Krfc704fss-01 Parts

This solenoid is the electromechanical actuator that opens and closes a valve or latch to control flow or movement inside compatible appliances. Replacing a worn solenoid restores reliable on/off operation and responsive dispensing or cycling. What it does:

• Converts electrical signals into mechanical motion to open or close a valve or latch
• Controls water or ice fill cycles, dispenser flow, or other timed movements in the appliance
• Commonly linked to symptoms like no water/ice dispensing, intermittent operation, or a clicking/no-response during a cycle
• Works with the appliance control to ensure precise on/off control where used

• Disconnect power to the appliance before starting any repair
• If the solenoid controls water, turn off the water supply and relieve pressure before disconnecting lines
• Handle electrical connectors carefully; avoid pulling on wires—disconnect at the plug
• Verify correct part fit and function after installation; manufacturer instructions for detailed service procedures

The Ice Chute Mounting Plate Assembly is an OEM part for Whirlpool refrigerators. It is responsible for securely holding the ice chute in place, ensuring proper alignment and smooth dispensing of ice.

A bad ice chute mounting plate assembly can occur due to regular use, accidental damage, or wear and tear over time. If you notice issues such as ice not dispensing properly, the chute becoming loose or misaligned, or water leaks around the ice dispenser area, it may indicate a problem with the mounting plate assembly.

Symptoms of a bad ice chute mounting plate assembly include:

• Improper or inconsistent ice dispensing
• Loose or wobbly ice chute
• Water or drips around the ice dispenser area

Replace your faulty ice chute mounting plate assembly with this genuine OEM part to restore your refrigerator’s dispenser. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The UI Control Board is an OEM part for Whirlpool fridge displays. It processes inputs from touch buttons to manage temperature zones, lighting, and dispenser functions. 

Causes of failure relate to damage from prolonged exposure to ambient temperatures inside fridges. Regular thermal stresses can degrade sensitive electronic connections.

Symptoms of a bad UI control board include:

• Non-functional touchpad buttons   
• Inability to select temperatures or modes
• Faulty or blank control screen 
• LED lights or dispensers stopped working

This OEM replacement is compatible also with Maytag, KitchenAid, Jenn-Air and Kenmore fridges.

Shield that protects internal appliance components by keeping debris, heat, and moving parts away from vulnerable areas. Helps reduce rubbing noise and contact wear when installed correctly, supporting reliable operation and part longevity. What it does:

• Protects wiring, sensors, and adjacent parts from debris and incidental contact.
• Keeps airflow or heat directed away from sensitive components where applicable.
• Helps prevent rubbing, rattling, or damage caused by loose or exposed parts.
• Reduces risk of further component wear when the original shield is cracked, bent, or missing.

• Disconnect power (unplug or shut off circuit) before inspecting or replacing this part.
• Use the appliance service manual or diagram to locate correct mounting points and hardware.
• Reuse original screws/clips only if undamaged; replace fasteners if they are worn or broken.

This pad cushions and supports appliance components to reduce vibration, noise and rubbing while protecting finishes. It replaces worn or missing pads to help restore smooth, quieter operation in compatible Whirlpool appliances. What it does:

• Cushions moving parts and prevents metal-on-metal contact that causes noise or scraping
• Helps stabilize panels, drawers or assemblies for improved fit and alignment
• Reduces vibration and rattling during operation
• Protects painted or finished surfaces from wear and chipping

• Disconnect power and water (if applicable) before servicing the appliance
• Remove any trim or access panels needed to reach the pad location
• Clean mating surfaces and press or seat the pad into the designated location; replace any adhesive if the original was bonded

The Door Switch is an OEM part for Whirlpool-brand French door refrigerators. Located inside refrigerator door frames, it functions to detect the opening and closing of doors.

Causes of a bad door switch failure can include cracks in wiring from repeated door flexing or moisture/debris buildup inside the sensitive contact points over time. 

Symptoms of a bad door switch include:

• Interior lights failing to illuminate on door opening  
• Refrigeration system running constantly 
• Door alarm incorrectly detecting doors as ajar

Replacing with this OEM switch helps optimize efficiency and restores the alerts homeowners rely on. Compatible also with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore French door models.

This shelf stud is a small support piece that secures a refrigerator shelf in place, keeping glass or wire shelves stable and aligned for safe storage. It restores proper shelf seating and helps prevent slipping or tilting. What it does:

• Provides a mounting point that holds the shelf edge or bracket in position
• Keeps shelves level to prevent stored items from sliding or tipping
• Common replacement when a stud is cracked, broken, missing, or worn
• Helps restore safe shelf operation after damage or impact

• Disconnect power or unplug the appliance before servicing to reduce risk of electrical shock.
• Remove the shelf and any items from the area before replacing the stud.
• Press or snap the stud into the shelf frame location; if fasteners are present, secure per manufacturer instructions.

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

This adjustable leveler threads into the base of your appliance to set height and keep it stable. Replacing a worn or missing leg helps reduce wobble and vibration and restores proper leveling for smooth, reliable operation. What it does:

• Threads into the cabinet base to fine-tune height and level front-to-back and side-to-side
• Helps reduce rocking, vibration, and rattling noises during use
• Can improve alignment and closure on units that are out of level
• Common failure signs include a cracked foot, stripped threads, or a missing leg

• One leveler

• Disconnect power; turn off water supply if applicable before moving the appliance
• Use a helper and protect flooring when tilting or positioning the unit
• Start threads by hand to avoid cross-threading; finish adjustment with a wrench as needed
• Level all corners until stable; recheck after loading or repositioning the appliance

This door bumper cushions and stabilizes the appliance door to reduce noise and wear from slamming. It helps the door close smoothly and maintain proper alignment for reliable operation. What it does:

• Absorbs impact to prevent metal-on-metal contact and reduce slamming noise
• Helps the door sit evenly to improve latch engagement and sealing
• Reduces vibration and rattling during operation
• Simple replacement that restores proper door feel and alignment

• Disconnect power to the appliance before starting any repair
• Access the bumper by opening the door; some models may require removing the door or inner panel
• Press or snap the bumper into the locating hole or slot until secure; replace any retaining clips if present

The Drain Funnel is an OEM part for Whirlpool French door refrigerators. It serves as the sloped plastic strainer that guides water from the evaporator coils s it into the drip pan below. 

Causes of a faulty Drain Funnel include cracks or punctures developing from continuous use transferring water weight. Mineral deposits or food particles that gradually collect on funnel surfaces could restrict proper drainage as well over time.

Symptoms involve: 

• Puddling or spilled water inside refrigerator interiors
• Uncontrolled leaks potentially damaging other components  
• Restricted airflow if funnel clogs from sediment buildup
• Musty odors developing without efficient drainage management

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This decorative trim piece restores the finished appearance and edge protection on the appliance. It replaces damaged, scratched, or loose trim to improve the unit's look and cover exposed seams. What it does

• Provides a clean, finished edge to panels or openings and restores original appearance
• Covers gaps and hides fasteners or cut edges for a factory look
• Replaces trim that is cracked, bent, scratched, or otherwise cosmetically damaged
• Helps keep moisture and debris from gathering along the edge it covers

• One trim piece

• Turn off and unplug the appliance or disconnect power before starting repairs
• Remove adjacent panels or components as needed to access mounting points
• Use appropriate hand tools; avoid sharp force that could damage the new trim
• Test-fit before final fastening and retain original hardware for reinstallation if reusable

This shelf stud secures a refrigerator shelf to the cabinet liner so the shelf stays level and stable. Replaces a cracked or missing stud to restore proper shelf seating and prevent sudden shelf drops. What it does

• Locks a refrigerator shelf into the cabinet liner and holds the shelf edge in place.
• Prevents shelf sagging, shifting, or sudden falls when loading items.
• Stops rattling or loose shelf movement caused by a broken or worn stud.
• Simple replacement fix when a plastic stud is cracked, stripped, or missing.

• Unplug the appliance or shut off power before service to avoid electrical hazard.
• Remove the shelf or glass first to access the mounting point; handle glass with care and wear gloves.
• Press or snap the stud into the liner hole until fully seated; avoid forcing or over-stressing the liner.

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

The Hinge Cover is an OEM component used in Whirlpool refrigerators. It is a sleek plastic cover that fits neatly over the hinge pins and mounting bracket of the refrigerator door. 

Causes of a bad hinge cover include cracks or breaks from accidental impact over time. Normal wear and exposure to household elements can also cause fading or discoloration of plastic.

Symptoms of a defective hinge cover are:

• Exposure of internal mounting hardware   
• Gaps appearing where the cover once fit
• An undesirable appearance around the doorframe

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This pivot block is a small mounting support that holds a pivot or hinge shaft in place, restoring proper alignment and smooth movement for the moving assembly. It's a direct-replacement mechanical support piece. What it does:

• Supports and stabilizes a pivoting shaft or hinge so the assembly moves smoothly
• Prevents excessive play or misalignment that can cause rubbing, grinding, or uneven motion
• Helps reduce vibration and noise coming from a loose or worn pivot point
• Restores proper component positioning so doors, drums, or linkages close and operate correctly

• One pivot block

• Disconnect power to the appliance before starting any repair
• Access may require removing a panel or trim; keep track of fasteners and fastener locations
• Use basic hand tools; avoid forcing parts—replace any damaged clips or fasteners
• Check adjacent parts (shaft, bushing, or bracket) for wear