Krfc704fss-01 Parts

This replacement NC light switch restores proper operation of the appliance's light circuit, helping the light turn on and off as designed for safe use and visibility during service or operation. What it does

• Completes or breaks the light circuit when the door or control triggers the switch.
• Restores interior or indicator light operation that is dim, flickering, or nonfunctional.
• Prevents the light from staying on continuously if the switch is failed closed.
• Matches the OEM function for reliable, long-term use when replacing a worn switch.

• Disconnect power before servicing to avoid shock or injury.
• Access may require removing panels or door trim—refer to your model's service manual or tech sheet.
• Inspect wiring and connectors; replace any damaged harnesses or terminals.

This front grille restores the exterior lower trim on compatible Whirlpool refrigerators, improving appearance and protecting internal components. It replaces a cracked or broken grille so your appliance looks finished and grille openings stay clear. What it does

• Covers and protects the refrigerator toe/vent area from debris and damage
• Restores finished appearance when the original grille is cracked, broken, or missing
• Helps maintain proper venting path by keeping the grille opening intact
• Common symptom: visible cracks, loose fit, or a missing lower trim piece

• One front grille

• Disconnect power to the appliance before starting any repair
• Typically installs with clips or screws—do not force the grille into place
• Keep hardware from the original part; replace any broken clips with OEM equivalents

This water tube routes water between the household supply and your appliance's dispenser or ice maker so water flows where it's needed. Replacing a damaged tube restores reliable water delivery and helps prevent leaks. What it does:

• Carries water from the inlet to the dispenser or ice maker assembly
• Prevents leaks when intact; cracks or holes can cause visible drips or puddles
• Supports proper filling of the ice maker and dispensing functions
• Can become brittle or clogged over time, interrupting water flow

• One water tube

• Shut off the household water supply and unplug the appliance before starting
• Inspect and replace any worn clamps or seals when installing the tube
• Route the tube along the original path and check for kinks that could restrict flow
• After installation, restore power and water, then check carefully for leaks

This door gasket seals the refrigerator/freezer door to keep cold air in and humidity out, helping the appliance run efficiently and protecting stored food. It replaces a torn, warped, or leaking seal. What it does:

• Forms an airtight seal around the door to reduce frost buildup and prevent warm air leaks
• Helps maintain consistent internal temperatures for food safety
• Can reduce excessive run time and cycling caused by a failing seal
• Stops drafts, moisture, and odors from entering the compartment

• One door gasket

• Remove old gasket and clean mating surfaces before installing the new gasket
• Align gasket into the door channel and press firmly; some models require softening with warm air for a snug fit
• Check seal by closing the door and inspecting for gaps; adjust as needed

This mounting bracket secures internal components and panels to restore proper alignment and stability. It replaces a worn or broken support bracket to reduce vibration and keep parts seated correctly. What it does:

• Secures internal panels or components to the appliance frame to maintain proper alignment
• Prevents rattling and vibration caused by loose or damaged supports
• Helps keep connected parts seated so controls and panels operate smoothly
• Supports proper fit of adjacent components after repair

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools to remove fasteners and transfer the bracket to the replacement
• Keep hardware organized and reuse only undamaged fasteners; replace stripped or damaged screws
• Secure fasteners evenly to avoid stress on surrounding parts

The Valve is an OEM component specifically designed for Whirlpool refrigerators. It regulates refrigerant flow to optimize cooling performance.  

Causes of a faulty valve include deterioration of seals from continuous exposure to refrigerants. Mineral buildup over many years may cause obstruction.

Symptoms of a bad valve include:

• Inconsistent temperatures as refrigerant delivery fluctuates
• Frost or ice accumulating in freezing compartments  
• Appliance unable to maintain safe chilled storage zones 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:

• Holds the evaporator coil/assembly or associated covers in place
• Prevents vibration, noise, and contact between the coil and cabinet parts
• Helps maintain consistent airflow for reliable cooling performance
• Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator

• Disconnect power before servicing the appliance
• Handle evaporator and surrounding fins carefully; they are sharp and fragile
• Verify clip orientation against the OEM diagram before fastening

This refrigerator door gasket creates an airtight seal around the fresh-food door to help maintain proper cooling and reduce energy waste. Replace a torn, compressed, or leaking gasket to restore a snug door seal and consistent temperatures. What it does:

• Seals the fresh-food compartment door to keep cold air in and warm air out
• Helps prevent frost buildup and moisture inside the refrigerator
• Reduces strain on the compressor caused by air leaks
• Addresses symptoms like visible gaps at the door, cold air loss, excess frost, or higher energy use

• Disconnect power to the refrigerator before beginning work
• Clean the door flange and remove any old adhesive or residue before installing
• Press the gasket firmly into the channel, starting at the corners and working around the door for an even fit
• After installation, allow the gasket to form and check for a continuous magnetic seal

This replacement door gasket seals the appliance door to help prevent water or air leaks and maintain proper temperature and performance. It restores a tight seal to reduce leaks, drafts, and energy loss. What it does:

• Creates a watertight/airtight seal around the appliance door to prevent leaks and maintain temperature
• Helps stop drafts, odors, and moisture from escaping or entering the cabinet
• Common symptom: visible tears, rips, or a flattened seal at the door edge
• Common symptom: water pooling around the door or difficulty maintaining set temperature

• One replacement door gasket

• Disconnect power and water before starting any repair
• Remove the old gasket carefully to avoid damaging the door flange; align and seat the new gasket fully in the channel
• Some installations may require retaining screws, clips, or light adhesive—use only manufacturer-recommended fasteners if specified

This bracket is a replacement mounting support designed to secure internal components and assemblies in place, restoring proper alignment and stability for the appliance. It's a direct-fit replacement when the original bracket is damaged or missing. What it does:

• Provides a secure mounting point for internal panels, housings, or components
• Restores alignment and reduces vibration or movement of attached parts
• Helps prevent wear or damage caused by loose or misaligned components
• Common symptom: rattling, shifting parts, or loose paneling near the bracket area

• One bracket

• Remove power supply (unplug appliance or switch off breaker) before beginning work
• Use appropriate hand tools; avoid over-tightening fasteners which can deform the bracket
• Replace only the damaged bracket; orientation matches the original before final fastening

This stop pan is the molded under-tub drip tray that catches and directs small leaks away from the appliance to help protect floors and cabinet interiors. It's a simple replacement that restores the appliance's built-in leak control pathway. What it does:

• Fits under the tub to collect and channel incidental water from seals or fittings
• Helps prevent water from pooling under the appliance and reaching floors
• Commonly replaced when cracked, warped, or when leaks are visible beneath the appliance
• Compatible with appliances that use a molded under-tub drip tray design

• One stop pan

• Disconnect power and water supply before beginning any service
• Remove access panels or kickplate to reach the old pan; support the appliance as needed
• Compare the new pan to the old part before final installation