door open and close smoothly and keeps the door aligned to seal properly. Restores proper door movement and helps prevent gaps that can cause cooling loss. What it does:

• Provides the pivot point for the refrigerator door, enabling smooth opening and closing
• Maintains door alignment to help the gasket seal evenly and preserve internal temperature
• Replaces worn, bent, or broken hinges that cause sagging, scraping, or noisy operation
• Helps prevent uneven wear on the door and stops abnormal rubbing against the cabinet

• One replacement door hinge

• Designed to mount in the original hinge location; hardware may be required if original fasteners are damaged
• Power off the appliance and remove contents from the door area as needed for safe access
• Support the door during removal/installation to avoid damage or personal injury

This wire harness routes power and signals between a dryer's control and components for reliable operation. It replaces damaged or frayed wiring to restore proper electrical connections and help eliminate intermittent faults. What it does

• Provides the factory wiring connections between control, motor, heating and safety components
• Restores lost or intermittent power caused by broken, burned, or corroded wires/connectors
• Prevents arcing and shorts when old wiring shows visible damage
• Ensures correct signal routing for controls and safety switches

• One complete wire harness assembly as shown

• Always disconnect power (unplug or shut off breaker) before starting service
• Route harness away from sharp edges and heat sources; secure with existing clips or ties
• Replace terminals or connectors that are melted or damaged to avoid future failures

This ice door foam assembly replaces the insulation inside the refrigerator ice door to help maintain cold temperatures and reduce frost and condensation around the ice area. Proper insulation helps the ice system run more reliably and stay drier. What it does:

• Provides thermal insulation inside the ice door to reduce heat transfer
• Helps minimize frost buildup and moisture around the ice dispenser/bin
• Supports stable ice storage temperature for better ice quality
• Restores the door's insulated seal when the original foam has deteriorated

• One ice door foam assembly

• Disconnect power to the appliance before starting any repair
• Remove ice bin/door trim per manufacturer instructions to access the foam
• Handle carefully and align foam into the door cavity; some models use adhesive or clips

This OEM wire assembly routes power and signals to the refrigerator pantry compartment so lights, sensors, and controls receive reliable connections. Replaces a damaged or worn pantry harness to restore proper electrical continuity and component operation. What it does:

• Connects pantry compartment components (lights, sensors, controls) to the main wiring harness
• Restores electrical continuity when a broken wire or connector causes intermittent or no power
• Helps eliminate pantry light failures, sensor/thermostat communication issues, and related symptoms
• Provides factory-style connectors and routing for a clean, secure fit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Inspect connectors and routing; match original connector orientation and secure with existing clips or ties
• Do not splice or modify wiring; use the exact replacement harness for proper fit and function

Size: 1/4 lb.

Size: 1/4 inch.

The door gasket is an OEM part for Whirlpool refrigerators. It forms a seal between the refrigerator door and body, working to ensure peak cooling and energy efficiency. This rubber gasket acts as insulation, preventing warm air from entering the refrigerator compartment each time the door is opened.

Causes of a bad door gasket can include cracks, tears, or compression from repeatedly opening and closing the refrigerator door over an extended period of time.

Symptoms of a bad door gasket include:

• Inefficient cooling and higher energy costs
• Warm air leaking into the refrigerator
• Moisture buildup or frost inside the body
• Difficulty properly sealing the door shut

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM replacement part for Whirlpool refrigerators. It is responsible for controlling the flow of water into the refrigerator, supplying water to the ice maker and water dispenser.

Symptoms of a need to replace the water inlet valve include:

• No water flow to the ice maker or water dispenser
• Leaks or water puddling near the valve
• The ice maker not producing ice or producing insufficient ice

Causes of a bad water inlet valve can include sediment buildup or clogging, mechanical failures due to age or wear, or electrical malfunctions preventing the valve from opening and closing properly.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Fill Tube Assembly is an OEM part for Whirlpool refrigerators. It is responsible for transporting water from the water supply to the ice maker. The fill tube allows the ice maker to receive a constant supply of water needed to produce fresh ice.

Causes of a bad fill tube assembly can include cracks, holes or kinks developing over time, which impair proper water flow to the ice maker. Mineral buildup or sediment clogs can also restrict water flow through the tube.

Symptoms of a bad fill tube assembly include:

• Ice maker not producing ice or producing less ice than normal
• Ice cubes appearing partially formed or mushy
• Water leaks from the ice maker area
• Ice maker is making unusual noises during operation

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Freezer Drawer Gear Clip is an OEM part for Whirlpool refrigerators. It is designed to secure the gear mechanism that allows the freezer drawer to slide in and out smoothly. This clip ensures that the drawer operates efficiently, providing easy access to the freezer compartment.

Causes of a bad gear clip can include wear and tear from regular use, damage due to overloading the drawer, or breakage from accidental impact. A faulty gear clip can impair the drawer’s movement and make it difficult to open or close properly.

Symptoms of a bad refrigerator freezer drawer gear clip include:

• The freezer drawer not sliding smoothly
• Difficulty in opening or closing the drawer
• The drawer coming off its track
•  Unusual noises during the drawer’s operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory screw fastens appliance components securely. Replacing a missing, stripped, or rusty screw helps stop rattles, keep panels and brackets aligned, and restore a solid, as-designed fit.

• Secures panels, brackets, and trim to the appliance cabinet or frame
• Helps maintain alignment and reduce vibration or rattling noises
• Replaces damaged, corroded, or missing hardware
• Can resolve loose or shifting components

• Disconnect power and shut off gas/water to the appliance before service.
• Use the correct driver; start threads by hand to avoid cross-threading and do not overtighten.
• Install in the original location and match the OEM fastener type specified in your model's parts diagram.

The Ice Door is an OEM part for Whirlpool refrigerators. It is responsible for sealing and dispensing ice from the ice maker compartment. It allows for smooth and controlled release of ice cubes or crushed ice through the dispenser chute, providing you with convenient access to refreshing ice whenever you need it.

A bad ice door assembly can occur due to wear and tear, damage, or malfunctioning components. If you notice symptoms such as ice clumping together, ice melting or leaking from the dispenser area, or the dispenser not closing properly, it may be time to replace the ice door assembly.

Symptoms of a bad ice door assembly include:

• Ice clumping or sticking together
• Ice melting or leaking from the dispenser area
• Dispenser not closing or sealing properly

Repair your refrigerator's ice dispenser by replacing the faulty or damaged ice door assembly with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This door gasket is a direct-fit sealing part that restores a tight seal around the appliance door to reduce airflow and heat loss, helping the unit run more efficiently and quietly. Designed for straightforward replacement where the original seal is worn or torn. What it does:

• Forms a continuous seal around the door to help keep heat, air, and moisture inside the appliance.
• Helps address symptoms such as visible gaps, ripped or flattened seal material, reduced temperature retention, or increased run times.
• Prevents drafts and minimizes energy loss from leaks around the door edge.
• Restores proper door closure and helps reduce noise caused by an improperly sealed door.

• One door gasket

• Always disconnect power (and gas if applicable) and allow the appliance to cool before starting work.
• Inspect the door frame and mounting surfaces; clean debris and old adhesive before installing the new gasket.
• Use common hand tools for removal and installation; avoid stretching the gasket excessively to prevent damage.

The Dispenser Drip Tray is an OEM part for Whirlpool refrigerators featuring built-in water dispensers. Located underneath the outlet spout, it collects any accidental water overflow or spilled cubes to prevent messes. 

Causes of a bad dispenser drip tray involve cracks interfering with its collection surface, or warping preventing it from fully guiding water into the pan below. Damage risks difficulties. 

Symptoms include:

• Water collecting outside the tray area on the cabinetry below
• Dispenser outlet jams from backflow during partial fills  
• Ice cube spills create a slipping hazard on the floor
• Increased effort required to avoid messes during dispensing

This OEM Whirlpool part is also compatible with some GE, Kenmore, and LG refrigerator models.